Wera : Coo

[mobiledynamics]

Can anyone in the know give a quick synopsis of COO of Wera Products

Sockets: Taiwan
Drivers : Germany or CZ
Long Driver bits or just bits in General ?

I'm going to have to check to see if I still have my Joker packaging in the recycle bin to see COO

Just curious...

 

[T45]

Bits are Czech,

Wera was sourcing stuff for snap on, see specification tabs on page below.

https://store.snapon.com/Diamond-Tip-Bits-Bit-Diamond-Phillips-1-P650160.aspx

These are the wera diamond bits, presumably their top of the line.

 

[Dave455]

Here in the U.K. they are all marked with C.O.O.

Sockets, and ratchets etc, are all made in Taiwan. No better, and possibly a notch worse, than any other Taiwanese tool!

Screwdrivers and screwdriver bits are made in Czech Republic. I've found that the quality of the screwdriver blades is really quite good, bearing in mind these are a 'mid price' tool. I don't particularly like the handles. The shape is o.k. but the soft panels are just too soft for most purposes and either get gritty or chewed up!

The screwdriver bits are O.K. But PB Swiss are much longer lasting!

I havn't seen the Joker here, but almost certainly Taiwanese!

 

[Jure]

Here in the U.K. they are all marked with C.O.O.

Sockets, and ratchets etc, are all made in Taiwan. No better, and possibly a notch worse, than any other Taiwanese tool!

Screwdrivers and screwdriver bits are made in Czech Republic. I've found that the quality of the screwdriver blades is really quite good, bearing in mind these are a 'mid price' tool. I don't particularly like the handles. The shape is o.k. but the soft panels are just too soft for most purposes and either get gritty or chewed up!

The screwdriver bits are O.K. But PB Swiss are much longer lasting!

I havn't seen the Joker here, but almost certainly Taiwanese!

joker's are made in cz as well