Wera Kraftform Screwdriver Diameter

[Tennessee Cattleman]

(Problem Solved, Disregard) Wera Kraftform Screwdriver Diameter

I need the actual diameter of the shaft of a Wera 032001 3 x 80mm Stainless Steel Slotted Screwdriver and a Wera 032020 #0 x 60mm Stainless Steel Phillips Screwdriver. Special application is the reason needing the diameter. They are listed as 3.0 mm and 1/8 inch. 1/8 inch will be just a little big. Thanks to anyone willing to measure.

 

[KCTool_Official]

Hey! I put a pair of digital calipers on the shaft and it came out to:

0.116 inches or 2.95 mm.

Hope that helps!

 

[Tennessee Cattleman]

Thanks for the info KCTool. I decided 3.0 mm would be a pretty tight fit. Ordered a 2.5 mm diameter shaft Stahlwille from you through the Bay earlier today.

 

[KCTool_Official]

Awesome! Glad we could help!