To avoid these ads, REGISTER NOW!

West Side Story

To avoid these ads, REGISTER NOW!
OP
S

Skeetobite

Well-known member
Joined
Feb 8, 2014
Messages
706
Location
SE, MI
Thanks guys. It's a battle, but worth fighting.

I'm going to rapid fire a few posts here with little commentary as I am up to my *** in alligators at the moment.

Updated closet. Added a light and GFI power. Room underneath for a rubbermaid bin. Still needs rubber base moulding installed.

closet.jpg
 
To avoid these ads, REGISTER NOW!
OP
S

Skeetobite

Well-known member
Joined
Feb 8, 2014
Messages
706
Location
SE, MI
Built a "bar height" standing workbench for my wife. She started moving her jewelry stuff in before I could even clean it. Wow.

Converted all lighting over to LED, including the 2,700k spots above her bench.

FYI - HD is now selling birch workbench tops. They're not the most durable but, you're welcome.

standup.jpg


Finally able to get the hydroponics system up and running. Moved the system to this garage since I have easy access to water.

I put a 10'X15' pop up over the table in case I need to cover it to control humidity during the winter months.

New blinds throughout.

newhydro1.jpg


All systems go, with no leaks (whew)

newhydro2.jpg


Baby test lettuce. This is red butterhead lettuce, about 10 days old.

newhydro3.jpg


Don't cat call; the ceiling work is scheduled for later :thumbup:

Added a ceiling fan and two LED fat panels above my wife's workspace.

eastfan.jpg
 
OP
S

Skeetobite

Well-known member
Joined
Feb 8, 2014
Messages
706
Location
SE, MI
The furnace has always been plugged in to one of the GFCI wall plugs, which bugged me for 6 years. Ran a new, dedicated circuit.

These pics were taken before the final painting was finished.

eastplug.jpg


Added two dedicated 20amp circuits for the hydroponics lighting.

20amp.jpg
 
To avoid these ads, REGISTER NOW!
Top Bottom