To avoid these ads, REGISTER NOW!

What are you doing for compact step ladders / step stools?

To avoid these ads, REGISTER NOW!

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,670
Location
Tacoma, Washington
^ ahhh so... handle folds down and out of the way! nice!

handle up: I would trip on it and fall on my face.

(12 years of ballet didn't do any good in that respect.)
 
OP
A

Armatron

Well-known member
Joined
May 16, 2013
Messages
125
^ ahhh so... handle folds down and out of the way! nice!

handle up: I would trip on it and fall on my face.

(12 years of ballet didn't do any good in that respect.)

Here are the haikos. I like the haikos, but they are honestly sort of heavy for as small as they are. And surprisingly the cheaper white/steel one folds up quite a bit thinner. I feel like they're overpriced for the build quality but will keep them for kitchen/office. Jumbo step is heavier but not incredibly so. Like 10-15% heavier in the hand, and a solid 2x-3x as sturdy
 

Attachments

  • IMG_3902 Large.jpeg
    IMG_3902 Large.jpeg
    341.8 KB · Views: 64
  • IMG_3903 Large.jpeg
    IMG_3903 Large.jpeg
    235.5 KB · Views: 56
  • IMG_3904 Large.jpeg
    IMG_3904 Large.jpeg
    287.1 KB · Views: 54
Last edited:

Vslewnyy

New member
Joined
Jun 27, 2024
Messages
2
I was in the middle of a DIY project and needed to get up to some high shelves, but my old stool just wasn’t cutting it anymore—it felt so flimsy. Ended up getting a compact step ladder, and it’s made things way easier. It’s light enough to carry around, but sturdy enough that I don’t feel like I’m going to fall off it. Found a couple of good options online, but honestly, this ladder here did the trick. Super handy for those quick fixes around the house, and it tucks away nicely without taking up much space.
 
Last edited:

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,670
Location
Tacoma, Washington
Funny this came back up. I was up at my Mom's and washed her van after the big windstorm, and used a 5-foot folding step-ladder my sister must have just procured, but neglected to note the brand name. White-painted steel frame. Black rubber-covered steps. Folded up and was maybe all of 3 inches thick when folded. I'll try to remember to grab the brand next time I'm up there. Worked great for washing the roof of the van. MUCH lighter and easier to jockey around than a conventional 5-foot painter's ladder.
 

MovingAlong

Well-known member
Joined
Aug 17, 2013
Messages
1,212
Certainly have plenty of full-size ladders for full-size work, but for a "compact"? Love this Cosco ladder. Not the two step, the three step...

1730207491510.png

May not be right for you, but that wasn't the question. :thumbup:
 

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,132
Location
SE MI
I've got this model in my shop, Gorilla GLHD-2. For me, it's all about the light weight, quick setup, and compact folded size. It was reasonably priced ($44) and has a lifetime warranty
I might have to get one on those, even though I have something similar ! The one I have, is NOT lightweight (wood on a steel frame) and the assist handle appears to be lower.
 

jayemm

Well-known member
Joined
Dec 18, 2018
Messages
1,520
Location
up high down low

tarbellb

Well-known member
Joined
Apr 17, 2011
Messages
5,746
Location
Oregon
Certainly have plenty of full-size ladders for full-size work, but for a "compact"? Love this Cosco ladder. Not the two step, the three step...

1730207491510.png

May not be right for you, but that wasn't the question. :thumbup:
EDITED: I was mistaken I have a Rubbermaid ladder, very similar but def different.

I have one of these, it's just ok. Nice for lite duty task, easy to move around due to weight, but it likes to kick when shifting around.

Not recommended for work task or heavier users
 
Last edited:

cannuck

Well-known member
Joined
Nov 30, 2021
Messages
4,609
Location
Rural SK
My shop helper just turned 13 and can't reach top of my toolbox nor second shelf above workbenches so I have 2 x single steps and a 3 step - that take up a lot of space but I find I use a fair bit - as well as a single step that hangs over tire to work under hood on F450 and Ram3500. Can't imagine going back to a time without.
 
To avoid these ads, REGISTER NOW!

rust in the eye

Well-known member
Joined
Oct 2, 2017
Messages
2,757
Location
Chicagoland
Is a four footer too big/bulky for you?
I love my plain old 4' fiberglass step ladder. On the second step you have something to lean against when your hands are full and higher potential reach than most suggested here.
 

Beerhippie

Well-known member
Joined
Oct 13, 2023
Messages
9,714
Location
Far NE Oregon
Who washes the roof of a van? The only folks that see the roof my Vanagon are driving 18-wheelers.

I used milk crates and 5-gal buckets for years. One day, I stepped onto a 5-gal bucket and, as I put my full weight on my foot, it went right through. Not only did that result in a fall, but the plastic bucket was now firmly stuck over my foot--the broken pieces opened like petals and would just dig into my calf if I tried to remove my foot! to had to cut the bucket off, while suffering the slings and arrows of ridicule from my co-workers.

Now I mostly use Werner step ladders for the little stuff. OSHA likes them as long as I'm not working on electrical stuff. We have some solid FRP step ladders for that--they weigh a ton.

I recently bought one of these:

53023939198_275a0390d6_b.jpg

for access to the roof rack of my Toyota. Works great, packs small, very sturdy.
 

rust in the eye

Well-known member
Joined
Oct 2, 2017
Messages
2,757
Location
Chicagoland
Who washes the roof of a van? The only folks that see the roof my Vanagon are driving 18-wheelers.

I used milk crates and 5-gal buckets for years. One day, I stepped onto a 5-gal bucket and, as I put my full weight on my foot, it went right through. Not only did that result in a fall, but the plastic bucket was now firmly stuck over my foot--the broken pieces opened like petals and would just dig into my calf if I tried to remove my foot! to had to cut the bucket off, while suffering the slings and arrows of ridicule from my co-workers.

Now I mostly use Werner step ladders for the little stuff. OSHA likes them as long as I'm not working on electrical stuff. We have some solid FRP step ladders for that--they weigh a ton.

I recently bought one of these:

53023939198_275a0390d6_b.jpg

for access to the roof rack of my Toyota. Works great, packs small, very sturdy.
I'd have paid to see that! Sorry, well no its still hilarious as long as you weren't (surprisingly) hurt.
 

esben57

Well-known member
Joined
Feb 3, 2012
Messages
841
Location
Sheffield. England
Have an Abru 3 way ladder. Aluminium which works as extended ladder, step ladder and stairs ladder.
1730286978446.jpeg1730286934807.jpeg1730286646951.jpeg
Bit unstable but I persevere. This is a replacement for a similar ladder which came with a detachable tray for tools etc.
Damn tray was more an ejection system, and awkward in every sense of the word. Locating clip would detach without warning sending everything south. Weight distribution important - or get ready !
Just a tray FFS
Ended up in the bin.
 

mike93lx

ALLIANCE MEMBER
Joined
Dec 9, 2013
Messages
37,479
Location
Richmond, VA
I have one of these and 2 narrower Ones I like in the shop. Ihave a Werner folding fiberglass step ladder for taller needs and telescoping folding little giant style ones.
I have a gorilla that I like a lot. It was too tall for my last house (<8' ceilings and i'm 6'4") so I drilled out the rivets on the legs, cut them down on my meter saw and reinstalled them.
 
To avoid these ads, REGISTER NOW!
Top Bottom