You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
What is this bench buffer/grinder attachment?
- Thread starter 1982fxr
- Start date
Nutria
Well-known member
Not sure, but a first guess is a deburring point. Maybe Cratex.
WhoWhatNow
Well-known member
Tapered buffer wheel spindle
X2Tapered buffer wheel spindle
Shiftless
Well-known member
That’s a left handed buffing wheel spindle. There are fine threads on the taper that grab the center of a soft buffing wheel. There is a right handed one for the other end of the machine.
This style of mount is Ok for small wheels, maybe up to 6 inches.
This style of mount is Ok for small wheels, maybe up to 6 inches.
Their main purpose is quick change of wheels so you can switch between soft/coarse etc and change wheels for different types of abrasives when buffing different metals so you don't pollute your wheels with more than one type of abrasive. Pro stuff.
RTM
Well-known member
Geez, I didn't even think of that part. I grabbed one a while back, was the only one who recognized it as holding a buff. Now I will remember it only works on 1/2 of the tool. ThanksThat’s a left handed buffing wheel spindle.