What roller to use

[OneAkela]

I was reading an old thread from 2008 discussing the type of roller to use- nap, size, etc. I was wondering which of these would be preferable to spread epoxy:

Wooster Brush R232-18 1/4-Inch Nap Epoxy Glide Roller Cover, 18-Inch

or

Wooster Brush R207-18 Mohair Blend Roller Cover 1/4-Inch Nap, 18-Inch

How about a 14 inch roller?

 

[LegacyIndustrial]

Poly-Core, 1/4" nap, 18" or 9" depending on the size of the project and flatness of the floor.

 

[CamarosRus]

WOOSTER pro/doo-z RR 642 455mm 18" 3/8" NAP

Anybody a fan of these.............and what weenie rollers for cutting in next to the wall ??

 

[Houston Garage Floors]

I would go with a 3/8" nap for epoxy unless you were trying to put it on super thin

 

[c7fx]

Make sure it is a shed resistant roller or it will look like a cat rolled around on your floor

 

[CamarosRus]

I am asking pros for their opinion of the pro doo z above
or specific brand name info on their reccomendation

 

[ivinho]

I would also use a 3/8 for a thicker coating. Regardless of what you end up using make sure you roll it on duck tape first to get all the lint off. I used one from Lowes and had no trouble. I would highly recommend getting a 18" wih a pole if you have a large area.

 

[CamarosRus]

My installer suggests using the WOOSTER pro/doo-z RR 642 455mm 18" 3/8" NAP

Any pro concur