What takes 4k ft/lbs?...

[Buckgnarly]

What the hell takes a torque of 4k ft/lbs?!?!?!...


http://www.ebay.com/itm/Snap-on-Too..._Automotive_Tools&hash=item3cc9ddbd0d&vxp=mtr

 

[alan camby]

http://www.engineersedge.com/torque_table_sae_ftlbs.htm
Like to see a torque wrench for the 2" grade 8 at 8200ft/lbs

 

[E.T.Privott]

sad to say but sometimes it takes alot to keep a woman quite after she gets on a tear, when she gets mad and just can't stop telling you that she's not happy !!!! i know...i know... your mother was right, your right, your girl friends are right, i know... i know i'm steal a big.... i know.. i know... yes i know !!!! and you ask what needs a 4k wrench ????

 

[Thumper]

a big *** bolt........!

 

[t100]

Dozers?

 

[A_Pmech]

That's for little bolts.

Big bolts get the hydraulic wrench. Hytorc makes this model in sizes to 140,000 ft. lbs:

 

[coldfusion21]

We have a part at work that is suppose to be torqued to 6k ft lbs before being machined. We use the 1" cp impact and call it good.

 

[metaleltr]

Something tells me that doesn't quite meet the spec!

 

[bsaint]

On a PW jet engine, there are these rods that they stretch to an unbelievable length relative to what they start with using high torque wrench.

 

[theoldwizard1]

"Jesus" nut on helicopter.

Rod bolts on large diesel engines (think ships).

 

[skyking]

OPRAH 's girtle !

 

[WallynSC]

Nuclear energy, turbines, generators. Poor guys before Hytorc.

 

[treky67]

There are not to many bolts on a stamping press that don't take 4000 ft/lbs.

 

[KinzeMech]

Nothing I ever intend to turn a wrench on....

 

[CAOS]

Nuclear energy, turbines, generators. Poor guys before Hytorc.

http://www.pickford.com/plantmaint/hydratight-torque-rental.htm

My favourite tool, I do not miss the days of swinging a hammer wrench.

 

[welder4956]

Something tells me that doesn't quite meet the spec!

Especially since a 1" CP only has a maximum of 1200 ft-lbs of torque. Hardly enough for something that requires 6k.

 

[Jbullfrog]

Especially since a 1" CP only has a maximum of 1200 ft-lbs of torque. Hardly enough for something that requires 6k.

I've got a 796 CP that puts out 2100 with a 1/2" hose.

 

[osborn.ozzy]

Honda crank bolts

 

[bigcaddy]

Honda crank bolts

I came here to post the exact same thing!

 

[welder4956]

I've got a 796 CP that puts out 2100 with a 1/2" hose.

That's a hoss there! Still would not be enough for something that requires 6k though.

 

[srmofo]

That's for little bolts.

Big bolts get the hydraulic wrench. Hytorc makes this model in sizes to 140,000 ft. lbs:

quote from the end of the video, "If the nut will still not break loose at 10,000 psi, you will need a larger wrench"

 

[Slingshot Engage]

When fasteners get that big supernuts are often used.