what uses a 4.5mm socket?

[cbracer]

Curious what you've found that requires a 4.5mm socket? I know of lots of 5.5.

 

[walwalka]

4.5 mm screw holding in extended cab ranger rear speakers...

 

[JAKE-THE-TOOL-MAN]

Taking apart some dashes

 

[House Sparrow]

I haven't encountered any yet, but I'll be getting the socket. I hate running into a fastener and then finding out that I don't have the correct tool for it. It almost never happens, but ***** when it does. A 5 would probably work, but could strip a tight or rusty 4.5.

The closest thing I've seen to this size is a 4mm on some headlight adjusters.

 

[M-technik-3]

Metric hose clamps.

 

[djkeev]

I don't know but it fills up those darn Hansen socket organizers! I have one if you need to borrow.

Dave

 

[RPH]

Plenty on the French and Norwiegen converters I work on. All the boards are mounted with them.

 

[bsaint]

Some electronics.

 

[JASTECH]

The hold down screws on ignition coils for the Z24.

 

[jethro29]

a lot of the under dash bolts and heater box screws on fords and chrysler vehicles.

 

[2mJps]

Fords I would love to know why they came up with 4.5 someone needs slapped.