Whats On Your Socket Wish List?

[Canadian Charlie]

I'm always looking for those tools I need to complete sets or just tools I need in general. EBay is my main source to find them and I was wondering what everyone needs



Here is my list

1/4" Drive

15mm shallow socket (bidding on one today)
5/8" shallow and deep sockets

3/8/" Drive

1/4" shallow socket (in the mail)
5/16" shallow socket (in the mal)
15/16" deep socket
1" deep socket

1/2" Drive

1" deep socket (got a bid on one today)




IMPACTS

3/8" Drive

11mm shallow swivel
1/2" shallow swivel
13/16" shallow Swivel
7/8" shallow swivel

1/2" Drive

10mm deep impact socket
18mm deep impact socket
20mm deep impact socket
23mm deep impact socket
25mm deep impact socket
27mm deep impact socket
18mm shallow impact socket
20mm shallow impact socket
23mm shallow impact socket
25mm shallow impact socket
1 1/16" deep impact socket
1 1/8" deep impact socket
1 1/4" deep impact socket
3/8" shallow impact socket
1 1/16" shallow impact socket
1 1/8" shallow impact socket
1 1/4" shallow impact socket



Thats all I need to fill up all 8 of my hansen trays


PS I also need the Snap On 23mm and 25mm wrenches

 

[rocco]

a set of 3/8 semi shallow metric in 12 point.

 

[wilbilt]

a set of 3/8 semi shallow metric in 12 point.

I have had a set of S•Ks, 9-19mm for many years. I like them a lot. Only complaint is that the 15mm has "spread" quite a bit, but I really shouldn't complain, as it has seen impact use.

 

[dink]

1/2" metric and sae impact sockets both deep and shallow

 

[ba614]

I'm still looking for that elusive chrome 6 point 1/4" drive X 5/8" deep socket to fill my Hanson tray.

I'll never buy anymore Hanson trays they either have to many sockets in the range or not enough places for the complete socket set. The 1/4" drive sets taught me.

 

[Larz]

1/2" drive standard shallow impact set and 3/8" standard shallow impact set.

 

[MXtras]

I need a new shoulder socket. My left one pops out every once in a while and it's out of warranty.....

Scott

 

[wythors]

I've got a hankerin' for a set of swivel sockets from the Craftsman catalog. I just may pull the trigger with the next gift card that comes my way for christmas.

 

[-lecroix-]

1/2 drive 6 point deep in SAE & Metric

 

[rocco]

I have had a set of S•Ks, 9-19mm for many years. I like them a lot. Only complaint is that the 15mm has "spread" quite a bit, but I really shouldn't complain, as it has seen impact use.

any idea where a canadian could buy a set?

 

[OctaneMotorsports]

any idea where a canadian could buy a set?

I believe www.thetoolwarehouse.com would have what you are looking for.

 

[OctaneMotorsports]

I'm still looking for that elusive chrome 6 point 1/4" drive X 5/8" deep socket to fill my Hanson tray.

I am about 90% I have one of those I could send to you...let me check, I will PM you.

 

[MAD]

any idea where a canadian could buy a set?

The SK web site lists some dealers in Canada:
http://www.skhandtool.com/index.cfm?tok=1&

Click on Dealer locator in the left hand menue. (direct links do not seem to work on skhandtool.com)

There may be more dealers than the web site shows. Only the major distributors are shown when I search my area (MA USA). The site does not show the local dealers that buy from the big distributors.