Still near $500 to L48.Everything is greatly inflated going to alaska due to shipping cost
Still near $500 to L48.Everything is greatly inflated going to alaska due to shipping cost
Yea, I did say it was expensive in my original post.Still near $500 to L48.
Maybe buy a clapped out concrete buggy and restore it?
$270 locally for the Rubbermaid version. 7.5 cuft. I like the handle style on a traditional wheelbarrow.
My wife wanted one of these just after we were married 20 years ago. It was over 200 dollars back then and I though it was incredibly expensive but it has held up wonderfully. I have moved tons of horse poo(4 of them), gravel and firewood over the years. Easy to dump when you want and doesnt when you don't want it to like a traditional wheel barrow. It has set outside to much as well but the plastic tub is still going strong.
Stable Mate smart cart.
I don't regret spending the money now with the service I have got from it.
It only cost a little more to go first class.
I have not used one of those but have used the rubbermaid carts in the factory, and they held up surprisingly well.$270 locally for the Rubbermaid version. 7.5 cuft. I like the handle style on a traditional wheelbarrow.
i want a 2.0 cubic foot wheelbarrow, i is tired of the five cu ft ones
At 6'2" I would think the metal brace across the wooden handles in front of the wheel would catch on the ground when you push it.I'm looking for a new wheelbarrow. I currently have a 6 cu ft steel tub one with one wheel and wood handles. The tub has a hole (I could patch it, I suppose) and the wood handles are warping and getting rough.
Anyone have any experience with the WORX WG050 Aerocart 8-in-1 Yard Cart?
https://www.lowes.com/pd/WORX-3-cu-ft-Steel-Wheelbarrow-Flat-Free-Tire-S/5001734723
The only issue I see for me is I'm 6'-2" and there are no pictures in any of the promo pictures or videos of anyone lifting this from the ground or standing next to it while it's resting on the ground. They are all shown wheeling it around. My concern is it might be too low. I typically use my wheelbarrow for hauling dirt/ground cover around and need to be able to comfortably load and unload it with a shovel, in addition to dumping it. I also mix concrete in it.
Six cu ft is getting to be too heavy. This one is about 3 cu ft, but seems shallow.
The other option is a 2-wheel one. Plastic or steel tub?
Thanks!


If you plan on working on any inclines, a single wheeled one has the major advantage cause you can keep it upright when going sideways. Also, you can ride a single wheel wheelbarrow up on a single plank. When we were pouring the concrete for some floor in our house years ago, I remember we set up a frame and planks and a pulley so one person would drive the wheelbarrow up the plank and another person would hook up a rope on the front and helped pull the concrete filled wheelbarrow up the plank via the pulley.The only complaint I have heard about the 2 wheeled version is they make wider turns, that's something I can live with because of the added stability, that, and it screams "amateur" to those who see you using it...![]()
OKIf you plan on working on any inclines, a single wheeled one has the major advantage cause you can keep it upright when going sideways. Also, you can ride a single wheel wheelbarrow up on a single plank. When we were pouring the concrete for some floor in our house years ago, I remember we set up a frame and planks and a pulley so one person would drive the wheelbarrow up the plank and another person would hook up a rope on the front and helped pull the concrete filled wheelbarrow up the plank via the pulley.
If you only need it on flat land, two wheels are probably fine or even better, but the single wheel version is a lot more versatile in my opinion.
The straight handle design is still so odd to me, if you can find a metal handle with a curve I'd definitely suggest you go for that! It looks like if you tip it too far forward, the front brace will quickly hit the ground (especially if you are pushing it uphill, or over any rocks or shallow stairs). Also, you can weld the metal one together so it's not juse screws holding it together. I guess they're mostly made with screws to be cheaper to ship around?
Sorry if you read my reply wrong, it was not meant as ill-natured in any way. I just wanted to add my thoughts.OK
Not sure why you quoted my post to add your wheelbarrow comments.
Most homeowners don't push a wheelbarrow uphill, across a slope, up a plank, full of concrete.
So, yea, why I said an amateur, as the OP seems to be a homeowner moving around the usual yard stuff.
Not sure why you echoed my welding comment, maybe just some affirmation, and curved handles, meh.
jmo,
.
Edited to add: jmo= just my opinion, nothing more.
Agree. Ace and Kobalt are, or almost are, contractor grade, like Jackson. Nobody’s yet mentioned that 2-wheelers will rock from side to side on any soft surface like grass, in a most annoying way! Also, a real wheelbarrow can go up a plank ramp and is eminently maneuverable. You just need to grab those handles and set your mind to it. Wheelbarrows are used on construction sites to bring tools and stuff to where you’re working and back, also.I personally don't like two wheel carts because they're a little more awkward to maneuver. However, for people who struggle to balance a one wheel, by all means two wheel is a good option.
I really don't like plastic tubs because they crack and break so easily, especially if you live in a cooler climate and use it when it is cold outside. They don't seem to last as long either (because they break easily and plastic deteriorates faster than most painted steel tubs). I'll use a plastic tub for hauling mulch around the house, that's about it. Everything else steel tub is better in my opinion.
Honestly one of the best bang for your buck wheel barrows I've used are the Ace Hardware steel contractor wheelbarrows 6 cu ft capacity. I've used six of them in the last four years and every one was solid. The aren't cheap but they aren't the most expensive. They can take a pretty good beating.
https://www.acehardware.com/departm...ls/wheelbarrows-carts-and-hand-trucks/7331705
Kobalt equivalent isn't a terrible second choice for me.
I use some really old scooter tires (I think Pirellis, so probably from a Vespa) on mine, I maybe pump them once per year or once every two years. The wheelbarrow-specific tyres are made much worse.Solid (not pneumatic) tires: only way to go.

I like not having to lift with my gorilla cart, but that big tub makes it really easy to put too much weight in it. If the tires aren't pumped up well, that makes it even harder. I wish they were flat freeI had one of these Scott's yard carts for many years:
![]()
It hauled at least a hundred cubic yards of much, many small boulders (? - big 'ol rocks), and all kinds of stuff over the years. The metal arms rusted where they bolted to the tub. I wish I'd thought to check up on them - very handy and easy.
Unfortunately they're discontinued and I didn't find anything I liked that wasn't huge money. I replaced it recently with the Gorilla 7cy four-wheel dump carts, which seems OK but not quite as dead-simple/easy as the old Scotts. A version of that with a 25% bigger tub would have been great.
I also have a gorilla cart and have a love hate with it. It is definitely harder to pull around loaded compared to pushing a wheel barrow but the stability is nice. I tend to use it more for the lighter loads like mulch, weeds, grass, etc. If I am moving heavier stuff the wheel barrow is much better. Gotta keep the wheels pumped up for sure!I like not having to lift with my gorilla cart, but that big tub makes it really easy to put too much weight in it. If the tires aren't pumped up well, that makes it even harder. I wish they were flat free
I really like it for large volumes of brush and branches. I made a little stake body for mine that let's me really stack it highI also have a gorilla cart and have a love hate with it. It is definitely harder to pull around loaded compared to pushing a wheel barrow but the stability is nice. I tend to use it more for the lighter loads like mulch, weeds, grass, etc. If I am moving heavier stuff the wheel barrow is much better. Gotta keep the wheels pumped up for sure!
I need to do that! We mostly just use it for brush and weeds now and that would really up the amount we could get in.I really like it for large volumes of brush and branches. I made a little stake body for mine that let's me really stack it high
I was able to do the whole thing using I think two 6' cedar fence pickets. One for each side and one for the end with the handleI need to do that! We mostly just use it for brush and weeds now and that would really up the amount we could get in.
Ooh, fancy