Which air hammer bits do you find most useful?

[Jawn]

I've been thinking I might order some air hammer bits for the upcoming "Epstein's day". Which ones do you find most useful?

http://store.harryepstein.com/c/AirHammerAttachments.html

 

[Coach James]

So far, the hammer bit is the one I have used the most.

Coach

 

[kingnba6]

ive used the taper punch and the hammer attachment.

 

[firebox40dash5]

I have a dull point for unit bearings and such, a sharpened point, a flat chisel, a vee and a claw cutter, and a 1" hammer. Long versions of most are helpful too, but it doesn't look like they have much of those.

 

[plinker]

long & short hammer tip bits, tapered & straight punch, couple of chisel's 6" & 11" (usually 3/4"),

Specially ground (rounded off) chisel for tapping hydraulic hose fitting's loose.

 

[Jawn]

What do you find the hammer face one useful for?

I only have a few cheap ones right now... a point I rounded off for a specific task, a chisel that hasn't held up well, a notched chisel that's no better, and a sheet metal cutter that I haven't tried to use. (they came with a cheap air hammer).

 

[greasemonkey44]

I mostly use a good chisel, good taper and a good round bit
Buy Ajax or old forge/Mathew bits, they cut better and last way longer
I have a bunch of other bits but those 3 usually do the job

 

[joejeep92]

Hammer bit, small and large chisel, claw cutter, taper,