ljhhontx
Well-known member
Another vote for the Cree/ I order them from China (sorry) for less than $6 each, use 1 AA battery and will blind anything within 100 ft.
Same here - have one in each glovebox for just in case and one in the belt pouch at work - used almost daily for 6+ months and only on the 2nd battery.Another vote for the Cree/ I order them from China (sorry) for less than $6 each, use 1 AA battery and will blind anything within 100 ft.
I have trouble with the color of LED light. I'm looking for a flashlight with better color rendering. Any ideas?
I have trouble with the color of LED light. I'm looking for a flashlight with better color rendering. Any ideas?
I have trouble with the color of LED light. I'm looking for a flashlight with better color rendering. Any ideas?
I'm cheap so when I need more light than the i3s, I use a $7 SK68 clone with 5 modes running off a 14500 Lion..
Another vote for the Cree/ I order them from China (sorry) for less than $6 each, use 1 AA battery and will blind anything within 100 ft.
Alkaline AAs ****.
If you've spent Real Money on a flashlight that you actually like, the possibility of the alkaline leaking alone is enough to go to some sort of rechargeable solution. Neither NiMH nor Li-Ion are nearly as prone to leaking as alkalines.
Personally I prefer NiMH for general use, Eneloops are great. Fewer safety concerns for a non-savvy user than Li-Ion although lower performance. I'm using Eneloops in just about everything around the house; remote controls, general use flashlights, all my tools/meters/etc. The Li-Ions are for my own lights that I EDC and/or use for specific tasks and tend not to lend out.
The new Duracell Ion Core cells that are appearing in the grocery store are apparently relabeled Eneloop ** (AA format) or standard Eneloop (AAA format) and especially in AA format are a really good deal. Unfortunately I'm not aware of a good charger that is readily available in brick and mortar stores in the USA. Nitecore i4 v2 is a good budget charger however that will do both NiMH and Li-Ion although it doesn't have the **** features of the Maha C9000 (which is NiMH only.)
I've seen rumors over on CPF about a new charger coming out from SkyRC that has all the features of the C9000 and then some and will handle both NiMH and Li-Ion. Unfortunately it's not released yet, nor has anyone confirmed if it will run LiFePO4. (if it did, it would truly be One Charger to Rule Them All...)
http://www.candlepowerforums.com/vb...kyRC-%97-IFA-2014-%97-MC3000-charger-analyzer
I have about 10 of these that I get for free at HF. I give loved ones 2 -- one for their cars and one for their purses.
![]()
X2. I have two neutral zebralights and they are awesome. Both are still cree XML emitters just with 4400cct. Good enough for me. There are higher CRI lights but at a big loss of output.You might want to look at Zebralight. They offer Neutral White vs Cool White and they also have floodies which I really like. They're not cheap though.
http://www.zebralight.com/
X2. People get pretty crazy over there just like they do here over tools.candlepowerforums.com but be careful if you get hooked like i did lots of money to be spent there lol
V11R does get fairly large with the extender on it. I prefer using cr123s. Cheap simple and long life although the output with a 16340 is impressive (500 lumens versus 210) it's short lived.Not sure about your last question, but to answer the previous, I'd look at 4Sevens for an AA format light that can take a 14500; also Sunwayman V11R will take 14500 with the optional extension tube but as it is really a CR123A format light it is larger in diameter than a strictly AA light.
Note: I don't actually own any 4Sevens lights so I can't give you a firsthand opinion, although they seem to be well regarded.
V11R does get fairly large with the extender on it. I prefer using cr123s. Cheap simple and long life although the output with a 16340 is impressive (500 lumens versus 210) it's short lived.
Some have machined them out to fit 18500s.
![]()
Yes.
Go get some of those <$5 Sipik sk68s and/or clones. They are a great lil light for a number of reasons...even when using AA batteries.
So what's a good single AA or AAA light that can take LI-Ion cells? I'm in the market for exactly that a SINGLE AA or AAA keychain light.
Thanks
PS is there a rechargable AAAA yet? I love the slim pocket lights from Streamlights and Pelican, but hate the price of batteries
Maglite is the Craftsman of flashlights.
It's the default name brand that the mass market recognizes, and they aren't awful, but the knowledgeable consumer can do much much better.
A foursevens mini AA has been my EDC for over four years now and has been used and abused and over-volted (designed for 1.5v AA, I use 3.7v Li-Ion 14500) and the light is so reliable I would bet my life on it. I would not hesitate to recommend a foursevens product, if you want a pocket style pen light, the 2xAAA Preon is an excellent choice.


I've got a couple of those SK68 clones from Amazon (one 3 mode and one 1 mode IIRC). I'll have to try putting one of the Eneloops in there and see how it lasts. Do they make those clones in 2 mode? I need 2 modes but I hate the disco in the 3 mode.The Sipik SK68 clones at $6 (I pay more to get high/med, which is essential if using Lion 14500 instead of AA) is actually cheaper than free HF lights. HF lights come with junk 3xAAA batteries, replacing them with 3x AAA Eneloops is more expensive than buying the SK68 which only needs 1xAA Eneloop and has better output.
So what's a good single AA or AAA light that can take LI-Ion cells? I'm in the market for exactly that a SINGLE AA or AAA keychain light.
Thanks
PS is there a rechargable AAAA yet? I love the slim pocket lights from Streamlights and Pelican, but hate the price of batteries
If you need AAAA batteries at a good price just take apart a DuraCell 9V, there are six of them inside.
Energizers work too for this. Avoid a lot of the cheap zinc-carbon batteries (eveready etc), though, they used flat stacked cells rather than the AAAA.
Also keep in mind that many times these AAAAs inside the 9Vs have the "******" on the negative side vs the positive side. You may need to solder a ****** on the positive side. Always check the polarity of the AAAA with a DMM to be sure.