Wiha 92190 50 Piece Master Technicians Bench Top Tool Set $160@kctool.

[upgrading]

https://www.kctoolco.com/tool-of-the-day/
12/5/16 only
$10 higher than their March 2016 DOTD price.
Try code thanks2gj and see if that works for 10% off.

 

[Super Sport]

Nice set of screwdrivers for a good price. I have the same set in the tray, and have been very pleased with them.

It looks like the 10% off code works, and shipping is free. For $144, these are a pretty darn good deal.

 

[cheechi]

in the 92190 here, there is a 3.5mm nut driver not in the 191

in the 92191 that comes in the tray there are 4 mm hex driver not in the 190

Other than the tray and stand they are identical, save for the above.

Not really sure where the difference 51 vs 50 pcs comes in. Hope this helps though. If you don't care about the above tools we're talking about a $55 tray being the difference between the two, today.

 

[Can I try?]

in the 92190 here, there is a 3.5mm nut driver not in the 191

in the 92191 that comes in the tray there are 4 mm hex driver not in the 190

Other than the tray and stand they are identical, save for the above.

Not really sure where the difference 51 vs 50 pcs comes in. Hope this helps though. If you don't care about the above tools we're talking about a $55 tray being the difference between the two, today.

IIRC, the set with the tray includes a chip lifter that is not included in the set with the stand.

 

[danny_barkley]

IIRC, the set with the tray includes a chip lifter that is not included in the set with the stand.

Hmmm, I bought the set with the stand a long time ago, not sure how long, maybe 10 years.

It had a chip lifter in it.

The stand for mine had a clear plexiglass stand.

 

[pgray007]

Nice deal, thanks! I have several crappy sets of tiny drivers and am finally buying the right set!


Sent from my iPhone using Tapatalk

 

[bennymic]

Hmmm, I bought the set with the stand a long time ago, not sure how long, maybe 10 years.

It had a chip lifter in it.

The stand for mine had a clear plexiglass stand.

I bought mine in the last year. Had a chip lifter. Also the stand was stamped metal. Actually if you read the description a chip lifter is listed as included.

https://docs.google.com/spreadsheets/d/15ZUgqyR8PmmSMNyH-8i4Shk4exXvma6gYUqP_pR6nc0/edit?usp=sharing

Interestingly in addition to the differences noted above they also each claim to have 53 drivers, not including the chip lifter.

 

[cheechi]

I spent a few mins looking at both at KC site because I had a few minutes, and figured it might help others out. Because I had (at the regular price) decided on the tray version prior. I think there was a thread about these two a few months back where someone put them on 'sale' all the way down to matching regular price on Amazon & KC.

Yes both say they have the chip lifter too. I have one lying around somewhere anyway, very old but at the time it was new it was ESD safe too.

 

[LXCam]

Ok guys, I searched but couldn't find what the "chip lifter" is. Now I gotta know, thanks

 

[danny_barkley]

Ok guys, I searched but couldn't find what the "chip lifter" is. Now I gotta know, thanks

It is very handy to get under Semi Conductor chips and prise them from their sockets.

 

[LXCam]

It is very handy to get under Semi Conductor chips and prise them from their sockets.

Lol. Thanks. My brain was stuck on machining swarf. And I wa thinking why in the hell would something like this be in a miniature driver set. Duhhh

 

[zeekh]

Lol. Thanks. My brain was stuck on machining swarf. And I wa thinking why in the hell would something like this be in a miniature driver set. Duhhh

I have no trouble lifting, chips, potato, corn, tortilla no problems

 

[roemaster]

This goes incredibly well with it.
https://www.kctoolco.com/kc-tool-al...-for-precision-tools-50-holes-tumbled-finish/