ckadams00
Well-known member
- Location
- Chicago IL
- Price
- $1
Tool Cleanout for Xmas Funds
Cleaning out all of my extras in no particular order to get some Christmas cash for presents.
Very open to offers or trades if you see anything you want. Most items will ship USPS priority mail unless I can do it cheaper (prices do NOT include shipping). Everyone on this site has been great to me over the years so I’ll ship ONE socket if you need it, but it would make it easier if orders were bundled at $20 or more. I have always thrown in freebies in the past . . .sure I will do it again.
Bundle Bundle for God's Sake Bundle!! LOL
1. Helek (Germany) 6 inch caliper very good shape and tight. Not sure the age, guessing 50’s. Has OM on the back. Case is included but most of the stitching has worn away. $15
2. USA Vice Grip Pliers- Petersen Mfg. Co 5WR haven’t cleaned these up. Jaws have some wear. $8
3. Feeler Gauges: Wizard H3185 $5 Blue Point FB325A $6
4. Craftsman Wrenches – All USA made, all good condition – Top to Bottom:
11/16 –V- 44698 12 pt $3
1/2 -VΛ- 44695 12 pt $3
7/16 -VΛ- 44694 12 pt $3
9-11mm –V- 44175 Flare Nut New $4
3/4 –V- 44701 12 pt $3
3/8 -VΛ- 44383 6 pt $1
5/8 -VΛ- 44697 12 pt $3
17-19 mm –VV- 44508 $3
5. More wrenches:
Bridgeport 11/16 – 3/4 1193054 12 pt good shape $4
Blackhawk/Armstrong Hexite 13/16 – 11/16 4730-A $3
CMan Undeline Logo Vanadium 9/16 $3
Cman Underline Logo N4 11/16 – 19/32 $3
6. Ratchets
Penens 1/2 drive 1661 some chrome loss on head, beefy! $12
Cornwell TR301 1/4 surface rust but very good shape $15
Proto 5249 3/8 drive screws are not correct, OM $5
CMan USA VH 44811 3/8 drive good shape $6
CMan (CHINA) 44811 3/8 New $6
7. Snap On 7.5” Side Cuts 87BCP very good condition no chips in the cutters $20
8. Snap On stubby SDP22 #2 needs cleaning $10
9. More wrenches
Proto pro 15mm 12 pt 1215m $5
Proto pro 5/8 12pt 1220 $5
Proto Pro 13mm 12 pt 1213m $5
Proto 1/2 - 7/16 30258 OM $1
Proto Pro 17mm 1217m 12pt $5
Penens Chicago 11/16 12pt N89 $3
Penens Chicago 9/16 – 1/2 O37 $3
10. Random
Channellock 10” pliers free if you want them with $25 purchase. A little beat up, needs cleaning.
Husky nut driver 1/2 $3
Cman Circle V 11/32 $5
11. Wrench Lot $12
Gedore 11/32 5/16
Snap On VS1214 3/8 7/17 some chrome loss
Tomahawk 11/16 19/32
Vlchek USA OM 9/16 5/8
Williams 25/32 11/16 Superwrench 3029
Dunlap USA 5/16 13/32
Barcalo USA 3/4 5/8
Kraeuter USA 1/2 7/16
12. Even more wrenches
SK C20 5/8 12 pt $3
Cornwell 5/8 9/16 $5
Plomb 9/16 ½ 1126 $5
13. New unused 4 pc set #33491 from WIHA retail $51.98. I received these as a gift but have Weras which I prefer in all the same sizes. I believe the 4pc set is discontinued and these are now sold individually or in 5 or 6pc sets. I'd like $30 but am open to offers or trades.
4x150, 5x150, 6x150, 8x150
WIHA 334N THandle Insulated Hex
• Meets ASTM, IEC, EN, VDE, NFPA Insulation Standards
• All Tools Individually tested for insulation integrity
• Handle & Insulation Molded On For Maximum Protection
• Blades of Wiha Special CRM-72 Tool Steel
• Available in Hex Inch & Metric & Nut Drivers
• Through Hardened Durability - Avg 58-60 HRC
• Ergonomic Comfort Grip T-Handle, Maximum Power
• Guaranteed Quality - Made In Germany
Cleaning out all of my extras in no particular order to get some Christmas cash for presents.
Very open to offers or trades if you see anything you want. Most items will ship USPS priority mail unless I can do it cheaper (prices do NOT include shipping). Everyone on this site has been great to me over the years so I’ll ship ONE socket if you need it, but it would make it easier if orders were bundled at $20 or more. I have always thrown in freebies in the past . . .sure I will do it again. Bundle Bundle for God's Sake Bundle!! LOL
1. Helek (Germany) 6 inch caliper very good shape and tight. Not sure the age, guessing 50’s. Has OM on the back. Case is included but most of the stitching has worn away. $15
2. USA Vice Grip Pliers- Petersen Mfg. Co 5WR haven’t cleaned these up. Jaws have some wear. $8
3. Feeler Gauges: Wizard H3185 $5 Blue Point FB325A $6
4. Craftsman Wrenches – All USA made, all good condition – Top to Bottom:
11/16 –V- 44698 12 pt $3
1/2 -VΛ- 44695 12 pt $3
7/16 -VΛ- 44694 12 pt $3
9-11mm –V- 44175 Flare Nut New $4
3/4 –V- 44701 12 pt $3
3/8 -VΛ- 44383 6 pt $1
5/8 -VΛ- 44697 12 pt $3
17-19 mm –VV- 44508 $3
5. More wrenches:
Bridgeport 11/16 – 3/4 1193054 12 pt good shape $4
Blackhawk/Armstrong Hexite 13/16 – 11/16 4730-A $3
CMan Undeline Logo Vanadium 9/16 $3
Cman Underline Logo N4 11/16 – 19/32 $3
6. Ratchets
Penens 1/2 drive 1661 some chrome loss on head, beefy! $12
Cornwell TR301 1/4 surface rust but very good shape $15
Proto 5249 3/8 drive screws are not correct, OM $5
CMan USA VH 44811 3/8 drive good shape $6
CMan (CHINA) 44811 3/8 New $6
7. Snap On 7.5” Side Cuts 87BCP very good condition no chips in the cutters $20
8. Snap On stubby SDP22 #2 needs cleaning $10
9. More wrenches
Proto pro 15mm 12 pt 1215m $5
Proto pro 5/8 12pt 1220 $5
Proto Pro 13mm 12 pt 1213m $5
Proto 1/2 - 7/16 30258 OM $1
Proto Pro 17mm 1217m 12pt $5
Penens Chicago 11/16 12pt N89 $3
Penens Chicago 9/16 – 1/2 O37 $3
10. Random
Channellock 10” pliers free if you want them with $25 purchase. A little beat up, needs cleaning.
Husky nut driver 1/2 $3
Cman Circle V 11/32 $5
11. Wrench Lot $12
Gedore 11/32 5/16
Snap On VS1214 3/8 7/17 some chrome loss
Tomahawk 11/16 19/32
Vlchek USA OM 9/16 5/8
Williams 25/32 11/16 Superwrench 3029
Dunlap USA 5/16 13/32
Barcalo USA 3/4 5/8
Kraeuter USA 1/2 7/16
12. Even more wrenches
SK C20 5/8 12 pt $3
Cornwell 5/8 9/16 $5
Plomb 9/16 ½ 1126 $5
13. New unused 4 pc set #33491 from WIHA retail $51.98. I received these as a gift but have Weras which I prefer in all the same sizes. I believe the 4pc set is discontinued and these are now sold individually or in 5 or 6pc sets. I'd like $30 but am open to offers or trades.
4x150, 5x150, 6x150, 8x150
WIHA 334N THandle Insulated Hex
• Meets ASTM, IEC, EN, VDE, NFPA Insulation Standards
• All Tools Individually tested for insulation integrity
• Handle & Insulation Molded On For Maximum Protection
• Blades of Wiha Special CRM-72 Tool Steel
• Available in Hex Inch & Metric & Nut Drivers
• Through Hardened Durability - Avg 58-60 HRC
• Ergonomic Comfort Grip T-Handle, Maximum Power
• Guaranteed Quality - Made In Germany
Last edited: