To avoid these ads, REGISTER NOW!

Winter supplies

Lkdelta

Well-known member
Joined
Sep 21, 2010
Messages
1,131
Location
40 mi.east of syracuse
I need to find some durable, maybe insulated rubber boots and some durable winter/cold weather work gloves.
Looking around over on Amazon, LaCrosse seems to have a durability problem now.
And I cant find any cloth gloves that dont rip near the base of the thumb.
I don't need the rubber dipped style

Anybody got something they have been using.... that holds up?
 
Last edited:
To avoid these ads, REGISTER NOW!

justanengineer

Well-known member
Joined
Apr 5, 2011
Messages
7,722
Location
Motor City
Skip the yuppie stores and sites, find a local military surplus shop where you can feel the quality first hand. I still use my old Army winter gloves, theyre like a heavy leather covered ski glove. Regarding boots its the same. My old ICW's are good down to 0F. Below that Ive got bunny boots.
 

crewchief888

Well-known member
Joined
Dec 3, 2009
Messages
13,736
Location
NW indiana
i'm a filed emchanic at a const eq dealer,
for winter work boots i buy insulated & waterproof hunting boots.

i've never found a decent pair of winter "work" gloves.

i typically wear a pair of nitrile gloves, and either a pair of brown jersey, or mechanics type gloves over them.

i keep 2 or 3 pair warming/drying on the dash of the truck, as my hands start to get cold or gloves get wet, i swap them out.

there are those days that nothing you do or wear that will keep you warm/dry.


:beer:
 

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
50,862
Location
Northern Central Ohio
Gloves, I would try to find something with two layers or make your own. Find a knit pair of gloves and a leather pair that will fit over them.

Boots, like mentioned, probably best off to find a set of insulated hunting boots, maybe you can find a close out/ clearance pair.
 

jimindm

Well-known member
Joined
Oct 29, 2011
Messages
2,395
Location
Des Moines, Iowa
I bought a set of welding gloves that had a plastic liner. I have used them a lot in the winter and my hands never get wet. They are not a basic welding glove. These do not have the large cuff or anything like that. They look just like a basic set of lined leather gloves, only just a tad thicker.
 

boomer12831

Well-known member
Joined
Jan 6, 2013
Messages
526
Location
northern New York
I just bought a pair of Cofra boots. My co-workers have them and swear by them. Waterproof, composite safety toe. We all work outside and so far have not had winter hit yet. I am not far from you so we have the same climate. The right of ways that we work in are always wet, so I think these will be warm and dry, Ed.
 

Krodad

Well-known member
Joined
Mar 25, 2006
Messages
304
Location
Iowa
too many gloves to give an opinion, but for boots I give a plus one on the mucks... but if you want a great bang for the buck in boots, these Kamiks are something I have had for years and years, both insulated versions and uninsulated. For some reason, they are the warmest boots I own, even compared to my $200 Danners, etc. For around 50-60 bucks, you can't go wrong with these


http://www.gearcor.com/brands/kamik
 

Attachments

  • boot.jpg
    boot.jpg
    4.4 KB · Views: 12

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,076
Location
SE MI
For boots, look for "sorel boots men" on Amazon. Also sold in some sporting goods stores. "Pak" style boot with a removable liner tend to be warmer. Also the liner dries quicker when it is removed. These may not be the best if you walk a lot.

I have always had good luck with Wells Lamont gloves. Get ones with Thinsulate insulation.

The best solution for extremely cold weather, is a thinner pair of gloves and a pair of heavy leather mitten.
 
OP
L

Lkdelta

Well-known member
Joined
Sep 21, 2010
Messages
1,131
Location
40 mi.east of syracuse
I bought a set of welding gloves that had a plastic liner. I have used them a lot in the winter and my hands never get wet. They are not a basic welding glove. These do not have the large cuff or anything like that. They look just like a basic set of lined leather gloves, only just a tad thicker.

Any chance you might have a pic.... or a link?

Thanks to all!!!!!!!!!!!!!
 

berglar

New member
Joined
Dec 16, 2012
Messages
3
Location
SE Michigan
I like Xtra Tuff boots with the felt insole. They have lasted longer than any other rubber boot I've owned. I've heard good things about the insulated ones, but never used them. Sorels were warm and good in snow but not waterproof enough for immersion even when treated with Sno-seal. I haven't been able to find good ones for a few years now.
 
To avoid these ads, REGISTER NOW!

Snowbound

Well-known member
Joined
Apr 24, 2008
Messages
64
Location
Kelowna, BC
Google Dunlop Purofort boots. All the Oil Patch guys up north wear them and the are good to -40.

Not cheap.
 
OP
L

Lkdelta

Well-known member
Joined
Sep 21, 2010
Messages
1,131
Location
40 mi.east of syracuse
too many gloves to give an opinion, but for boots I give a plus one on the mucks... but if you want a great bang for the buck in boots, these Kamiks are something I have had for years and years, both insulated versions and uninsulated. For some reason, they are the warmest boots I own, even compared to my $200 Danners, etc. For around 50-60 bucks, you can't go wrong with these


http://www.gearcor.com/brands/kamik

These work. Thanks!
 

Hghgrad

Well-known member
Joined
Nov 26, 2012
Messages
539
Location
Detroit MI
We use kinco work gloves in the winter. They seem to last a really long time, and you can get them waterproof also.
 

nicksnothereman

Well-known member
Joined
Oct 19, 2013
Messages
3,608
Location
In the Mojave
I need to find some durable, maybe insulated rubber boots and some durable winter/cold weather work gloves.
Looking around over on Amazon, LaCrosse seems to have a durability problem now.
And I cant find any cloth gloves that dont rip near the base of the thumb.
I don't need the rubber dipped style

Anybody got something they have been using.... that holds up?

For actual winter "boots" (as in in the snow)? Army mickeys.:lol: My feet don't get that cold. As far as manufacturers you should look at red wing (from what other people say), bates, and frye (from what I say). Maybe get a pair of "hunting boots" that are lined for the cold. Or you could just get winter socks but those are almost always itchy. The bates tora bora boots are awesome but incredibly expensive. Doesn't make much sense to buy them for your situation though.

Can't help you with the cold gloves as far as "durable". You could wear a pair of cheap jersey gloves under a better pair of leather gloves and just swap out the liners when necessary. Personally, I use wool lined (I believe that's what they are) gloves from the dollar store. Warmest gloves I've ever owned were rabbit fur lined, not work gloves and probably not available anymore.
 

Krodad

Well-known member
Joined
Mar 25, 2006
Messages
304
Location
Iowa
Guess I'll chime in on gloves a bit...

When I really need to keep the digits warm I wear the "musher" style gloves. You can get them with leather palms/fingers too. I like the extension going past my wrist and over the coat sleeve so I don't get drafts either up my arm, on my wrist, or in the glove. They seem to keep my the warmest overall. I don't ride smowmobiles, but I think they use this type a lot when riding, too.
 

Attachments

  • gloves.jpg
    gloves.jpg
    14.7 KB · Views: 5

innealtoir

Banned
Joined
Aug 24, 2013
Messages
89
Location
New England
I haven't bought a pair in a fair amount of time, but I had been buying Servus by Honeywell milkers steel toe boots and wear good wool socks. I have not had any issues with them and the price was really good for an American boot. I looked on their website and they aren't listed anymore, so I can't comment about their other lines of boots.

You can never go wrong with a set of Red Wings! :) haha.

I agree with the sentiments on layering up as much as possible as opposed to buying super insulated stuff. Gloves, boots, etc. I would rather be able to shed some layers then be saddled up with crazy insulation that limits dexterity or causes me to be overheated if conditions change.
 

akdiesel

Well-known member
Joined
Aug 8, 2008
Messages
2,617
Location
Wasilla, AK
I've got an older pair of Refrigiwear gloves. Best gloves I've found for -40f when just standing around.
 

jkwilson

Well-known member
Joined
Dec 5, 2012
Messages
758
Location
SW Indiana
I need to find some durable, maybe insulated rubber boots

"Durable" and "rubber boots" don't much go together anymore. I can remember when I could buy fairly inexpensive rubber boots and wear them until the tread was gone from the bottom. Now I'm lucky to get a year out of a $100 pair before they leak.

Be more specific about what you want the boots for. If you are going to be doing a lot of sitting, you need a different boot than someone who is walking or standing. Chemical exposure, amount of use, abrasion etc. also make a big difference.
 
OP
L

Lkdelta

Well-known member
Joined
Sep 21, 2010
Messages
1,131
Location
40 mi.east of syracuse
Guess I'll chime in on gloves a bit...

When I really need to keep the digits warm I wear the "musher" style gloves. You can get them with leather palms/fingers too. I like the extension going past my wrist and over the coat sleeve so I don't get drafts either up my arm, on my wrist, or in the glove. They seem to keep my the warmest overall. I don't ride smowmobiles, but I think they use this type a lot when riding, too.

any idea where to get these?
 

Attachments

  • gloves.jpg
    gloves.jpg
    5.2 KB · Views: 38
To avoid these ads, REGISTER NOW!
Top Bottom