To avoid these ads, REGISTER NOW!

Wire rope ferrule crimp specification

W

whateg01

Well-known member
Joined
Mar 13, 2006
Messages
11,398
Location
doo dah, kansas, usa
Not a critical application, but I don't want to use clamps because they are ugly and stuff gets caught on them. Also, for this one project, I don't really want to spend real money to buy a crimper. I've looked around and came seen to locate a specification for the diameter of a properly crimped ferrule on 1/8" wire rope. Surely one exists, right? Does somebody have a link?

ETA: happens every time... Swage was the right word. Haven't found what I'm looking for yet, but I think I'm on the right track now.
 
To avoid these ads, REGISTER NOW!
OP
W

whateg01

Well-known member
Joined
Mar 13, 2006
Messages
11,398
Location
doo dah, kansas, usa
I was going to use a hydraulic press. Also easy on the hands but far less portable than the small hydraulic crimpers. I was looking at the harbor freight crimper but it lists wire sizes, not wire rope. I'm not sure what the correlation is to a wire rope ferrule and a an electrical lug
 
To avoid these ads, REGISTER NOW!
B

Beerhippie

Well-known member
Joined
Oct 13, 2023
Messages
9,930
Location
Far NE Oregon
whateg01 said:
I was going to use a hydraulic press. Also easy on the hands but far less portable than the small hydraulic crimpers. I was looking at the harbor freight crimper but it lists wire sizes, not wire rope. I'm not sure what the correlation is to a wire rope ferrule and a an electrical lug
Click to expand...
You just need the proper dies for the size, type and material of your wire crimps.

Or just borrow the right tool. Local fencing company here will loan you the tool if you buy the crimps from them.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom