Just wanted to give a 5 star review for Wolverine Floor Coating system which i purchased from Bert at Alpha Garage. Not only is the product exceptional and looks awesome but the customer service that Bert offered is unsurpassed. Everytime I called with a question, he would answer and most of my calls were over the weekend.
I purchased the full flake 3 layer system with the traction additive as well. I opted not to do the acid etch since my floor was heavily pitted with spars and cracks and the floor is about 45 years old and never been coated. I went ahead and ground the floor down with a specail angle grinder with a carbide wheel and a vac attachment. I would highly recommend this method as it will eliminate any small spars in the concrete and it will be a more uniform and clean finish once it has been ground. I also had large cracks that need to be filled and once I sent pics to Bert, he recommended to use a couple gallons of the Trowel Ease.
I purchased the full flake 3 layer system with the traction additive as well. I opted not to do the acid etch since my floor was heavily pitted with spars and cracks and the floor is about 45 years old and never been coated. I went ahead and ground the floor down with a specail angle grinder with a carbide wheel and a vac attachment. I would highly recommend this method as it will eliminate any small spars in the concrete and it will be a more uniform and clean finish once it has been ground. I also had large cracks that need to be filled and once I sent pics to Bert, he recommended to use a couple gallons of the Trowel Ease.
