To avoid these ads, REGISTER NOW!

Workbench/Workstation Advice.

Kamanhart

Well-known member
Joined
Jul 9, 2014
Messages
138
Location
Wausau Wisconsin
Hello guys,

I'm getting ready to move into a new place that has a nice 21'x21' garage with a layout like below in picture 1. it does not current have a bench and i dont have one that is worth moving into the place. SO im looking for feedback one what you guys would feel to be the better route.

Option 1-Picture 2: Build an 8' bench and have my top and bottom HF 44 box sit to the side of the bench. I would also build it tall enough I could add a second 44 underneath one side of it down the road. Also with this option I have a 4'x8' piece of i could use as a top to the bench.

Option 2-Picture 3: Build an 11.5' bench that spans the whole length and ditch my top box I currently have for another 44 bottom and build them into the bench. If I went this route i would more than likely go with either a butcher block or some sort of hard wood top with possibly a section of it in stainless.

I'm not dead set on either of these if someone has a better idea I would love to hear them. Or if you have any suggestions on how to make either of these ideas better i am also all ears. Thanks in advance!!



 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom