To avoid these ads, REGISTER NOW!

Worthington air compressor

amiller120

Active member
Joined
Oct 10, 2023
Messages
40
IMG_3793.jpeg

IMG_3794.jpeg

Dude is selling this by me for $100

It works. Tank has pinhole leaks but compressor is fine.

It doesn’t say a model # but it has a serial.
From some googling it might be an ED.

Are these decent two stage units?

I have an extra tank so I’m not too concerned about this tank. May make it into a smoker or something.

It appears to have reed valves,
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!

micromind

Well-known member
Joined
Sep 24, 2023
Messages
3,033
Location
Fernley, Nevada, about 30 miles east of Reno.
There's no way I'd pressurize any tank with even the smallest pinhole leak.

The pump is very likely ok. After replacing the tank, I would get a new high pressure relief valve. The old one might work fine but if it's frozen closed and the pressure switch fails, you'll have a fair size bomb.
 
Last edited:

Speed-Racer

Well-known member
Joined
Aug 25, 2008
Messages
731
Nice looking Compressor pump. I would check and see what parts are available before picking up. If you have some pieces such as a tank and motor, it could be a nice project.
The video below is from a running model with newer paint.
 
OP
A

amiller120

Active member
Joined
Oct 10, 2023
Messages
40
Nice looking Compressor pump. I would check and see what parts are available before picking up. If you have some pieces such as a tank and motor, it could be a nice project.
The video below is from a running model with newer paint.
sweet. Thanks
 
To avoid these ads, REGISTER NOW!
Top Bottom