UncleSalty
New member
- Joined
- Sep 6, 2009
- Messages
- 1
I love the look of my new racedeck floor. My home is over a sinkhole and the slab is cracking bad. The insurance co paid to have 400 cu ft of concrete pumped under the slab to stabilize it. I was afraid of some more cracking as the house settles so epoxy was out. I decided on racedeck. My garage is 20x29 the install took 8 hours. I had a crew comming on sunday, my tiles came tuesday and I had wednesday off so I went for it.
The install took me a little longer than the video showed. My lessons learned..
1. wear gloves, the tiles are sharp on the back side, by the end of the day your fingers will be sore.
2. Stomping the tiles in worked for a few rows, and got tiring. If you dont have help get a large rubber mallet.
3. Watch out for tabs that get caught on the top of the tile instead of down into the loops. They will lay flat on top of the adjacent tile and leave a stress mark on the tile.
4 move everything out of the garage! I tried to leave 2 large rolling boxes, an air compressor and a workbench in and just tile half the garage and then move them to the finished half. The floor needs to float to maintain square. I was finding that as I tiled toward the back the tiles were getting too tight to fit. I moved it all out and the problem went away.
Other than that it was an easy install, I found myself checking the floor a few times last night Wow!
Ill post some pics tonight
The install took me a little longer than the video showed. My lessons learned..
1. wear gloves, the tiles are sharp on the back side, by the end of the day your fingers will be sore.
2. Stomping the tiles in worked for a few rows, and got tiring. If you dont have help get a large rubber mallet.
3. Watch out for tabs that get caught on the top of the tile instead of down into the loops. They will lay flat on top of the adjacent tile and leave a stress mark on the tile.
4 move everything out of the garage! I tried to leave 2 large rolling boxes, an air compressor and a workbench in and just tile half the garage and then move them to the finished half. The floor needs to float to maintain square. I was finding that as I tiled toward the back the tiles were getting too tight to fit. I moved it all out and the problem went away.
Other than that it was an easy install, I found myself checking the floor a few times last night Wow!
Ill post some pics tonight
