hi everyone. i am new here so ill start with the cheaper stuff until my credit goes up and people are familiar with me. i know what it's like to be screwed on the internet, that's for sure!
also if you are in NJ you are welcome to stop by and pick them up. and hey if you have the time, stay for a little and we'll have a beer!
the wrenches are all in usable shape and would be great if you need a quality one-off for specific job (like for me, my mill and lathe have their own set of 3 or so tools wired right next to them. this way i dont have to go to my big main tool box)
anyway here's the stuff
##image 34##
Lectrolite 1/2 both sides $2
Lectrolite 1/2 and 9/16 box $3
Lectrolite 5/8 and 11/16 box $3
Lectrolite 13/16 box. has been cut for a custom purpose $1
Lectrolite 15/16 box. has been cut for a custom purpose $1
##image38##
(unknown) 15/16 box. has been cut for special purpose $1
(unknown) 5/8 and 11/16 box. $4
(unknown) not marked. will check size but is larger than 1" $4
(unknown) 1" open $3
(unknown) 7/8 and 13/16 box $2
(unknown) 3/4 open. has been cut for special purpose. $0.50
(unknown) 5/8 and 11/16 open. also has 15mm and 18mm on the back lol $2
(unknown) 5/8 and 3/4 open. has 16mm and 19mm on back. probably same maker as above $2
##image39##
Dunlap 11/16 and 19/32 open $3
(unknown) 7/16 and 3/8 box $2
Great Neck 5/8 both sides $2
Wrenchking 5/8 both sides. note one side has a ratcheting mechinism $2
Craftsman 11/16 and 19/32 open $2
Craftsman 15/16 and 1" open $1
##image41##
Indestro 7/8 and 13/16 box $5
Indestro 7/8 open, 3/4 box $5
Barcalo 7/8 both sides $4
Barcalo 11/16 and 5/8 box. has small chip out of one side but does not effect operation. $3
Barcalo 5/8 both sides $3
shipping for 48 states: $3 first wrench, $1 each additional wrench. i will cut a break if you decide to buy a bunch.
also: i can media blast these with aluminum oxide and oil coat them for an additional $1 per wrench. again, ill cut a break if you buy several wrenches.
PM me if you are interested and thanks for reading!
also if you are in NJ you are welcome to stop by and pick them up. and hey if you have the time, stay for a little and we'll have a beer!
the wrenches are all in usable shape and would be great if you need a quality one-off for specific job (like for me, my mill and lathe have their own set of 3 or so tools wired right next to them. this way i dont have to go to my big main tool box)
anyway here's the stuff
##image 34##
Lectrolite 1/2 both sides $2
Lectrolite 1/2 and 9/16 box $3
Lectrolite 5/8 and 11/16 box $3
Lectrolite 13/16 box. has been cut for a custom purpose $1
Lectrolite 15/16 box. has been cut for a custom purpose $1
##image38##
(unknown) 15/16 box. has been cut for special purpose $1
(unknown) 5/8 and 11/16 box. $4
(unknown) not marked. will check size but is larger than 1" $4
(unknown) 1" open $3
(unknown) 7/8 and 13/16 box $2
(unknown) 3/4 open. has been cut for special purpose. $0.50
(unknown) 5/8 and 11/16 open. also has 15mm and 18mm on the back lol $2
(unknown) 5/8 and 3/4 open. has 16mm and 19mm on back. probably same maker as above $2
##image39##
Dunlap 11/16 and 19/32 open $3
(unknown) 7/16 and 3/8 box $2
Great Neck 5/8 both sides $2
Wrenchking 5/8 both sides. note one side has a ratcheting mechinism $2
Craftsman 11/16 and 19/32 open $2
Craftsman 15/16 and 1" open $1
##image41##
Indestro 7/8 and 13/16 box $5
Indestro 7/8 open, 3/4 box $5
Barcalo 7/8 both sides $4
Barcalo 11/16 and 5/8 box. has small chip out of one side but does not effect operation. $3
Barcalo 5/8 both sides $3
shipping for 48 states: $3 first wrench, $1 each additional wrench. i will cut a break if you decide to buy a bunch.
also: i can media blast these with aluminum oxide and oil coat them for an additional $1 per wrench. again, ill cut a break if you buy several wrenches.
PM me if you are interested and thanks for reading!