WrightGrip combination wrench metric length

[Jeff590]

I'm interested in getting some Wright combination wrenches, in metric to start. When I am looking at the SAE and metric sets, it looks like the metric lengths are shorter - is that right?

Looking at the 950 set (metric), the last wrench is just above the clear window on the roll; on the 911 set (SAE) the last wrench is way above that. I know that the 1" is > 19mm, but the metrics seem small.

I'v read the other thread where someone measured the 5/8" - anyone have the metrics they can measure? Like maybe 12mm and 19mm?

 

[Mhyde52]

They're all short. I had large sets of Metric and SAE, sold them. Great quality wrenches, but they have really limited themselves with their length. If they had a full polished chrome long length in both SAE and metric I'd have been all over them. Too bad.

 

[JR 42]

Last I checked, the Wright 19mm and 3/4" wrenches were the same length, a hair over 10". Here's a chart of Wright part numbers and wrench lengths.

SAE
1112 6.000" 3/8"
1114 6.500"
1116 7.156" 1/2"
1118 7.934"
1120 8.547"
1122 9.125"
1124 10.047" 3/4"
1126 10.828"
1128 11.750"
1130 12.562"
1132 13.312" 1"

Metric
12-10MM 155.85mm / 6.136"
12-11MM 165.13mm / 6.501"
12-12MM 173.86mm / 6.845"
12-13MM 181.76mm / 7.156"
12-14MM 201.8mm / 7.945"
12-15MM 209.25mm / 8.238"
12-16MM 216.92mm / 8.540"
12-17MM 231.78mm / 9.125"
12-18MM 242.57mm / 9.55"
12-19MM 255.24mm / 10.049" ~3/4" opening
12-20MM 275.13mm / 10.832"
12-21MM 286.97mm / 11.298"
12-22MM 298.09mm / 11.736"
12-23MM 308.81mm / 12.158"
12-24MM 319.13mm / 12.564"
12-25MM 338.12mm / 13.312"

ETA - they're longer than Craftsman RP/ Armstrong/ SK/ Carlyle regular length wrench, but shorter than Snap-On regular/ Craftsman Pro/ SK/ Armstrong/ Carlyle etc. long pattern.

JR

 

[Jeff590]

Perfect - thanks!