WTB: assorted 'Gearwrenches' and Bonney Combos

[71Datsun510Wagon]

I'm looking for the following ratcheting wrenches:

SAE:
1/4" short ratcheting combo
5/16" short ratcheting combo

1/4" regular ratcheting combo
11/16" regular ratcheting combo

1/4" flexible regular ratcheting combo
5/16" flexible regular ratcheting combo

Metric:
8mm short ratcheting combo
9mm short ratcheting combo
11mm short ratcheting combo
17mm short ratcheting combo
19mm short ratcheting combo

9mm regular ratcheting combo - found, thanks Even 11!
11mm regular ratcheting combo
16mm regular ratcheting combo
19mm regular ratcheting combo - found, thanks Even 11!

I also looking for some Bonney polished combination wrenches.

Like this:

... photo courtesy of Alloy Artifacts web site.

I'm looking for Bonney SAE and Metric combos, 6 point and 12 point.

So far I have:
- 7/16" 12 point
- 1/2", 6 point - found, thanks Busted Knuckles
- 9/16", 6 point - found, thanks Busted Knuckles!
- 5/8" 12 point
- 3/4" 12 point
- 1" 12 point
combo wrenches. I have no metric. Please LMK if you have anything available.

Thanks,

Rob

 

[Busted_Knuckles]

Hi Rob,

Don't know if you watch ebay, I listed a set of "Like New" Bonney METRIC Combos about a week ago. 10mm-19mm complete. If you click on my user, I think you will find a link to my ebay store, or you can search ebay for bonney metric wrench, the returns are pretty short. Ive also got a couple bonney SAE Full polish odd balls, are you looking for a full set or just replacing lost ones, thanks, Bill

 

[71Datsun510Wagon]

Thanks Bill,

PM sent to you. I also modded my posting to give some detail as to what I currently have for SAE. I'm looking for both SAE and metric polished Bonney combo's.

Rob

 

[TooTall]

Hi,
Can't help on the wrenches but I noticed you screen name. I had a 71 510 wagon. Terrific car. I had a warmed over L16 with a head from Electramotive that came out of a friends autocross car. I put a set of Hitachi-SUs on it and that thing just ran and ran. Used to regularly embarrass BMW 320s. I rarely see any 510s around anymore and most of them look pretty clapped out.

Good luck on the tool hunt.

Cheers,
Kurt O.

 

[glenmore]

I have a 3/4 x 7/8 box offset BONNEY 2808 and 3/4 x 13/16 offset box BONNEY 2808F if you need those.

 

[Even 11]

I think I have some of the regular metric Gearwrenches you need, I'll look in the morning and PM you.

-Dane

 

[71Datsun510Wagon]

.... Ive also got a couple bonney SAE Full polish odd balls, are you looking for a full set or just replacing lost ones, thanks, Bill

Thanks again Bill,

Please PM me when you are ready!

Hi,
Can't help on the wrenches but I noticed you screen name....

Cheers,
Kurt O.

Thanks Kurt,

I used to run 510s in local club activities. Autocross, slalom, TSD rally, hillclimb, etc. Years and years ago ('80's), then got married, had kids and sold off the 'fun' cars. The kids are grown now so I get to spend a little money on me. I came across a 510 Wagon that was relatively solid but it is still a project car. It has taken a back burner to my Locost 7 build and recent purchase of a '93 Mini. I have too many things that distract my attention! I need to focus on one project at a time. A VG30 conversion is planned for the 510 but I haven't progressed beyond the parts gathering stage.

I have a 3/4 x 7/8 box offset BONNEY 2808 and 3/4 x 13/16 offset box BONNEY 2808F if you need those.

Thanks for the offer Glenmore. I do appreciate it but I'm set for SAE and metric high-angle box wrenches. However I am looking for zero degree box wrenches (or low angle 5 degree(?.. I think) box wrenches. Made in Canada (or USA) brands preferred. I have two old Grays so far:

I think I have some of the regular metric Gearwrenches you need, I'll look in the morning and PM you.

-Dane

Thanks Dane,
Please keep me posted.




My thanks to all for the response!

 

[Even 11]

Datsun;

PM inbound!

-Dane

 

[71Datsun510Wagon]

Bump from page 22!

Anybody else have anything from my wanted list? See Post 1 please.

Thanks!