WTB Craftsman Sockets - Laser etched

[jashgtp]

Looking to fill out my socket set. looking for this style sockets though. Let me know if you are looking to sell any or sets that contain these sizes.

Thanks. 2 down 41 to go

1/4" DRIVE 6 POINT DEEP
1/8 5/32 11/32 1/2 9/16 5/8

4 4.5 5 11 12 13 14 15

1/4" DRIVE 6 POINT Standard
1/8 5/8

4.5 15

3/8" DRIVE 6 POINT DEEP
1/4 5/16 11/16 3/4 13/16 7/8 15/16 1

6 7 8 16 17 18 19 20

3/8" DRIVE 6 POINT Standard
13/16 7/8 15/16 1

18 19 20

 

[hoopty388]

I have some singles I will check and get with you

 

[Wrenchette]

It is very possible we have a lot of those, I shall look tomorrow.

 

[jashgtp]

thanks to both of you for checking!

 

[O RLY]

Check ebay also. You have some big gaps to fill there.

 

[Wrenchette]

All I found was an 11 and 14 1/4 deep. I'm pretty sure Craftsman does not make several of the sizes you're needing, unfortunately.

 

[iandh]

I can confirm that they do not make a 5.5mm 1/4" drive deep socket, only 5mm and 6mm

I recently was filling a set myself.

I'm also unsure about the 1/8x1/4", and the 1/4x3/8" drive

Sorry if this is against classifieds rules, just trying to be helpful

 

[SnowBlaZeR2]

I have one that you need, but I don't think a single socket is really worth sending. I also have a list of every socket Craftsman offers as I am also trying to complete and older set. Shoot me a PM if you want it.

John

 

[jashgtp]

@iandh thanks for the heads up its weird that don't offer some of the sizes.

I am just trying to get all the sizes that are on the hansen socket trays. I might have to go to snap-on or other manufactures for those i guess

 

[iandh]

@iandh thanks for the heads up its weird that don't offer some of the sizes.

I am just trying to get all the sizes that are on the hansen socket trays. I might have to go to snap-on or other manufactures for those i guess

Yeah I find it strange too, they offer 5.5 in standard, why not deep?

It isn't a super common size, I suppose they don't make 5.5mm screws long enough to need a deep socket.

 

[hoopty388]

the only thing on your list i had was another 11mm

sorry

good luck

 

[camaross]

I have a set of like new condition Craftsman 1/4" Dr metric deep sockets (laser-etched). Sizes are from 5 mm to 13mm.

How about $15 shipped?