n8n
Well-known member
Looking for the following... I've scrounged all I can out of my spare toolbox and my local Craigslist, pawn shops, etc. I am trying to put together a socket set for my girlfriend so I'm not always trucking my tools over to her place. Craftsman USA will be fine as about half the stuff I've dumped on her is that, although there's quite a bit of SK, Snap-On, etc. mixed into some of the sets. Better always considered!
Figured I would post this here before I started hitting eBay for the missing parts and/or old Cman USA sets. What you got?
looking for 6 points only...
1/4" drive
11, 12mm deep (pref. Cman to finish a complete 1/4" set to give to someone)
2x 13mm deep (pref. Cman for one, as above)
2x universal joint
---
3/8" drive
nothing! (thanks to GJ)
---
1/2" drive
ALL SAE deep
20mm and any size larger than 20mm shallow
ALL Metric deep
For me, prefer SK as all my 1/2" 6-points are new SK (because my girlfriend is awesome and hooked me up for Christmas)
1", 1-1/16", 1-1/8" deep
20, 21, 22, 23, 24 deep (these are the ones that don't come with the 4147-6 set)
---
drive adapters:
2x 1/4"F - 3/8"M
---
combination wrenches:
10, 18, 19mm 12pt.
11/32" or smaller 6pt.
5/8" 6pt.
Let me know what you got! Banged up is OK as long as it's serviceable, inexpensive is a bonus. Unfortunately I have little to trade as I've given away most of my spare tools to the needy recently.
I do have some 3/4" drive stuff to trade if that helps any, here's my thread for that
http://www.garagejournal.com/forum/showthread.php?t=277725
Figured I would post this here before I started hitting eBay for the missing parts and/or old Cman USA sets. What you got?
looking for 6 points only...
1/4" drive
11, 12mm deep (pref. Cman to finish a complete 1/4" set to give to someone)
2x 13mm deep (pref. Cman for one, as above)
2x universal joint
---
3/8" drive
nothing! (thanks to GJ)
---
1/2" drive
ALL SAE deep
20mm and any size larger than 20mm shallow
ALL Metric deep
For me, prefer SK as all my 1/2" 6-points are new SK (because my girlfriend is awesome and hooked me up for Christmas)
1", 1-1/16", 1-1/8" deep
20, 21, 22, 23, 24 deep (these are the ones that don't come with the 4147-6 set)
---
drive adapters:
2x 1/4"F - 3/8"M
---
combination wrenches:
10, 18, 19mm 12pt.
11/32" or smaller 6pt.
5/8" 6pt.
Let me know what you got! Banged up is OK as long as it's serviceable, inexpensive is a bonus. Unfortunately I have little to trade as I've given away most of my spare tools to the needy recently.
I do have some 3/4" drive stuff to trade if that helps any, here's my thread for that
http://www.garagejournal.com/forum/showthread.php?t=277725
Last edited: