WTB: Proto professional wrenches

[kylefitz]

Looking to fill out set.
Need:
Proto Professional 1222 11/16" combo found thanks to Larry Randall
Proto Professional 1224 3/4" combo found thanks to Rickster
Proto Professional 1226 13/16" combofound thanks to Rickster
Proto Professional 1228 7/8" combo
Proto Professional 1230 15/16" combo found thanks to Rickster
Proto Professional 1232 1" combofound thanks to Rickster
Proto Professional 1236 1 1/8" combo
Proto Professional 1238 1 3/16" combo

Proto Professional 1207m 7mm combo found thanks to atari
Proto Professional 1208m 8mm combofound thanks to atari
Proto Professional 1209m 9mm combofound thanks to ebay
Proto Professional 1210m 10mm combofound thanks to atari
Proto Professional 1211m 11mm combofound thanks to ebay
Proto Professional 1212m 12mm combofound thanks to atari
Proto Professional 1213m 13mm combo found thanks to Rickster
Proto Professional 1214m 14mm combo found thanks to Rickster
Proto Professional 1215m 15mm combo
Proto Professional 1216m 16mm combo
Proto Professional 1217m 17mm combo found thanks to Rickster
Proto Professional 1218m 18mm combo
Proto Professional 1220m 20mm combofound thanks to atari
Proto Professional 1222m 22mm combo
Proto Professional 1223m 23mm combo
Proto Professional 1224m 24mm combo
Proto Professional 1225m 25mm combo
Proto Professional 1226m 26mm combo
Proto Professional 3757 3/4" 6pt. flare open combo found thanks to Ebay
Proto Professional 3710 10mm x 12mm double 6pt. flare
Proto Professional 3715m 15mm x 17mm double 6pt flare

4 way angle wrenches
Proto Professional or Proto Los angles
7/16
1/2
5/8
11/16
3/4
13/16
1 1/8
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2



Thank you

 

[atari]

I have some proto stuff laying around. They are proto prof but I think only the center is polished. I have 1220M, 1212M, 1210M, 1208M, and 1207M. I will take some pictures tomorrow when im at the shop.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

Rickster you have a pm

 

[atari]

Sorry for the bad phone-tography, its the only digital I have at the moment. The bottom 5 are the proto units. I would say they are almost as nice as the standard set in the previous pictures. I have not even cleaned them so they will probly be about the same as the standards after some TLC. PM me if your interested, Sorry it took so long. -Ben

 

[alex71]

Not on your list, but I have a Proto Pro adjustable. $8

 

[kylefitz]

atari:I will hold off for now and wait to see if anything else comes up. I will keep you in min though.

alec71: thanks for the offer but i already have a 706, 708, 710, and a 712

 

[jjarrell4]

I have proto 1 1/8" what do you think best way to ship is??

 

[kylefitz]

I have proto 1 1/8" what do you think best way to ship is??

I would try a big legal sized mailer. If you cut a piece of card board to fit snugly inside the envelope and zip tie the wrench to the card board it should be fine. I would also tape all the seams and edges. How much were you thinking about selling it for?

 

[jjarrell4]

Havent a clue whats it worth to you?

 

[kylefitz]

Havent a clue whats it worth to you?

How does 15 shipped sound to you?

Also I updated the original post because of more needs/wants.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

Take another 4 bucks for the middle 3/8 flare combo? I sent paypal for the first order last
night. Can you ship these together?

 

[jjarrell4]

Let me see how much it will be to ship then I will pm ya

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

Okay I will shoot that 4 your way right now Rick.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

Take another 6 for the pair? make it an even 10. The top one has grind marks on both edges right? Is this going to be a never ending process? lol

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

Meet you in the middle and go 7 and 4? Any other proto goodness over there?

 

[kylefitz]

hate to back out but I will just take the obstruction wrenches for the full 8. I found a set of flare combos.

 

[kylefitz]

Got my wrenches from Rick today and I can't say enough about his packing job. I will let the pictures speak for themselves.

 

[kylefitz]

Major additions to the first post

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[kylefitz]

bump to the top.
Just got my wrenches from Rick.

 

[RM209]

I have the 7/8” combination, Model 1228. Like Atari said, only the center is polished. It’s got some scratches and a nick or two, but is in good serviceable condition.

Let me know if interested.
RM209

 

[kylefitz]

Bump
I updated the first post with even more wants.

 

[premierplayer]

Cleaning house, there is proabably more, I'll get it up as I discover more.

Offset box end
3/8 - 7/16
5/8 - 11/16
very lightly if ever used, no owner markings
$16 for the pair shipped, USA only shipping

10" slip joint pliers
very clean, lightly used, looks like there may have been a arc/sparking accident on one jaw (see pic, reverse side w/o tape measure), has two (2) light grind marks.
these are nice large old school pliers
$14 shipped, USA only shipping

3/8" drive crow foot
9/16 & 3/4
light use, no markings
$14 shipped, USA shipping only

Shortie offset box end
5/8 - 3/4
this one is not the 'Professional' series, it has darkened more than the picture represents
in very good lightly used condition
no owner markings
$12 shipped, USA shipping only

Shipping prices will be adjusted for multiple items.

 

[Elroy]

Any interest in this 3/8 drive 13/16 plug socket?

 

[manic_mechanic]

All I have is a 9/16 combo and a 712SL adj. wrench...

 

[kylefitz]

to the top. bump.