WTB: Western, Williams, SK

[toolmutt]

Hello GJ! I have been following the site for a few months and this is my first post. I am looking to fill some gaps and extend some sets, and I know you can help. The first is a set of 1/2" drive Western sockets. I don't know how old they are, they were my Dad's. I have 11/16, 3/4, 25/32, 13/16, 15/16 and 1 inch. I need any other sizes. The second is a pair of Williams Superrench short double box end wrenches. I have 9/16-1/2 (#6725B) and 7/16-3/8 (#6723). I would like anything above (or below but I don't think they made any below). And finally, some SK sockets. I have 3/8" drive 9/16, 5/8, 11/16, 3/4, 7/8 and 1/4" drive 3/16, 7/32, 9/32, 11/32, 3/8, all shallow. I am interested in anything else.

EDIT: The Western sockets were manufactured by Duro like the second socket in Fig. 54 at the bottom of this alloy-artifacts page http://home.comcast.net/~alloy-artifacts/duro-indestro-p3.html#socket-id. I would be interested in similar Duro-Chrome sockets as well.

 

[Packard V8]

See if any of these are what you need.

3/8"dr - 1" extension, 7/16"deep, 3/8, 9/16(2), 5/8(2) 3/4 (2), 13/16, 7/8, 13mm, 17mm
1/2"dr - 7/16, 19/32, 11/16", 3/4", 1/2" 8pt(just added and not in the photo)
Some of the 3/8" are new-never-used, still have the $3.99-4.49 stickers on them, some are used with light engraving.

thnx, jack vines

 

[toolmutt]

PM sent to Packard V8

 

[toolmutt]

Thanks to PackardV8 for the SK sockets.

Bump...please see edit on original post.