wtb williams 3/8 superrench

[eric87]

i have been putting together a set of superrenches all i need is the 3/8 1160 and 1'' and larger. i do have some extras so would be willing to trade.

 

[rktolds]

I have a couple of them that may help you out. I have the larger sizes. I'll check when I get home

 

[petty4243]

do youhave a 5/8? i am also putting a set together....I need larger than 1 1/8 , 5/8 and smaller than 1/2.... not sure of part numbers off hand... they are the satin finish and very long

 

[eric87]

do youhave a 5/8? i am also putting a set together....I need larger than 1 1/8 , 5/8 and smaller than 1/2.... not sure of part numbers off hand... they are the satin finish and very long

yes i have 3 of them#1164 and 2 bxoe-20 they look like the same wrench. i also have a a 1/2 but it looks like someone did some grinding on the box end

 

[eric87]

the small ones are hard to find. i am going to a swap meet this weekend will be on the look out for more.

 

[petty4243]

send me a message with some prices , or look at some of my old listing and see if anything tripps your trigger for swaping material

 

[petty4243]

by the way, thanks

 

[bmwpower]

You need this one?

http://www.garagejournal.com/forum/showpost.php?p=407533&postcount=4

 

[eric87]

You need this one?

http://www.garagejournal.com/forum/showpost.php?p=407533&postcount=4

no the wrenches i am looking for look like this

 

[petty4243]

no the wrenches i am looking for look like this

agreed, that is the series i am working on as well.... correcting my sizes i need

smaller than 3/8(if any available)???, 5/8, 7/8, 15/16 and anything above 1 1/8

 

[eric87]

i still need that 3/8 wrench

 

[Scooterfish]

I`m putting a set together too. I don`t have any dups at this time. If I find dups this summer I will get them and maybe we can trade to help each other out. I scored a 15/16 combo (good condition) at a flea sat. for $2

 

[petty4243]

I do have an extra 3/4"

 

[Scooterfish]

The 15/16 I picked up this weekend has #1168, it is 15/16 opening. My 1 inch is 1170.
My 3/4 is 1166.
Shouldn`t the 15/16 be 1169?

 

[eric87]

i have 15/16 1168, 7/8 1167, 13/16 1167A, 25/32 1166A, 3/4 1166, 11/16 1165, 5/8 1164, 19/32 1163A, 9/16 1163, 1/2 1162, 7/16 1161 ,11/32 1159A, 5/16 1159, 1/4 1158 I STILL NEED 3/8 1160

 

[petty4243]

The 15/16 I picked up this weekend has #1168, it is 15/16 opening. My 1 inch is 1170.
My 3/4 is 1166.shouldn`t it be 1169?

1166 is the correct number, 3/4 is smaller than both the 1" and 15/16, plus a few more between them

 

[Scooterfish]

Eric & Petty

I`m saying if my 15/16 is #1168, my 1 inch is #1170, what would be #1169?

I see by the list above the odd size 9/32 has an "a"

Eric you should look for the 1 inch as well

 

[petty4243]

i have 15/16 1168, 7/8 1167, 13/16 1167A, 25/32 1166A, 3/4 1166, 11/16 1165, 5/8 1164, 9/32 1163A, 9/16 1163, 1/2 1162, 7/16 1161 ,11/32 1159A, 5/16 1159, 1/4 1158 I STILL NEED 3/8 1160

just wondering... is the 9/32 supposed to be a 19/32?

would fit the order of part numbers by size better that way....

 

[eric87]

just wondering... is the 9/32 supposed to be a 19/32?

would fit the order of part numbers by size better that way....

yes 19/32 i wonder if there are any other A wrenches

 

[petty4243]

yes 19/32 i wonder if there are any other A wrenches

another question... why a rather than the next number in continuation as majority of them are... did williams have another part with that number already?

 

[eric87]

still need a 3/8 superrench