LoneGunman
Well-known member
1) Lot of six Snap On wrenches, small scratches here and there, they have been used, very nice bright chrome. 19mm Flank Drive Plus (SOEXM19), 15MM (OEXM150A), 14MM Flank Drive Plus (SOEXM14), 13MM (OEXM130A), 12MM Flank Drive Plus (SOEXM12), 11MM Flank Drive Plus (SOEXM11). *SOLD, thank you "Dave3FL".
These are extras from trying to get a complete set of Flank Drive Plus, these are the NICER ones, I kept the ones in worse shape to use. The 12MM has a few dings in it but nothing through the the chrome, I can't get them to show up on the camera. The 13mm has a super faint engraving that the camera will not pick up and is only visible if you are looking for it. I have polished these wrenches, that's why they look so good. Obviously they are not collectible but I wanted to mention it anyway. New from Snap on would be in the $180 range, I would like $85 shipped or trade for Snap On SAE wrenches in as good condition, meaning no thin chrome, flaking ETC.
2) Set of three new Knipex locking pliers. Models 4114450, 4104250 and 4214280. New from Chadstoolbox would run you $94.11 without shipping, I would like $75 shipped. These are perfect in every way. I'm selling these and the other stuff to fund a project, I have plenty of used and beat of vise grips to use.*SOLD Thank you "Paumanok"
3) Hazet 916F, new and in the box. The ratchets has only been out of my box for pic taking. Again, I'm trying to fund a project, I'm also a picky SOB when it comes to things matching (hence the SOEXM set I HAD to have). I can't get passed the idea of the blasted finish and handle, I'm a chrome ratchet with a bare chrome handle kind of guy. This ratchet cost me $91.81 plus shipping from Chadstoolbox, I will sell it for $80 shipped or trade for a perfect (or close to it) Snap On 80 series 1/2" ratchet.
4) Knipex 7007180 1000v insulated 7.25" diagonal cutting pliers. These are also new and perfect. $47.43 from Chads without shipping, I'd like $35 shipped.
5) Knipex 2616200 1000v insulated 8" long needle nose cutting pliers, these are also new and perfect. $41.72 from Chads without shipping, I'd like $30 shipped.
6) Two box end wrenches. One Snap On XV2226 13/16" - 11/16", pretty rough, missing chrome and has pitting but is 100% functional. Elora 1" - 15/16", missing some chrome, also 100% functional, really heavy well made German wrench. $17 shipped for the pair.
The pic of the Snap On box end makes it look better than it is, the wrench was polished so the pitting is hard to see, I got it this way when I purchased a lot of other stuff.
These are extras from trying to get a complete set of Flank Drive Plus, these are the NICER ones, I kept the ones in worse shape to use. The 12MM has a few dings in it but nothing through the the chrome, I can't get them to show up on the camera. The 13mm has a super faint engraving that the camera will not pick up and is only visible if you are looking for it. I have polished these wrenches, that's why they look so good. Obviously they are not collectible but I wanted to mention it anyway. New from Snap on would be in the $180 range, I would like $85 shipped or trade for Snap On SAE wrenches in as good condition, meaning no thin chrome, flaking ETC.
2) Set of three new Knipex locking pliers. Models 4114450, 4104250 and 4214280. New from Chadstoolbox would run you $94.11 without shipping, I would like $75 shipped. These are perfect in every way. I'm selling these and the other stuff to fund a project, I have plenty of used and beat of vise grips to use.*SOLD Thank you "Paumanok"
3) Hazet 916F, new and in the box. The ratchets has only been out of my box for pic taking. Again, I'm trying to fund a project, I'm also a picky SOB when it comes to things matching (hence the SOEXM set I HAD to have). I can't get passed the idea of the blasted finish and handle, I'm a chrome ratchet with a bare chrome handle kind of guy. This ratchet cost me $91.81 plus shipping from Chadstoolbox, I will sell it for $80 shipped or trade for a perfect (or close to it) Snap On 80 series 1/2" ratchet.
4) Knipex 7007180 1000v insulated 7.25" diagonal cutting pliers. These are also new and perfect. $47.43 from Chads without shipping, I'd like $35 shipped.
5) Knipex 2616200 1000v insulated 8" long needle nose cutting pliers, these are also new and perfect. $41.72 from Chads without shipping, I'd like $30 shipped.
6) Two box end wrenches. One Snap On XV2226 13/16" - 11/16", pretty rough, missing chrome and has pitting but is 100% functional. Elora 1" - 15/16", missing some chrome, also 100% functional, really heavy well made German wrench. $17 shipped for the pair.
The pic of the Snap On box end makes it look better than it is, the wrench was polished so the pitting is hard to see, I got it this way when I purchased a lot of other stuff.
Last edited:
PM sent. Do you have any pics of the other side of the Hazet 916F , and how many teeth does it have? What is the handle length? Also, the knurled knob at the end of the handle has a hole machined into it - is it for a hex key or something?? Thanks