WTT--List

[alex71]

Updated 1/5/2011... trades or cash...

Tools wanted...U.S. Made. I like Snap-On, Mac, Matco, Proto, Bonney, Wright, Williams...

Snap-On cabinet screwdrivers, yellow hard handles. Must be in vg or better condition. Any part numbers except SDD146, SDD480, SDD4120

Matco metric 12pt combo wrenches: over 25mm and larger--part numbers MCL##M2 (## is the size in MM)

Matco SAE combo wrenches: 1", 1-1/8", 1-1/4" and larger, RCLxxx part numbers

Snap-On SAE Combo wrenches OEX with OLD SCRIPT over 1-1/4"

Snap-on metric combo wrenches OEXMxx0B 23mm and up, and 9mm and smaller

24" 1/2" drive breaker bar

24" 1/2" drive ratchet

Set of pro-brand (truck brands, proto, bonney, etc... No craftsman!) metric stubby combo wrenches
Set of pro-brand metric ratcheting wrenches (double box)

Mac COB series Flare/Open end combos 11/16 and larger
Billings 600 series check nut wrenches (thin single open end)
Martin 600 series check nut wrenches 1" and larger (thin single open end)

Set of U.S. made service wrenches

Mac 1/2" drive deep impact sockets, VDP series: 20mm, 23mm, 25mm, 27mm, 3/8"
Mac 1/2" drive impact sockets, VP series: 20 mm, 24mm, 25mm, 27mm

Mac 3/8" drive sockets: X series: 20mm, 1"

Always looking for Billings, Williams, Armstrong, etc. single open-end wrenches and single box end wrenches. Tappet wrenches. As long as they're cheap and in descent conditoin.

And maybe other stuff.. try me!

 

[JohnK007]

Alex, did you see this on CL today? Might be something you'd be interested in.

http://chicago.craigslist.org/nch/tls/1266195213.html

 

[alex71]

Thanks, I'll be picking those up this week (for $30)

 

[alex71]

Picked those up today. Just makes me want more. Don't know why, but that's just how it is...

 

[alex71]

a bump and an add..
Snap-On OEXM120B 12 mm flank-drive combo

anyone have one? or anything else on the list?

 

[alex71]

I've updated the list in the OP. I have a few things for sale right now, and I'm open to trades for anything on this list.

 

[Red Green]

Is the adapter 3/4 m or 3/4 f ?

 

[alex71]

3/4 f to 1/2 m... I guess I could also use a 1/4 to 3/8 adapter (again f to m)

 

[alex71]

put this one back on the list: Snap-On OEXM120B 12pt 12mm combo, new script.

 

[mtwaterguy]

PM sent on adapter

 

[OldToolMan]

got 1 new OEXM120B 12mm and a 5453 PROTO 3/4" down to 1/2" new oexm240,24mm. oexm270. oexm300..let me know if still interested. larry

 

[norry]

Set of pro-brand (truck brands, proto, bonney, etc... No craftsman!) metric stubby combo wrenches

Epstein's has a decent set at the bottom of this page:

http://www.harryepstein.com/williamslclampsadjustables.htm

IMHO $52 for an entire set of Williams, brand new, isn't too bad....

 

[alex71]

got 1 new OEXM120B 12mm and a 5453 PROTO 3/4" down to 1/2" new oexm240,24mm. oexm270. oexm300..let me know if still interested. larry

Sent you a PM...

Epstein's has a decent set at the bottom of this page:

http://www.harryepstein.com/williamslclampsadjustables.htm

IMHO $52 for an entire set of Williams, brand new, isn't too bad....

No, not bad at all. I'd buy them today if I was in a hurry.. and I still might, eventually... Thanks for the heads up.

 

[Even 11]

http://cosprings.craigslist.org/tls/1549563594.html

I do not know the guy or if he would ship, but I found this on CL. Let me know if I can help with it.

-Dane

 

[Garapeto]

i may have the adapter your looking for.

http://www.garagejournal.com/forum/showthread.php?t=53267

 

[alex71]

updated today.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[hickmlg09]

Are you intrested in any sockets?

 

[alex71]

Are you intrested in any sockets?

I only need to fill in a couple of holes in my existing sets (the mac sockets, see OP) but I guess I'm always interested in other stuff

Rickster, I sent you a PM.

 

[alex71]

updated again today. Thank you for participating

 

[Toolhorder]

I have a set of Mac metric stubby's with the original yellow plastic tray I'm interested in trading for. What do you have?

 

[alex71]

I have a partial set of old snap-on 1/2" drive impact sockets, a set of craftsman 1/4" drive sockets in regular and deep, some misc. apex and proto sockets, lots of old US wrenches, apex magnetic nutsetters, apex 1/4" hex drive bits (lots of different ones, torx, phillips, slotted, pzd, square... I still have to sort through them)... plus all the stuff on my website--crimp connectors, hardware, loom clamps, antiseize, etc. etc.

 

[alex71]

bump. still many nice items left. don't be afraid to shoot me an offer.

 

[MatcoTrknTools4Sale]

I see you like tools well im a retired matco tool dealer and i got tools for sale even selling my2002 frieghtliner tool truck fully set up for distributing .heres my email [email protected]

 

[O RLY]

I see you like tools well im a retired matco tool dealer and i got tools for sale even selling my2002 frieghtliner tool truck fully set up for distributing .heres my email [email protected]

Hey GLWS guy!