Zoro Deals Thread

[LB-1911]

I got the 10%, 15%, and 20% coupons.

Anything beyond that continues to give me the same 20% coupon code.

That is because 20% is the max.

i emailed the pakkit team at zoro and they said the highest discount you can get through the game is 20%

http://www.garagejournal.com/forum/showthread.php?t=315416


You may just have to wait until...

*
April 13 - $35 off $125+ - Code RAINING


May 19 - 25% off $175+ - Code BLOSSOM

June 27 - 20% off $200+ - Code WARMINGUP

July 18-19 - $50 off $250+ - Code COOKOUT

August 8 - 10% off $100+ - Code AUTUMN

September 5-6 - $25 off $100+ - Code FALLTIME

October 11 - 10% off 125+ or 20% off 225+ - Code USETOOLS

November 17 - 15% off $125+ - Code FREEZING

December 5 - Free knife with $150+ - Code BLADE

*Upcoming codes from calendar courtesy dacan23 -

 

[ChristineC]

Any premium codes out there? I have exhausted my Pakkit codes and have a major order to place today.

 

[Spdfreak91]

code gone

 

[Loscaldazar]

Just a heads up to GJers, as posted two posts before me (and elsewhere), tomorrow is one of the best codes you will find for Zoro in terms of overall percentage for a small/medium sized order. If you can keep your order total to just over $125 you end up with about 28% off. It rarely gets better than that.

April 13 - $35 off $125+ - Code RAINING

Thanks for the heads up. 28% off is good enough to jump on this one for a few items I really need (total came out to $125.73!), and save most of my car for the next 30% off sale.

Have they had a 30% off this year yet? Last one I can find was the 1st of December...

 

[cgrutt]

Thanks! I was going to order some stuff tonight but will wait a bit and see if the coupon works. Appreciate it.

 

[DaveWB]

CUTDOLLARS for 20% off until 4/13

 

[paulsomlo]

Promo Code "raining" is now active.

 

[ChristineC]

CUTDOLLARS -- You are my hero!!

 

[LB-1911]

Just a heads up to GJers, as posted two posts before me (and elsewhere), tomorrow is one of the best codes you will find for Zoro in terms of overall percentage for a small/medium sized order.

If you can keep your order total to just over $125 you end up with about 28% off. It rarely gets better than that.

April 13 - $35 off $125+ - Code RAINING

Promo Code "raining" is now active.

Offer valid until April 13, 2016 - 11:59 PM CT

Edit to add
Ridgid Pipe Wrench Buy 24" and 18" get 10" free

Ridgid currently has a promotion where if you Buy a 24" and an 18" pipe wrench you get a 10" pipe wrench free.

This applies to either the normal steel pipe wrenches or the aluminum pipe wrenches. You'll get the same type in 10" that you buy the 24" and 18" in. This can be stacked with promotions at Zoro and such to get a pretty good deal.

I was looking at possibly a set of aluminum pipe wrenches from them on April 13 since they have a $35 off $125+ code: RAINING.

24" Aluminum - Currently $88.44

18" Aluminum - Currently $55.48

$143.92 together -$35 off code = $108.92 for an 18" and 24" aluminum pipe wrench and you get a 10" aluminum free.

http://www.garagejournal.com/forum/showthread.php?p=5638729#post5638729

 

[paulsomlo]

"CUTDOLLARS" has a $200 minimum.

 

[TS3g]

I picked up a Durham 363-95 metal bin unit with 72 bins for $107.90 shipped with the RAINING code. That should help a bit with my bolt storage nightmare that I have going on now.

I know it's knit-picky, but I really wish Zoro had a wishlist setup like Amazon does. I had to clear about 25 things out of my cart to have just the bin unit. It sure would be nice to be able to save lists and load them in on sale days. But then again, Zoro has some excellent deals, so it's not too much of an issue to have to deal with little things like that if they continue having the discounts.

 

[Spn1025]

I picked up a Durham 363-95 metal bin unit with 72 bins for $107.90 shipped with the RAINING code. That should help a bit with my bolt storage nightmare that I have going on now.

I know it's knit-picky, but I really wish Zoro had a wishlist setup like Amazon does. I had to clear about 25 things out of my cart to have just the bin unit. It sure would be nice to be able to save lists and load them in on sale days. But then again, Zoro has some excellent deals, so it's not too much of an issue to have to deal with little things like that if they continue having the discounts.

Always improving.

We just can’t sit still. We’re constantly improving our site, service and already huge product selection so that you have the best possible experience doing business with us.

Give us your feedback »

https://www.zoro.com/contact

 

[TS3g]

Always improving.

We just can’t sit still. We’re constantly improving our site, service and already huge product selection so that you have the best possible experience doing business with us.

Give us your feedback »

https://www.zoro.com/contact

Good catch. Done

 

[NUISANCE]

If anyone uses 80/20 aluminum for projects Zoro has the best prices because of the free shipping and when you add on a coupon code it gets even better. I bought my 80/20 from them to build my tool box/work bench stand/legs and ordered some more using the raining code because, they have the best price on this stuff, and I need some more to finish some other projects I am working on.

 

[jobo1004]

I picked up a Durham 363-95 metal bin unit with 72 bins for $107.90 shipped with the RAINING code. That should help a bit with my bolt storage nightmare that I have going on now.

I know it's knit-picky, but I really wish Zoro had a wishlist setup like Amazon does. I had to clear about 25 things out of my cart to have just the bin unit. It sure would be nice to be able to save lists and load them in on sale days. But then again, Zoro has some excellent deals, so it's not too much of an issue to have to deal with little things like that if they continue having the discounts.

If you use the chrome browser and you're an Amazon user, just install the "Add to Amazon Wish List" extension from the chrome web store. Then you can add Zoro items to your Amazon wish list. Then just go to your Amazon wish list and purchase any Zoro items you wish whenever there is a sale. Obviously it would be better if there were a native option, but I find this one works quite well. You can even have a wish list specifically for Zoro items if you don't want to have to scroll through your main wish list looking for the Zoro items.

 

[Marv's Shop]

If you use the chrome browser and you're an Amazon user, just install the "Add to Amazon Wish List" extension from the chrome web store. Then you can add Zoro items to your Amazon wish list. Then just go to your Amazon wish list and purchase any Zoro items you wish whenever there is a sale. Obviously it would be better if there were a native option, but I find this one works quite well. You can even have a wish list specifically for Zoro items if you don't want to have to scroll through your main wish list looking for the Zoro items.

Thanks for the tip/idea. Works great. Created a separate Zoro wishlist in Amazon.

 

[Life]

I love you guys, used the 20% coupon to get a jet drill press last night. I've been searching CL for months with no luck. Couldn't take it anymore. Was about to buy the porter cable from Lowes but I think the Jet is a better buy. I just wish Zoro's site was a little better designed

 

[JonnyC]

I love you guys, used the 20% coupon to get a jet drill press last night. I've been searching CL for months with no luck. Couldn't take it anymore. Was about to buy the porter cable from Lowes but I think the Jet is a better buy. I just wish Zoro's site was a little better designed

Congrats! I went with the PC but a Jet would have been nice.

 

[nanofrog]

I love you guys, used the 20% coupon to get a jet drill press last night. I've been searching CL for months with no luck. Couldn't take it anymore. Was about to buy the porter cable from Lowes but I think the Jet is a better buy. I just wish Zoro's site was a little better designed

I suspect you'd like searching Grainger instead, then feed the manufacturer's P/N's into Zoro's site.

BTW, Grainger owns Zoro.

 

[Life]

I knew they owned them but didn't consider searching via Grainger's site. I'll do that next time.

As for the PC, my friend ended up buying it a few weeks ago. It is a very nice press, the quill travel is an inch longer vs. the Jet I believe. I know they're all made in China now, but I've had bad luck with Porter Cable and Jet always has parts... If the coupon hadn't been available I would have either waited until one was or bought the PC. We'll see if I made the right decision

 

[04chase]

Just ordered some nut and bolt bins



Two of these 72 bin, two 40 bin tops to go on these and a small base with feet for them.

I did price between zoro.com with a 20% coupon and jet.com with one of the many 15% coupons they gave me. Though I had too do 2 orders through jet.com as you can save a maximum $25 per order. It came out to about $40-$50 cheaper than zoro with the coupon. I'm in ca so it made me pay tax on zoro . That was why I ordered from jet.com on thursday. Two bins showed up today and the re st show a Tuesday delivery. All fulfilled by .......... zoro.

Sent from my SM-G900T using Tapatalk

 

[JoeMA]

...All fulfilled by .......... zoro

I read an article in the WSJ months ago. While growing, Jet's inventory and distribution network is limited compared to Amazon. Jet will place orders with other online vendors, such as Walmart (and apparently Zoro) to fulfill their customers' orders at a loss.

 

[kxlexus]

Just ordered some nut and bolt bins



Two of these 72 bin, two 40 bin tops to go on these and a small base with feet for them.

I did price between zoro.com with a 20% coupon and jet.com with one of the many 15% coupons they gave me. Though I had too do 2 orders through jet.com as you can save a maximum $25 per order. It came out to about $40-$50 cheaper than zoro with the coupon. I'm in ca so it made me pay tax on zoro . That was why I ordered from jet.com on thursday. Two bins showed up today and the re st show a Tuesday delivery. All fulfilled by .......... zoro.

Sent from my SM-G900T using Tapatalk

That is a nice looking bin

 

[04chase]

I read an article in the WSJ months ago. While growing, Jet's inventory and distribution network is limited compared to Amazon. Jet will place orders with other online vendors, such as Walmart (and apparently Zoro) to fulfill their customers' orders at a loss.

amazon reports losses every year as well , not sure what jet.com has planned to recover but for now ill reap the benefits .

For $100 i dont see how you can make one of these bins after all is said and done .

 

[winlinmac]

Any new codes available?

 

[KLO101489]

One time use code, expires the 22nd.

15% off

WBFE02CGN2

 

[LB-1911]

Any new codes available?

Here is another one I found:

N025C0DE4YEW

This one is good for 30% off $300 or more.

30CODEN0T4U

U may have to wait.....

May 19 - 25% off $175+ - Code BLOSSOM

June 27 - 20% off $200+ - Code WARMINGUP

July 18-19 - $50 off $250+ - Code COOKOUT
August 8 - 10% off $100+ - Code AUTUMN
September 5-6 - $25 off $100+ - Code FALLTIME
October 11 - 10% off 125+ or 20% off 225+ - Code USETOOLS
November 17 - 15% off $125+ - Code FREEZING
December 5 - Free knife with $150+ - Code BLADE

Calendar codes courtesy of dacan23

 

[winlinmac]

Ah, patience is a virtue...
Thank you for the timeline

U may have to wait.....

May 19 - 25% off $175+ - Code BLOSSOM

June 27 - 20% off $200+ - Code WARMINGUP

July 18-19 - $50 off $250+ - Code COOKOUT
August 8 - 10% off $100+ - Code AUTUMN
September 5-6 - $25 off $100+ - Code FALLTIME
October 11 - 10% off 125+ or 20% off 225+ - Code USETOOLS
November 17 - 15% off $125+ - Code FREEZING
December 5 - Free knife with $150+ - Code BLADE

Calendar codes courtesy of dacan23

 

[TS3g]

20% off $100 through the 22nd, one time use

APRT5QXFJ8

 

[Nemesis88]

Looks like someone grabbed the 20% posted by TS3g. Does anyone else happen to have one? Would like to place an order this morning. Thank you!

 

[Davefr]

Looks like someone grabbed the 20% posted by TS3g. Does anyone else happen to have one? Would like to place an order this morning. Thank you!

PSA: I anyone uses a one time code that someone has so generously shared, then please post a reply that it's been used so as not to waste anyone else's time trying to use it!!

 

[Strouty]

I don't see that happening, I bet most of the people using them don't even post on the forum.

 

[winlinmac]

I was going to use that one-time coupon, and it appears someone else already used it.

 

[macnewbie]

In order to avoid this what I do, and suggest others consider, is checking a few posts above before posting a code. if somebody has requested one I will just PM it. Otherwise I'll post it in the main forum for someone to ******.

 

[PureLeaf]

Anyone have a 20% off coupon code? Been playing that Pakkit game till my thumbs hurt. I hate that game!

 

[Nemesis88]

I'm still looking for one also if there is one available.

 

[06 DIESEL]

I got a 20% off $250 or 255 off $350 this morning in my email, first PM gets it. Good till 4-27 at 11:59PM

And it is taken.

 

[Strouty]

I got one too, but not sure if I am going to use it or not. At least I have some time to think about it.

I am thinking that 30% off codes are over and done with or they are severely limiting them. Probably used them as a way to get customers to the site, now they have a captive audience.

 

[matemike]

Edit: it's gone.

 

[dmw16]

Claimed.