Between 485 & 705 SQ/FT Jar944's 3car cabinet shop.
- Thread starter jar944
- Start date
Workspaces between 485 and 705 squarefeet.
iced98lx
ALLIANCE MEMBER
Congratulations!!! We're here for the delirious sleep-deprived rants about the projects left undone for the last year as you try to get a tiny human through the first year of its life.
PugetDude
ALLIANCE MEMBER
Congratulations, beautiful baby.
Finallygotit
ALLIANCE MEMBER
Congratulations!
ptt49er
Well-known member
Congrats! Great job Mom and Dad!
nicholam77
Well-known member
Congrats Jar!!
casmurbax
Well-known member
Congratulating
Boostingaz
Well-known member
Congrats! Enjoy every minute of it! Everyone always says the old "they grow up fast"......but I'm telling you it's true. 
manwithtools
ALLIANCE MEMBER
Congratulations, welcome to the next part of your life! Some of those house projects will go a little slower now. That's okay, enjoy the family while you can!
cccoltsicehockey
Well-known member
Congratulations! The lack of projects for a while will be well worth it.
Jayman17
Well-known member
Congrats to you and your wife on the new shop helper!
Duker
Well-known member
Just an idea for the tub Genie Superlift you can rent.....these hold 650lbs, non marring wheels and was a life savor moving couches and other furniture into our second story loft that we couldn't get up a circular stairway.2nd floor catwalk between the east and west sides of the house, open to the foyer and family room. Railings on both sides. The rails could come out. I moved them when the hardwood floors were installed to actually be parallel with each other. It's about 11' to the 2nd floor deck so a bit of a lift.
Actually I have 3 sections of baker scaffold here.. I could maybe lift it inside that. (The tub is 72" long) rigged at the top and go over the rail. It might take 6 sections (3x3) and lift between to clear.
The 90 degree turn on the front stair will be problematic if I go up the stairs.
larry4406
Well-known member
And just like that, a Jarlet is born!
Congrats to you and your wife! Exciting times!
Congrats to you and your wife! Exciting times!
jon72vega
Well-known member
Congrats on your new family member!
bugnut
ALLIANCE MEMBER
Jar, congrats, hope everyone is doing well!
No, it’s @jar945!
iced98lx
ALLIANCE MEMBER
daaang aint nothing small about that upgrade, that is a serious piece of kit.
RickP
Well-known member
Congrats on creating a new hooman!
Boostingaz
Well-known member
nicholam77
Well-known member
You've got to Trapps
ALLIANCE MEMBER
Congrats. Now you’ll really be busy! As others have said, long days, short years. Don’t blink.
I’ve been looking at SVS for a couple of years. Please share your experience after a few sessions.
I’ve been looking at SVS for a couple of years. Please share your experience after a few sessions.
That's one $$$ cod plunge!!It's a good thing I have a pallet jack, the freight company left this at the end of the driveway blocking any exit. Not even a heads up they were coming or a delivery notification. People were home and didn't even know until someone tried to leave.
casmurbax
Well-known member
That's messed up that they delivered it like that.
We managed to get it inside and into put staging area (aka the front parlor). It wasn't that bad for two of us to lift. It's mostly just awkward. Reevaluating the need to lift vs carry up the stairs.
In other news the baby is learning about his paternal heritage (through observation.) He is also learning about trolling his aunt who strongly dislikes pršut, even though that's actually a Serrano.
Trapps
ALLIANCE MEMBER
Babies and bathtubs are cute. That ham is dreamy!
With the slivo, I hope?
PugetDude
ALLIANCE MEMBER
The Holidays ARE upon us, Jar.
Trapps
ALLIANCE MEMBER
Sounds plum crazy to me.
PugetDude
ALLIANCE MEMBER
Don't be prunish.