Found a deal on craigslist? - List Here!
- Thread starter markf4e
- Start date
Shocker
Well-known member
It was pending by the time @four.cycle sent me an email on it. It is gone now. Looked like a cool old drill ready to be restored.
four.cycle
Well-known member
You need this
EASTSIDE (Maltby Duvall or thereabouts)
LINCOLN Lincwelder 180
posted approx. 15:55 PST 01/31/25
$50 OBO
seattle.craigslist.org
Owners Manual and literature ebay $24 OBO
EASTSIDE (Maltby Duvall or thereabouts)
LINCOLN Lincwelder 180
posted approx. 15:55 PST 01/31/25
$50 OBO
Lincoln Welder - tools - by owner - sale - craigslist
Lincoln Lincwelder. From what I've read online it's approximately 75 years old. I've had it for 20 years and used it about a dozen times over that period. Worked when I last used it 2 years ago but...
Owners Manual and literature ebay $24 OBO
Attachments
Last edited:
Outlawmws
Well-known member
NOPE! already got an AC/DC 225, and a High Freq head for it, but All I ever use is the Wire feed and my spot welder.
four.cycle
Well-known member
TACOMA Washington (University Place)
BAN SAW
posted approx 18:15 PST
$20
seattle.craigslist.org
TACOMA Washington (University Place)
Radial Arm Saw
posted approx 18:15 PST
$40
seattle.craigslist.org
BAN SAW
posted approx 18:15 PST
$20
Ban saw - tools - by owner - sale - craigslist
Ban-saw craftsmen , as-is, can test it out. Bring someone to help move it. Only $20 cash.
TACOMA Washington (University Place)
Radial Arm Saw
posted approx 18:15 PST
$40
Radial arm saw - tools - by owner - sale - craigslist
Works, craftsmen 10" saw, nice table top, can test it out. Needs togo moving sale , cheap price $40 cash
four.cycle
Well-known member
GRAYLAND, Washington
SINGLE WIDE MOBILE HOME
FREE
U-Haul it, baby!
posted about 9:00 am this morning Pacific Time
(Grayland is out on SR 105 - Drive to Cosmopolis and hang a right.)(Or... drive to Monte and hang a left.)(Or take the scenic route via WA6 and you can go through Pluvius. You've never been to Pluvius, have you?)
seattle.craigslist.org
SINGLE WIDE MOBILE HOME
FREE
U-Haul it, baby!
posted about 9:00 am this morning Pacific Time
(Grayland is out on SR 105 - Drive to Cosmopolis and hang a right.)(Or... drive to Monte and hang a left.)(Or take the scenic route via WA6 and you can go through Pluvius. You've never been to Pluvius, have you?)
Free Single Wide Mobile Home - You Haul - trailers - by owner - vehicle automotive sale - craigslist
1968 1 Bed, 1 Bath Single Wide Mobile Home Well Cared for. Need this removed from its location in Grayland, WA. We have the Title in hand as well Make: Fleetwood Model: 52ST/12
RMERR
Well-known member
Facebook Marketplace, Northern CA, Martinez, Stanley Vidmar cabinet, 5 drawer with butcher block top and dividers. Looks pretty decent for $250
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
I'd be on that like a fat kid on chocolate cake if it weren't on the other side of the country!
RMERR
Well-known member
Another nice cabinet on FB Marketplace. Metal two door cabinet w/multiple drawers inside in San Francisco, CA. Very nice for only $100 bucks. Got too many cabinets now or I'd snag it.
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Crabman
Well-known member
Naples Florida $1100
Big bottom box, lotta boxes for the money, look pretty good
Vintage Mac (base cabinet is Matco, top box is Mac) Tool Box heavy duty metal. Top box with lock. New paint and drawer liners. Call or text Bill
Base Box 25" deep 40" tall 53" wide
Top Box 17" deep 19" tall 33" wide
fortmyers.craigslist.org
Big bottom box, lotta boxes for the money, look pretty good
Vintage Mac (base cabinet is Matco, top box is Mac) Tool Box heavy duty metal. Top box with lock. New paint and drawer liners. Call or text Bill
Base Box 25" deep 40" tall 53" wide
Top Box 17" deep 19" tall 33" wide
Vintage Matco Tool Box - tools - by owner - sale - craigslist
Vintage Mac Tool Box heavy duty metal. Top box with lock. New paint and drawer liners. Call or text Bill Base Box 25" deep 40" tall 53" wide Top Box 17" deep 19" tall 33" wide
catalytic
Well-known member
Not craigslist, but ebay -- Burr King 760 for $500 in Florida. Comes with an extra platen and tensioner arm. I have a few -- it's a bullet proof machine and the company offers amazing support with everything still made in the USA (one of the last!). Missing the belt cover, which is ~$30 from Burr King.
This one is a 1980's model with a single phase motor that runs on household power, likely with 1hp (perfect for a standard 20a 110v household power circuit).
I can't find my resto's of my model 760's so here's a resto of its baby brother, the little model 562:
www.garagejournal.com
This one is a 1980's model with a single phase motor that runs on household power, likely with 1hp (perfect for a standard 20a 110v household power circuit).
I can't find my resto's of my model 760's so here's a resto of its baby brother, the little model 562:
Resto of a Burr King belt sander/grinder from 1953/54, one of their first (lots of pics)
I came across this Burr King model 562 circa 1953/1954 on a big auction site the other day. I have been hunting and restoring Burr Kings for a little over a decade, and every shop in SoCal has one since they were cast in Los Angeles and sold on Venice Boulevard for decades before they moved to...
www.garagejournal.com
four.cycle
Well-known member
WOODINVILLE Washington
Craftsman bottom roller box
FREE
bottom drawer is bent see photos!
seattle.craigslist.org
Craftsman bottom roller box
FREE
bottom drawer is bent see photos!
Craftsman 5 drawer rolling tool chest - free stuff - craigslist
Bottom draw is bent and does not slide easily
Shocker
Well-known member
Ridiculous deal on a nearly new USA made Speedaire 80g compressor. The only thing I don't care for is the horizontal tank vs a vertical one but for $300, it is a crazy good price. Leeson USA motor. Great deal.
seattle.craigslist.org
Like new speed, air air compressor 80 gallon - tools - by owner - sale - craigslist
Beautiful condition bought it for our shop we just don’t have the room for it. 80 gallon 200 psi fiveHP this is the big one absolutely zero disappointments. First come first serve. I have a forklift...
Josh Dekubber
Well-known member
Free Vise Burien Seattle area
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Cruzan80
Well-known member
Just saw this on FBMP. No room for me...
Pressteel roller, $50
www.facebook.com
Pressteel roller, $50
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Shocker
Well-known member
Trying on that vice...
Josh Dekubber
Well-known member
That's great I hope you get it! I'd grab it if I was a little closer.
Shocker
Well-known member
Nope, no reply and marked sold. Oh well. Would have been cool to refurb.
M.Brane
ALLIANCE MEMBER
Scored this cool old card file cabinet today for free. It's a heavy MF. I'll clean it up a bit, and use it for fastener storage. Good bye open bolt bins aka dust collectors.
Outlawmws
Well-known member
I have three of those old heavy duty card files I keep tools in mostly. they are great for handling weight.
You ****!
Outlawmws
Well-known member
And yes, M.Brane does!
starquestMM
Well-known member
Neat, I dont think I'd seen one where the individual drawers were designed to be removed like that.
Josh Dekubber
Well-known member
Picked up this vintage 1940s era Tiffany Table Company typewriter table for 20 bucks. It weighs a ton and after cleaning and greasing the wheel lifting mechanism it works like brand new.
Outlawmws
Well-known member
I have a similar one, same shrouded casters, staged for a stand for my 1937-41 Atlas Craftsman 8" table saw, and my 1936 7" tilting table saw is already on a similar stand, without the caster shrouds. That one has the motor under the table. super small table 11-1/4 X 14-1/2, but does a great job for ripping and fingerjoints..
Josh Dekubber
Well-known member
I remember you showing me this and that was part of my inspiration in looking for one for myself! So thank you!
81malibu81
Member
If I lived near Dallas, NC I'd be picking this up! Tall SC Lista with base and lots of dividers. Smokin' deal here:
Lista Tool Cabinet | eBay
11 drawer cabinet. Top needs to be cleaned and rust spots removed. Key hole has been picked. Don’t know model #. Local pick up only.
www.ebay.com
four.cycle
Well-known member
@Outlawmws do you have photos you can share? Thanks!
Outlawmws
Well-known member
Sure!:
An "in progress" shot - the motor is mounted to a 4" door hinge and the belt tension is the motor's weight - the top I reinforced with ply to keep flexing to a minimum since the saw "footprint" is so small:
Motor mount and the switch box is actually 2 boxes back to back, so the saw (or another tool) can be plugged in.
Josh Dekubber
Well-known member
I can't remember which one you have but I remember it was pretty nice also!
TurnipTruck
Well-known member
How often do you find someone parting out a half track?
Or a running barnfind DKW?
Or a running barnfind DKW?
four.cycle
Well-known member
REDMOND Washington
FREE Craftsman Table Saw
"ran when parked"
seattle.craigslist.org
REDMOND Washington
FREE Craftsman Tool "Organizer"
seattle.craigslist.org
REDMOND Washington
FREE Craftsman "Tool Table"
seattle.craigslist.org
LYNNWOOD Washington
FREE lawnmower
"ran when parked full of gas last fall"
seattle.craigslist.org
FREE Craftsman Table Saw
"ran when parked"
Free Sears Craftsman Table Saw - free stuff - craigslist
Rusty but could be revived. Worked the last time we used it.
REDMOND Washington
FREE Craftsman Tool "Organizer"
Free Craftsman Tool Organizer - free stuff - craigslist
It’s a bit aged and rusty in spots but all the drawers work. Delivery for a fee.
REDMOND Washington
FREE Craftsman "Tool Table"
Free Craftsman Tool Table - free stuff - craigslist
A but aged and rusty in spots but all the drawers function. Delivery available for a fee however free if you pick up.
LYNNWOOD Washington
FREE lawnmower
"ran when parked full of gas last fall"
Lawn mower - free stuff - craigslist
This mower worked before it sat in my shed for a year. It hates sitting and not being run and the stale fuel gets gunked up. If you know how to flush it you can fix it up easy. I switched to...
paulsomlo
Well-known member
Listed at about 9:47pm April 30 in Los Angeles - lathe, bandsaw, and drill press, $600 for all: https://www.facebook.com/marketplac...place_top_picks&referral_story_type=top_picks
four.cycle
Well-known member
SPANAWAY Washington (Elk Plain)
10 each 2-inch BESSEY C-clamps (made in China)(new)
$25
seattle.craigslist.org
SPANAWAY Washington (Elk Plain)
5 each ACE 6-inch putty knives (new)
$20
seattle.craigslist.org
SPANAWAY Washington (Elk Plain)
28 each Performance Tool Utility Knives (new)
$14
seattle.craigslist.org
10 each 2-inch BESSEY C-clamps (made in China)(new)
$25
(10) 2inch Bessey clamps NEW - tools - by owner - sale - craigslist
Ten 2" Bessey clamps NEW The price is for all 10 clamps
SPANAWAY Washington (Elk Plain)
5 each ACE 6-inch putty knives (new)
$20
(5) 6inch ACE Putty Knives, Joint Knifes NEW - tools - by owner - sale - craigslist
Five 6" ACE Putty knives or Joint Knives $20 for all 5 knives NEW
SPANAWAY Washington (Elk Plain)
28 each Performance Tool Utility Knives (new)
$14
(28) Utility knives - tools - by owner - sale - craigslist
28 Utility knives The price is for all 28 knives
Crabman
Well-known member
Hour and a half southeast of Wash DC
Lot of stuff, if it's USA (probably is from the looks I think) a nice deal maybe. I might go and look next week when I am back down in SoMd.
smd.craigslist.org
Craftsman tool collection - $185 (Lexington Park)
Lot of stuff, if it's USA (probably is from the looks I think) a nice deal maybe. I might go and look next week when I am back down in SoMd.
Craftsman tool collection - tools - by owner - sale - craigslist
lots of nice stuff. May trade for knives (military or sporting [nothing from Pakistan or China]). Thanks!!!
RMERR
Well-known member
San Francisco, CA Craigslist. Nice large industrial multi-drawer cabinets. Can't see a brand, but look to be in the Vidmar, Equipto, Lista mold. $150! A little paint and you've really got something. Got ehough cabinets or I'd grab em.
sfbay.craigslist.org
16 drawer tool or parts box ball bearing rollers - tools - by owner - sale - craigslist
16 drawer commercial metal tool/parts box has ball bearing rollers, roughly 4' h x 3.5'w x 3' depth. has a little minor rust just needs a little sanding and paint. this type box cost over couple...
Shoot, add a zero to that and it'd be usual asking price hereabouts!San Francisco, CA Craigslist. Nice large industrial multi-drawer cabinets. Can't see a brand, but look to be in the Vidmar, Equipto, Lista mold. $150! A little paint and you've really got something. Got ehough cabinets or I'd grab em.
16 drawer tool or parts box ball bearing rollers - tools - by owner - sale - craigslist
16 drawer commercial metal tool/parts box has ball bearing rollers, roughly 4' h x 3.5'w x 3' depth. has a little minor rust just needs a little sanding and paint. this type box cost over couple...