Sprayway saw blade cleaner....
- Thread starter Buckgnarly
- Start date
four.cycle
Well-known member
I just called Superior Saw here in Tacoma. They do not carry such a product, but suggested:
www.cmtorangetools.com
Formula 2050: Blade & Bit Cleaner Formula2050 | Systems and accessories | CMT Orange Tools USA & Canada
Looking for Formula 2050: Blade & Bit Cleaner Formula2050? You will find them in the Systems and accessories section of the CMT Orange Tools website. Visit the product page!
OP
Buckgnarly
Well-known member
Thanks, in my searching that seems to be about the next best thing!I just called Superior Saw here in Tacoma. They do not carry such a product, but suggested:
Formula 2050: Blade & Bit Cleaner Formula2050 | Systems and accessories | CMT Orange Tools USA & Canada
Looking for Formula 2050: Blade & Bit Cleaner Formula2050? You will find them in the Systems and accessories section of the CMT Orange Tools website. Visit the product page!
four.cycle
Well-known member
^ They ARE the saw people here locally.... if anybody would know, I would think it would be them.
I've been using Ballistol Harzlöser (resin remover) for years on my saw blades. I spray it on and let it set five to ten minutes and then wipe it off with paper towels.
Before:
After:
Before:
After:
alinc100
Well-known member
Simply, Simple Green a nylon toothbrush and a shallow dish
A 5-gallon bucket lid also works perfectly.
Old tool guy
Well-known member
- Joined
- Apr 13, 2023
- Messages
- 3,474
Spray on oven cleaner.
alinc100
Well-known member
May be an old wives tale but I heard the chemicals in oven cleaner can cause degradation of the carbide tips, making them loose.
BTL-A4
Well-known member
+1 for Simple Green in a 5-gallon bucket lid and a soft bristle brush. Works great.