Lets make an all vintage Snap-on tool picture thread!

[Oldtuleguy]

Snagged mine for 10$, then felt a bit guilty the seller did nor know what it was.

 

[930dreamer]

The more you know!

 

[Shelbylex]

Snagged mine for 10$, then felt a bit guilty the seller did nor know what it was.

OTG, I need some education here, What is it?

 

[MR.X]

Anyone have a reference for a 7/8” drive of this era in 2 1/4” hex?

 

[LesserSon]

Was it to much money to gamble on?

No - only $1! (Which is only 25¢ more than new ninety-five years ago.)
But as I said, it looked to me like it might be missing parts. I imagined something adjustable sliding in the slots, held by a screw. And I had no idea what it was. (Not that I have a use for it.)
I may see it again.

 

[Snaparxon]

I looked up the "Gripper" screwdriver and the description jogged my memory a bit, I was going to buy it because it had a cool looking handle construction and reminded me of the early Snap on 9/32" dr wood handled spinner, but I didn't because I thought a previous owner had modified it by cutting a slot in the end with a hacksaw.
She had several sales last year but I didn't see it until what now appears to have been her final yard sale, I waited all winter for her to have another one this year, but so far it's not looking like it's going to happen...

SNAP-ON Tools 1923 Catalog A : Jacko [email protected] : Free Download, Borrow, and Streaming : Internet Archive

This is the first Snap-On Catalog from 1923 Catalog A lovingly but not overly restored by Jacko.

archive.org

 

[2001ZR2]

That’d be a 1955

Thank my eyes were seeing the pit as a partial line for a 6 which my brain took as gospel.

 

[Oldtuleguy]

OTG, I need some education here, What is it?

My understanding of the gripper stuff is it was supplied by lauber.

 

[snapmom]

Anyone have a reference for a 7/8” drive of this era in 2 1/4” hex?

shows in the 8/29 cat

 

[Private Lugnutz]

My understanding of the gripper stuff is it was supplied by lauber.

I made that connection a few years ago, empirically, here...

Does anyone have any documentation that connects "THE GRIPPER" wooden tool and file handles sometimes found with Snap-on shanks (screwdriver, 9/32" spinner) stuck inside of them with the Snap-on Tool Company? Reason I ask is, I am doing some re-organizing in the Lugzsonian, I came upon my box of antique and vintage file and tool handles, and I have one called "THE LAUBER." As you can see, it is made exactly like "THE GRIPPER." Except for the name.

Here's an ad from a 1920's trade mag. The design is patented. So theres no way Snap-on made them. Now look where the Lauber Company was located. I'd bet not only my next paycheck, but every paycheck until I retire, that I just discovered who made Snap-on's early radio set handles.

...and I still have an extremely high level of confidence in my deduction, but I have not been able to confirm it with independent documentation.

 

[Shelbylex]

Thank you OTG, Snaparxon and Private Lugnutz!
... One more tool I did not know is interesting and worth remembering : )

 

[MR.X]

Not exactly Snap On but pertinent to handle sourcing in Brewtown. So a Lauber style handle is clearly visible in a 20's era MTF catalog and still shows up in a 31 cat as well thou in both it's a screwdriver while the bearing scraper illustration looks like a more conventional handle. Anyway, make of that what you want.

 

[d42jeep]

A couple of Lauber file handles I’ve run across.
-Don

 

[Private Lugnutz]

Not exactly Snap On but pertinent to handle sourcing in Brewtown.

Thanks for posting. Clearly expands the local principle.

 

[MR.X]

Here’s the cat. pics.

 

[Ayrhead]

I just Acquired a Snap -On King Pin Puller Set. #CG220A. The date on the instruction paper is 1-12-44. So from that information my guess is that this set is from 1944. Another addition for the Rampy Pickup…. Harry

 

[MR.X]

Thanks for posting. Clearly expands the local principle.

Not exactly Snap On but pertinent to handle sourcing in Brewtown. So a Lauber style handle is clearly visible in a 20's era MTF catalog and still shows up in a 31 cat as well thou in both it's a screwdriver while the bearing scraper illustration looks like a more conventional handle. Anyway, make of that what you want.

Reminds me of this driver many of you have… or Walker Jacks of Racine using Milwaukee’s American Grinder. / Blackhawk 1920’s sheet metal hand grip patent on their jack handles.

 

[Tapeguns]

An old socket display for a Snap-on truck. $28 on eBay. I just couldn't say no.

All the 3/8" drive sockets in my toolbox are a mix of different American brands from different periods that I've gathered from collecting. I would feel like a **** putting any socket on this rail that isn't a Snap-on Flank Drive. I didn't buy this rail to store an assortment of LIARS lol. So now I gotta get a set of old Flank Drives for it.

 

[Smokeshow69]

I found this the other day, while flipping through FBM

he had it listed as a tap and die set oddly, and while there was most of one in there among all the other stuff

there was what appeared to be a mostly complete, late 40s early 50s carb repair set

I had to add the ratchet and spinner from my stash, but I am not sure if the Carter carb parts where sold by SO as part of the set or not. The '50 cat sure looks like it, but earlier cats don't show those parts.

it even has some of the remaining decal left. Not sure what I am going to do about a key yet.

Dang, nice find on this carb set!

 

[Smokeshow69]

Hit up a sale the other day. Managed to find a few good snappy bits (ignore the plomb)....found a flexible extension I'm pretty sure is snappy and the socket extension is 9/32nds to 3/8ths...probably not super common I suppose? (paid $10 for everything in the photo)

 

[Snaparxon]

Hit up a sale the other day. Managed to find a few good snappy bits (ignore the plomb)....

Can't ignore that little Plomb ratchet, very hard to find. Did you get lucky and find a functional one?

 

[Smokeshow69]

Can't ignore that little Plomb ratchet, very hard to find. Did you get lucky and find a functional one?

Yes, the 4951 is a hard one to find for sure. The ratchet seems dirty inside so I will clean it up and then see if it works any better. It’s not bound up but also not great either but it also feels dry inside

 

[Farmer J.]

I got a 1981 new old stock 8 - 10mm open end wrench to replace one which went AWOL.. VOM810. Very pleased, as it matches the rest of mine which I got new in the early 1980's they all have the same underlined logo. It matches, except for the shiny chrome! There's an eBayUK seller with boxes of them..