Snap on hard handles, what would you put them on?

[RobertMo1988]

OK so I looked for so long everyday and every night for some of these handles. And recently some popped up about a month ago, I bought every one he had (which was only 4, $12 each) so I have 4 handles to make either ratchets or whatever i can. I am limited to what i can make since the handles are the same size as a sdd2 or a standard 3/8'' drive ratchet handle. So what would you guys make with them? 3 are the normal hard handles, one of the 3 has a dale earnhardt signature on it. The dale earnhardt is slightly smaller in squareness than the other two of the same style.And the 4th handle is a contour hard handle. i think contour is what they were called.

i was thinking on the newer handles
12"- 3/8 breaker bar.
a FH80
a THL72 (dale earnhardt)

but what would you put the older handle on?
or what would you suggest putting these on?

I have an older LSF720 1/2'' drive in 3/8'' that could clean up real nice with a new handle, it has a contour handle on it.

 

[JSBriggs]

Maybe a ......................FHNF100 or FHCNF72

-Jeff

 

[G1GRANDEUR]

You are the one that is going to look at it everyday, so you decide.

 

[kams1973]

those handles would work perfectly as screwdrivers

 

[justinmc]

those handles would work perfectly as screwdrivers

Blasphemy!

 

[NCCheesehead]

I'd put one on a kegerator tap handle

 

[W650Mike]

I'd put one on a kegerator tap handle

#3


Beer and Nascar. or is it Nascar and Beer?

 

[bart1]

You could do something like I did with my 14" long 1/4" drive extension and Hazet handle. Pretty handy.

 

[canuckian]

i'm putting one on the snow blower that's mounted to my tractor. the handle that controls the direction of the chute split in 2 so I'm going to drill a green one (JD tractor) out to put on it
I also put one on a 24 inch comfort handle breaker bar and will be putting on on a SHLF80 when I find one big enough. putting a yellow one on an FHNF100 as well.

 

[mlittle29]

Put it on Bottle opener or a Grill Spatula!

 

[JSBriggs]

You could do something like I did with my 14" long 1/4" drive extension and Hazet handle. Pretty handy.

Ohhhh, I like that! Did you do a write up on it?

-Jeff

 

[mlittle29]

For $34 you can get a new SO one

http://buy1.snapon.com/catalog/item.asp?search=true&item_ID=966&PartNo=TM9CS&group_id=23844&supersede=&store=snapon-store&tool=all

 

[bart1]

Ohhhh, I like that! Did you do a write up on it?

-Jeff

Nope. Just sent the broken screwdriver, a Wright extension and a few bucks to GJ member gj67stang and he whipped it out!

 

[PowerGenGuy]

I would put a bottle opener on one!

 

[jeffmoss26]

So would I!!

 

[Scout Driver]

Hotrod shift handle. Or, put one on a 3/8" drive extension.

Scott

 

[Machobuck]

Make a cool little shop knife

 

[jrherald420]

Is there anywhere to buy the old style handles besides Ebay?

 

[Steevo]

those handles would work perfectly as screwdrivers

As Larry the cable guy would say, "Now that's funny right there . . ."


http://www.google.com/url?sa=t&sour...sg=AFQjCNHgjFjAsyM24BicGB3K5cqIF6ysaw&cad=rja

 

[Rogue1987]

I think I'd put them on everything.