To avoid these ads, REGISTER NOW!

fire proof garage door

sfm1951

Well-known member
Joined
Apr 30, 2008
Messages
66
Location
Grand Rapid, MN.
I want to put a garage door between two parts in my shop( to seperate a new body shop and my fab shop. The wall is already up seperating the two.)
The insurance company says it has to be fire proof. I asked at the local lumber yard if they had a listing ,and they said they don't know of one. Anybody know of a maker of such a door? Thanks in advance, Steve
 
To avoid these ads, REGISTER NOW!

nehog

Well-known member
Joined
Jan 2, 2010
Messages
7,935
Location
Jaffrey, NH
Not cheap, but IIRC Grainger does carry rated doors. You need more info from your insurance company however: there are different ratings (time and temp.)
 

ishiboo

Well-known member
Joined
Oct 27, 2010
Messages
9,481
Location
Oshkosh, WI

jstroede

Well-known member
Joined
Oct 28, 2010
Messages
1,082
Location
Kansas City
Sectional overhead doors are hard to create a true fire rated door with. The problem is being able to make them close in event of a fire. The materials themselves are not the issue. Your best bet in this instance is going to be a rolling steel door.

John
 

wssix99

Well-known member
Joined
Mar 2, 2011
Messages
5,160
Location
Chicago, IL
You might search for a fire rated "barn door." They are widely available for industrial use and I'd think a sliding door would work great in your application and stay out of the way.
 

nehog

Well-known member
Joined
Jan 2, 2010
Messages
7,935
Location
Jaffrey, NH
Those are entry doors, he's looking for a garage door. Fire-rated entry doors are easy to find. :)
...

Ouch, thanks for pointing that out! I missed that issue entirely. :thumbup:

Now, a fire-proof garage door (roll-up) is going to be a bit more expensive! :shocking:
 

MoToys

Well-known member
Joined
Feb 12, 2011
Messages
1,534
Location
Long Island, NY
I want to put a garage door between two parts in my shop( to seperate a new body shop and my fab shop. The wall is already up seperating the two.)
The insurance company says it has to be fire proof. I asked at the local lumber yard if they had a listing ,and they said they don't know of one. Anybody know of a maker of such a door? Thanks in advance, Steve

You most likely will need a Metal Slat "service door". A roll up type with a system connected so it goes down when the fire system goes off.

Check out Alpine Door from East Setauket, NY. Any sales person over there can help you out.:thumbup:

LINKY: http://www.alpinedoors.com/products/fire-smoke-doors/
 

kbs2244

Well-known member
Joined
Nov 11, 2006
Messages
14,065
The only ones I have seen have been in an industrial setting.
They were sliding doors on tilted tracks with a melting fuse link so they were auto closing.
 

pattenp

Well-known member
Joined
Jun 4, 2008
Messages
10,175
Location
Virginia - USA
I've got to ask, why is the insurance co telling you that you have to have a fire proof door? Doesn't building code dictate what's needed? What has your local building official said? Can it be fire rated for a couple of hours instead of being fire proof?
 
Last edited:
To avoid these ads, REGISTER NOW!

6768rogues

Banned
Joined
Nov 28, 2007
Messages
4,524
Location
Western NY
Correct about not being fire proof, they are fire rated for a certain number of minutes. To have a fire rating, they need to be tested and listed, and installed as listed, using listed accessories, and it must be self closing in the event of a fire. Usually they are either sliding doors that are counter weighted and use a fusible link, or roll up doors that are gravity or electrically powered and triggered by fusible links and/or smoke detectors on either side of the door. I have seen them put up in tandem with regular doors, so the regular door functions daily and the fire rated door only drops in the event of a fire. You should find out the rating requirements before shopping, whether it be 1 hour, 2 hour, etc.
 
OP
S

sfm1951

Well-known member
Joined
Apr 30, 2008
Messages
66
Location
Grand Rapid, MN.
I should have said fire rated. The insurance company said it has to be fired rated for 90 minutes. This is being done in a Morton building and with fire code sheet rock all the way to the roof metal. The wall between the two parts already done when I bought the building.( I don't know why. Maybe they have had claims. They say these are things that have to be done before insuring it. ) Steve
 

White 99

Well-known member
Joined
Jul 5, 2009
Messages
285
Location
Northern CA
Might want to check with a different insurance company.

My old one dropped me and the next one seems better and is cheaper.
 
Last edited:

cvorkian

Active member
Joined
Sep 13, 2010
Messages
32
Location
NORCAL
check local fire code for all the specifics that they require.

ANY "fire rated" door will do.... I have seen MANY variations during my inspections and calls into businesses.

Steel doors (hollow or otherwise) are your best bet...
 

kbs2244

Well-known member
Joined
Nov 11, 2006
Messages
14,065
Any insurance company can make their own rules.
They don't HAVE to insure you.
 

BrunaRibeiro

New member
Joined
Feb 19, 2013
Messages
3
It sounds like they are saying that you need a door for people along with the garage door. As for fire proofing,there is fire proof paint. Check with a good paint dealer,not the large home centers they can't make special orders.Get in touch with your local authority and have them explain in detail what they really need to approve your project. Good luck
 
Last edited:

pmiranda

Well-known member
Joined
Jul 15, 2008
Messages
1,504
Location
Austin, TX
The IBC calls for maximum sqft of some uses. For example a storage garage can be much bigger than a service garage.
 

cyamaha2007

Well-known member
Joined
Apr 20, 2009
Messages
2,001
Location
St.Charles MO
My work has sliding doors to section off a area in a fire. They have a weight that is held by a piece of plastic. The plastic melts weight falls and slams the door with alarming speed.
 

Bondo

Well-known member
Joined
Dec 22, 2007
Messages
2,549
Location
Greenfield, Maine
Ayuh,.... A Steel door is pretty fireproof, regardless the configuration ya need,...

from a man-door, to a roll-up....
 

upndown

Well-known member
Joined
Dec 5, 2010
Messages
3,107
Location
Desert Hills/Peeples Valley AZ.
If this is a commercial application, find out what your code is, and follow that. I doubt this will be a DIY project considering you'll need to schedule the Fire Marshall to do a drop test!

If this is your private shop, find out exactly what the Ins. Co wants! How many garages have we seen here that have interior garage doors, I don't recall fire doors being an issue! I would hope they have Ins. In the mean time shop around, if they are still unreasonable tell them to pound sand..:beer:
 

Mattlt

Well-known member
Joined
Nov 30, 2005
Messages
1,382
Location
MN
Is there some way to mount two doors, back to back? Would that double the rating? Just asking... This one's new to me.
 
To avoid these ads, REGISTER NOW!
Top Bottom