HOT DEAL Index!!

[mroneeyedboh]

kthx

 

[markw365]

Sears has the 12 piece Lisle USA made torx sockets on sale. Were $35 now $15.

I've twisted a few of those off, replaced the T50 and T55 with snap on, no more problems. Not a fan of the Lisle after rebuilding a Mazda 2.3 in my daughters 3.

 

[jim2664258]

Is there any rhyme or reason to why you can do free shipping to store on Sears' website for some items and not others? Is it based on cost of the items you're buying? Just seems dumb to allow free ship to store but you have to go into the store to order it vs. just doing it on the website.

 

[therealwormey]

Is there any rhyme or reason to why you can do free shipping to store on Sears' website for some items and not others? Is it based on cost of the items you're buying? Just seems dumb to allow free ship to store but you have to go into the store to order it vs. just doing it on the website.

what a deal

 

[PeterT]

Add promo code SEARS2012 and it takes it down to $208.24.
Is this set worth it? The reviews say many have bought it for $199 on sale.

Put it in your cart and check again.

 

[acer66]

Thanks for the heads up. I had been looking at the 2.5 amp model for months now, just had not pulled the trigger on one. Stopped by Lowes tonight just to look at the one you mentioned, 3 amp model with the extra cutting kit. Went ahead and picked one up.

I was in same situation, I am glad that I waited.
I would have bought one without the tools less blade change but now that I have it, I like it.
This tool feels verry solid.

 

[RedFordTruck]

Add promo code SEARS2012 and it takes it down to $208.24.
Is this set worth it? The reviews say many have bought it for $199 on sale.

I got it in store a few months ago for $190 (Was $199, had a $10 coupon).

I Sold the 16 Chinese Ratcheting wrenches out of it for $80, so basically for $110 I got a 293 piece Craftsman set. Its a great addition to my tool box. Its got probably 50 pieces of filler (ignition wrenches, bits, etc), but its got 3 ratchets(I Made sure the set had USA made ratchets before I got it), Roughly 200 sockets (SAE, Metric, Regular, Deep, 1/2'', 3/8'' and 1/4'' drive), probably 15 hex bit sockets, 5 8-point sockets, and 5-6 extension bars.

I would buy it in store for $199, but look online for printable coupons before you go. Sell the Commie wrenches and for around $100 you'll be paying less than 50 cents each for Craftsman sockets!

 

[Ign]

I've twisted a few of those off, replaced the T50 and T55 with snap on, no more problems. Not a fan of the Lisle after rebuilding a Mazda 2.3 in my daughters 3.

Yeah, they do seem exceptionally soft. FWIW Lisle will warranty them all day long, or you're supposed to be able to swap at any retailer - I believe my local O'Reilly carries individual Lisle torx bits.

 

[fr0mastaj]

Bosch $20 off $100 or $40 off $200
Amazon is having a bosch qualifying tools sale with promo code PLNKE3ZI

 

[BJ42LX]

US Jack 3-ton Jack stands reg. 105.78 now $59.50

US Jack 6-ton Jack stands reg. 117.00 now $66.20

http://usjack.com/products.html

Shipping UPS ground is probably in the $20-$25 range per pair. My shipping was $22.49 for a pair of 6-ton stands.

This deal has been going on for a while, but I think it's worth posting again.

 

[volunteers]

I found nowhere to input the promotion code?

Bosch $20 off $100 or $40 off $200
Amazon is having a bosch qualifying tools sale with promo code PLNKE3ZI

 

[chappys4life]

The gearwrench 13 pc set is still 14.99 too.

I hated the lisle so bought a set of these havent had a chance to use them but they seem nice. Has anyone tried the gw hex bits? Need to replace my cman ones bad.

 

[StinkyBunny]

Sears has the 12 piece Lisle USA made torx sockets on sale. Were $35 now $15.

Reminder: Lisle USA made torx had very bad review.

One of the few tools that I have thrown. I think the whole set went about 100ft.

They are GARBAGE at any price.

If you use Lisle, which I will NEVER do again, wear eye protection. But not for the fact that I wear glasses I'd be a one eyed jack from those damned bits. I was trying to do the brakes on the 1 tonne Duramax and I sheared 3 of the ******* T55's off. I too have a Snap On one now.

 

[acer66]

I found nowhere to input the promotion code?

There should be a box called

Gift Cards & Promotional Codes:

right next to your billing information at the page where you review your order before you place the order.

I tried the code but it did not work for me.

Besides that Bosch has a promo going for 2 free batteries
http://www.boschbestbuilt.com/18vpromo/

 

[Burn1]

Gerstner and Sons is having their 32nd annual warehouse sale starting today May 12th. Some nice deals to be had.
http://www.gerstnerusa.com/WHSEsale2012.htm

 

[fr0mastaj]

There should be a box called right next to your billing information at the page where you review your order before you place the order.

I tried the code but it did not work for me.

Besides that Bosch has a promo going for 2 free batteries
http://www.boschbestbuilt.com/18vpromo/

I guess the code went dead. I was able to score a bosch jigsaw for $40 off!

 

[lennoxlennox]

sears mechanics tool sets on closeout - Craftsman Professional Sets

i'm not sure what other coupon codes will work on checkout here... but if this is your thing... have a look

(even at closeout...still seems expensive to me... ratcheting set looks interesting)

http://www.sears.com/tools-auto-mec...18?sbf=Clearance&sid=IAx20050830x000545&aff=Y

 

[lennoxlennox]

one more... an impact set http://www.sears.com/shc/s/p_10153_12605_00934130000P?sid=IAx20050830x000545&aff=Y

 

[see pictures]

Sears.com has the flex head gearwrench ratchets
1/4" $12.49.
3/8 $22.49
Sorry dont know how to post link from ipad

 

[wrh3]

Sears.com has the flex head gearwrench ratchets
1/4" $12.49.
3/8 $22.49
Sorry dont know how to post link from ipad

Here ya go (Thanks, good deal):

http://www.sears.com/gearwrench-1-4...87S2118019901P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/gearwrench-3-8...87S2118478701P?prdNo=8&blockNo=8&blockType=G8

 

[les_garten]

Here ya go (Thanks, good deal):

http://www.sears.com/gearwrench-1-4...87S2118019901P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/gearwrench-3-8...87S2118478701P?prdNo=8&blockNo=8&blockType=G8

How many teeth in these ratchets?

 

[wrh3]

How many teeth in these ratchets?

60 if they are like all the other Gearwrench ratchets I own....

[EDIT] http://gearwrench.com/catalog/ratchets_and_sockets/ratchets/cushion_grip/setdetails.jsp?part=81204

 

[azcactus]

Just cruising through the Lowe's site this morning and there's some pretty nice deals on some Kobalt hand tools. I have the stubbies, and the 20 piece / 40 piece mechanics tool sets and they are good quality.


Kobalt 6-Piece Stubby Metric Combination Wrench Set - 11.98

Kobalt 6-Piece Stubby SAE Combination Wrench Set - $14.97

Kobalt 20-Piece Standard/Metric Mechanics Tool Set with Case - $14.97

Kobalt 3-Piece Standard Polished Chrome Wrench Set - $9.98

Kobalt 10-Piece Metric 1/4" Drive 6-Point Socket Set - $9.98

Kobalt 10-Piece SAE 1/4" Drive 6-Point Socket Set - $9.98

Kobalt 21-Piece SpeedFit Socket and Hammer Set - 11.99

Kobalt 40-Piece Standard/Metric Mechanics Tool Set with Case - $29.99

Kobalt 27-Piece Standard 1/4-in and 3/8-in Drive Xtreme Access Socket Set - $24.97

Kobalt 138-Piece Standard/Metric Mechanics Tool Set with Case - $79.98

 

[shoturtle]

Sears.com has the flex head gearwrench ratchets
1/4" $12.49.
3/8 $22.49
Sorry dont know how to post link from ipad

on the iPad, open the page on a different tap. put your finger no the address bar till the magnifying glass appears. choose select all, the copy. Then go to you posting tab, and put you finger where you are typing till the magnifying glass and paste appear. then pick paste. That is how you put a link with the iPad.

 

[ShadowRuleZ]

Here ya go (Thanks, good deal):

http://www.sears.com/gearwrench-1-4...87S2118019901P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/gearwrench-3-8...87S2118478701P?prdNo=8&blockNo=8&blockType=G8

Gah, in for both. No more offsets or stubby, so I *had* to get the 3/8" passthru set so I could use the $5 coupon to offset shipping

 

[vw_tdi]

can anybody, off the top of their head, give me some good auto applications for the passthrough set? Since I haven't had the apparent need, I suppose I don't need it...but, just curious...

 

[warmpancakes]

can anybody, off the top of their head, give me some good auto applications for the passthrough set? Since I haven't had the apparent need, I suppose I don't need it...but, just curious...

exhaust manifold studs

 

[Buckgnarly]

can anybody, off the top of their head, give me some good auto applications for the passthrough set? Since I haven't had the apparent need, I suppose I don't need it...but, just curious...

Shock nuts

 

[vw_tdi]

Shock nuts

ah, that makes sense. I use a VW specific tool, but I see how a pass through would work...thanks!

 

[WRX/Z28]

Shock nuts

X2

I'm not sure how I would have gotten my rear springs out of my wrx without the gearwrench vortex set, at the very least, it would have take me significantly longer.

 

[RKA]

can anybody, off the top of their head, give me some good auto applications for the passthrough set? Since I haven't had the apparent need, I suppose I don't need it...but, just curious...

Sway bar end links.

 

[samg430]

gearwrench 1/4 drive ratchet $7.50
http://www.sears.com/shc/s/p_10153_12605_00992783000P?mv=rr

 

[Construct]

gearwrench 1/4 drive ratchet $7.50
http://www.sears.com/shc/s/p_10153_12605_00992783000P?mv=rr

I take it you haven't yet heard about the big GearWrench sale. I'll just leave this here: http://slickdeals.net/f/4300558-Gearwrench-hand-tools-madness-sale-50-80-Sears-com-online-only

Sorry about your wallet.

 

[ShadowRuleZ]

I take it you haven't yet heard about the big GearWrench sale. I'll just leave this here: http://slickdeals.net/f/4300558-Gearwrench-hand-tools-madness-sale-50-80-Sears-com-online-only

Sorry about your wallet.

Speaking of that link, any chance someone has a spare offset flex head or one they don't like they'd be willing to part with? This one: http://www.sears.com/shc/s/p_10153_12605_00992820000P?sid=IAx20050830x000545&aff=Y

 

[SCscoutguy]

I take it you haven't yet heard about the big GearWrench sale. I'll just leave this here: http://slickdeals.net/f/4300558-Gearwrench-hand-tools-madness-sale-50-80-Sears-com-online-only

Sorry about your wallet.

I take it since you are new you haven't actually read this thread to see all of that previously posted in this exact thread.

 

[mscribellito]

Haven't even left the house today and I've already spent too much money!

 

[warmpancakes]

Speaking of that link, any chance someone has a spare offset flex head or one they don't like they'd be willing to part with? This one: http://www.sears.com/shc/s/p_10153_12605_00992820000P?sid=IAx20050830x000545&aff=Y

I grabbed one installed a matco 88 kit I had not sure if im gonna keep it

 

[samg430]

I take it you haven't yet heard about the big GearWrench sale. I'll just leave this here: http://slickdeals.net/f/4300558-Gearwrench-hand-tools-madness-sale-50-80-Sears-com-online-only

Sorry about your wallet.

i'm sorry i didn't check to see if it was already posted. i will not post in this thread again.

 

[airmecha]

Here ya go (Thanks, good deal):

http://www.sears.com/gearwrench-1-4...87S2118019901P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/gearwrench-3-8...87S2118478701P?prdNo=8&blockNo=8&blockType=G8

Is it rlly a good deal.. ugh gw is killing me with these deals i want it

 

[motorcycle79]

Anyone have any coupon codes that work for the gearwrench stuff