Wilton Vise Parts Needed

[GarageDan]

Hi everyone!

I have a little 4 inch Wilton vise and I'm missing the nut and bolt assembly and the locking pad that locks the vise from swiveling. Anyone happen to have a broken vise that would be willing to help a fellor Garage Journaler or tell me where I could find these peices without paying an arm and a leg?

Thanks,
Danny

 

[GarageDan]

By the way, Wilton customer service couldn't help me.

 

[Toolhunter]

What is the model number on your vise

 

[C.BRAXMAIER]

Hi everyone!

I have a little 4 inch Wilton vise and I'm missing the nut and bolt assembly and the locking pad that locks the vise from swiveling. Anyone happen to have a broken vise that would be willing to help a fellor Garage Journaler or tell me where I could find these peices without paying an arm and a leg?

Thanks,
Danny

Ask autopts he should be able to point you in the right direction..

 

[GarageDan]

What is the model number on your vise

I think it is a 50504

Ask autopts he should be able to point you in the right direction..

autopts?

 

[Packard V8]

By the way, Wilton customer service couldn't help me.

Consider yourself fortunate. If they'd had the parts, once you heard their prices, you'd have needed to call 911 for a heart attack. New Wilton jaws cost more than I pay for used vises.

jack vines

 

[KMScott]

If some how you can tie your vise with this site you might be able to find what you are looking for. I have made these swivel handles and lock nuts before and can send a picture or two on how I did it if you want. Seems the going price if you can find the right one is $35.0 + for the lock nut and bolt assembly.
The cheapest way out is purchasing a carriage bolt and a acorn nut from your local hardware store. Wilton used this method on some of their vises.

http://www.ereplacementparts.com/wilton-vise-parts-c-32774_155485.html

Kevin

 

[GarageDan]

Thanks guys. I'm fine just bolting it together as I doubt I'll swivel it much. But, isn't is supposed to have some special little part under the bottom? Is that why you specifically said a carriage bolt?

 

[KMScott]

Sorry Dan,sounds like you are missing the inner ring to, that will capture the carriage bolt. Maybe Autopts has one for sale. He should catch up with you later.

 

[Sage55]

Have you tried http://wiltonviseparts.com/ ?

 

[GarageDan]

When I called Wilton they said they didn't have any parts available for that model.

 

[Toolhunter]

If its a open screw design amazon has the complete vise for $52 funny they couldnt get you parts