Show your new tool arrivals

[bull_duck]

Husky C301H 30 Gal Portable Air Compressor
More at here.

No, my C301H is neither committing suicide, nor being lynched by either good or bad folks. Rather, the C301H is making a soft landing from the bed of my F150 to its new home on the garage floor.

 

[peterblock]

A couple things I purchased in the last week or so

Sent from my DROID RAZR using Tapatalk 2

 

[Simz144]

1/2" locking flex head and a Wright Tool deep socket set.

how long is it?? and do you like it?

What de part number? look like 22-994 but on the web, it 12-944 ?

 

[mattamd_xp]

Gedore Kit came in today as I was on my way out the door to work. Sorry for the crappy cell phone pic. Didn't get much time to look it over. I'll follow up with how I like it once I have a chance to look it over and use it a bit.

 

[Nortonscustom]

Simz144,

It is 18.5" long. Part# is 12-944 it just looks funny in the picture.

Have only been using them for a week, but yes very happy with all of the ratchets. Fit/finish and build quality are 100%. Haven't really found a need for the locking head feature but they do lockup nice a tight if needed.

 

[sgs236]

Got this new on EBAY for 55.00 shipped. IR 302A

 

[TOOL_MONGER]

Not new... but new to me. Kid said it was 3 months old, guess I believe him cause there is not a scratch on it other than some smudge marks on bumpers. It looks like he only had tools in top and top 3 drawers.. anyway paid $550... I came to realize that I could not afford a "BIG" box so this will do till I can... Had bonus in one of the drawers... DRG

 

[wannab20hatch]

Nice score! how tall are the drawers? 4 inch?

 

[yogitech]

Not new... but new to me. Kid said it was 3 months old, guess I believe him cause there is not a scratch on it other than some smudge marks on bumpers. It looks like he only had tools in top and top 3 drawers.. anyway paid $550... I came to realize that I could not afford a "BIG" box so this will do till I can... Had bonus in one of the drawers... DRG

That's an awesome cart, good price too!!!

 

[TOOL_MONGER]

Nice score! how tall are the drawers? 4 inch?

I didn't measure but just tossed a few things in it before I came in for the night... top 3 drawers are a bit shallow... Deep well sockets had to go in 4th drawer...

 

[TOOL_MONGER]

That's an awesome cart, good price too!!!

Do yah think? He was asking $700... I did a really quick google search on it and it seemed like retail was around 1100.. to me used in 1/2 price... It was a facebook sale site and people were all over it so it was buy it or loose it... said his bottom was 600... offered him the 550 just to see if it was... he took it, so I think im pretty happy with it...

 

[ADSR]

Do yah think? He was asking $700... I did a really quick google search on it and it seemed like retail was around 1100.. to me used in 1/2 price... It was a facebook sale site and people were all over it so it was buy it or loose it... said his bottom was 600... offered him the 550 just to see if it was... he took it, so I think im pretty happy with it...

You did good. Looks in great shape!

 

[TOOL_MONGER]

Nice score! how tall are the drawers? 4 inch?

as per Matco
Overall Dimensions (W x H x D): 33.75'' x 39.5'' x 20''. 6 Drawers: Rows 1 - 3: 3'' depth, Rows 4 - 5: 4'' deep, Row 6: 5'' deep. Top tray under lid: 5'' deep. This deluxe full drawer service cart features the following: 4 bumpers that help prevent dents and dings. 4 5''x2'' casters with 2 locking and 2 non locking. Full extension roller bearing slides. Custom push handle. 2 gas pistons that serve as a lid stay as well as raising the cart lid when unlocked.

 

[Rural53]

This arrived in the mail today.



A couple of times lately I've needed one of these so I finally bit the bullet and bought one off Trade Me (NZ version of Ebay). Made in Japan and appears to be very well made.

 

[#1SomeGuy]

Pretty self explanatory

 

[Chadwilliam1]

nice with the boot to boot!

 

[#1SomeGuy]

nice with the boot to boot!

Yup

Pretty nice gun, gotta keep it safe.

 

[ATC]

4-piece funnel set. Couldn't pass it up for 79 cents.
3/4" drive ratchet. My usual one has a broken selector. Changing directions with pliers was getting old. And only $14.99
1/2" drive extendable ratchet. Didn't have one. Heard great reviews on this one, and for $15...couldn't pass it up either.
16oz Craftsman ball pien
1/4" Craftsman breaker bar. A warranty trade. This one is china But it will just sit in a drawer anways.

 

[DrivewayDave]

Picked up all these up a couple of days ago for $10, of course these are after cleanup pics. WW2 vintage Union Steel Corp 22" Machinist's Mate Cantilever Tool Box, Plomb sckts, Hog sckts, SR deep socket, Greatkneck wood handle screwdriver, Plomb speed wrench-frozen knurled palm nob, ss knife, & Bell yel handle flat blade scrwdrvr among them-red tote not included. Cleaned all up w/liq det, evaporust, lined w/Walmart Kit drawer liner & glued down w/3M spray adhesive, then oiled tool box down. Patina saved. love it.

 

[biscuit141]

Picked up this set of metric Craftsman drivers at the pawn shop today. I was going to buy them at the store with some store credit I have but for $10 out the door I thought these soft grip handles were much cooler than what is available today and they look nearly new.

 

[94m5]

Just got this in from back home in Illinois.

It was my Grandpa's and has probably been sitting in the back of his garage since he died in 84'. It's an 80 Gallon with the Kellogg 321 compressor pump and 3 horse 240 motor.

It also had a spare pump, and enough NOS internal components sitting in a milk crate to rebuild both pumps 3 or 4 times. (We're talking reeds, springs, valve seats, piston rings, crank seals gaskets.......You name it)

I was about to go buy a new Quincy and remembered this ol' girl sitting at my Uncle's house and called him up. Needless to say, it's in Colorado with me now and about to be compressing air after I Hydrostatic test the tank, and get it wired.

It'll be a welcome addition to replace my cheap 29 Gallon Craftsman.

 

[warmpancakes]

was shopping for a cart for the garage. SO driver had this in his way and made me a fair deal

kr655 came from original owner has a few character marks and some patina but a heavy solid box

 

[DrivewayDave]

Add'l pic of last tool purchase from me above that didn't get included but should have. 6" alum sq, tap & handle, & Burnz-O-Matic torch Nozzle.


View attachment 258569

 

[The Ratchet Man]

NOS Snap-On bit driver set.

 

[zer0cell]

Those nut drivers look very much like Kleins

 

[ADSR]

was shopping for a cart for the garage. SO driver had this in his way and made me a fair deal

kr655 came from original owner has a few character marks and some patina but a heavy solid box

Love it! Did you get good deal?

 

[amlv20]

New snappy ford powerstroke fuel pressure gauge set.

 

[Chadwilliam1]

Those nut drivers look very much like Kleins

I have that same set and they are identical to Kleins but I like the color of the craftsmans better I couldn't find a nos craftsman set when I bought an sae for the basement.

 

[NC-Fordguy]

was shopping for a cart for the garage. SO driver had this in his way and made me a fair deal

kr655 came from original owner has a few character marks and some patina but a heavy solid box

Nice

Do tell what you got it for

 

[ATC]

I have that same set and they are identical to Kleins but I like the color of the craftsmans better I couldn't find a nos craftsman set when I bought an sae for the basement.

I have a different set (I didn't know they made more than one...or maybe mine are older/newer?). Mine came with the box when I bought it...it is the SAE and Metric set in a soft case. You can also see my Kleins next to them.


[

 

[warmpancakes]

Nice

Do tell what you got it for

gave 500 for the box, its full of wrench racks and parts bins,

 

[BK13]

gave 500 for the box, its full of wrench racks and parts bins,

Dang! I believe that's worthy of a you ****! Nice box, man.

 

[jeffmoss26]

gave 500 for the box, its full of wrench racks and parts bins,

Let's see some more pics

 

[warmpancakes]

of the box or the random stuff that came in it?

 

[jeffmoss26]

Yes. LOL

 

[Quijote]

My recent craftsman purchase...

I should add that except for the maxx access set (China), everything was made in the USA.

 

[zkling]

1/4" Craftsman breaker bar. A warranty trade. This one is china But it will just sit in a drawer anways.

May I ask, how did you manage to break a 1/4" breaker bar?

was shopping for a cart for the garage.

Cart? Home garage? Wow, I hope it can hold up to that abuse

Are you going to try and find a matching top for it later on?

I think most folks home carts would be destroyed by getting hit by a car. Pretty sure yours would destroy the car and just shake it off

Yes. LOL

X2, both!

 

[kiatech]

Thanks Ash

 

[garthg]

For my motorcycle tool kit:

Knipex water pump pliers, 7". Better than the BMW (Heyco?). Light and strong. On sale. Not the Cobras which are pricey.
The LAST 1/4" to 3/8 Craftsman USA adapter. It was behind about 10 China units. (I carry a 1/4" ratchet and don't carry 3/8" sockets in my tool kit, but it could be handy).
Craftsman USA 14mm socket (1/4" drive).
Craftsman magnetic pickup. (VERY useful).

I noticed that the prices on the old labels had increased with new labels over it, but with points from Sears, I ended up getting the old price anyway.

My Sears still had several Craftsman USA 1/4" flex drivers ("breaker bar"), and quite a few Craftsman USA wrench and socket sets, but almost all the ratchets have gone to China or Taiwan, except for the Premium ratchet, at $50+.

 

[fordzilla90]

Scored this on craigslist for 50 bucks this week. It's a craftsman 10 inch contractor series. Think I did pretty good. All I need is a miter gauge, anybody have an extra?

Sent from my ADR6425LVW using Tapatalk 2