Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
ihateminimumwage
Well-known member
- Joined
- Jan 26, 2012
- Messages
- 3,960
A terrible pic of my craftsman professional score. I've been trying to get them for weeks and it finally let me add them to my shopping cart.
William Payne
Well-known member
I can't wait for them to arrive just ordered a set of Stahlwille 14/A series wrenches (imperial long series) These are new old stock they no longer make them.
Chadwilliam1
Well-known member
nice screwdriver set.
Trying to decide if this adapter set is a gimmick or not?
What is the adapter set used for? How does it work? (Can't tell from the photo of it)
You basically put the adapter in a specific sized ratcheting box wrench, and it turns it into a lower profile ratchet.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I got a couple things off the truck today. Amazing that this little bit costed 90 bux!
He had a used set of three 1/4" extensions that a guy traded in and offered em to me for 25 bux so I was like sure!! Damn impulse buys
The hex but is a 9mm that I needed to compete my set and I needed a good t47 torx
My craftsman air chuck decided to continue to blow thru air after I'd pull it off the stem til I would band it on the ground so I had to pick up one of them aswell
Sent from my iPhone using Tapatalk
He had a used set of three 1/4" extensions that a guy traded in and offered em to me for 25 bux so I was like sure!! Damn impulse buys
The hex but is a 9mm that I needed to compete my set and I needed a good t47 torx
My craftsman air chuck decided to continue to blow thru air after I'd pull it off the stem til I would band it on the ground so I had to pick up one of them aswell
Sent from my iPhone using Tapatalk
Hafen_Kafer
Well-known member
Chinese surface Plate
androy
Well-known member
My last trip to the snap-on truck ..
My last trip to the snap-on truck ..
Is that a Instinct Handle magnifying glass?
Hafen_Kafer
Well-known member
It's a pizza cutter
androy
Well-known member
free with 200 $ purchase
Exceller8
Well-known member
NastyN8
Member
androy
Well-known member
Exceller8
Well-known member
ihateminimumwage
Well-known member
- Joined
- Jan 26, 2012
- Messages
- 3,960
I'm jealous. How are you liking it so far?
NastyN8
Member
I love it! I ordered it when the 20% deal was running. I used it on a few fork lift PM's today. Primes easy, the flow rate, and cycle count settings are neat. I like that it has the long hose, a little hose clip on the side, and the flat base. It made the pallet jacks with around 40 grease fittings a brease. I was surprised how fast the high setting flows
upgrading
Well-known member
SK looks good.
Snap-on too.
eddie_fl
Member
Needed one for awhile, found one at Sears for $50.
My new in car screwdriver set.
Buddies SO driver replaced my damaged SR80 with the new SR80B. Very happy with the newer version.
Wayfastwhitie440
Well-known member
Oilpan86
Member
Picked up at Sams club half off. Only paid $10. Anybody have these? How do you like them?
FOCUS.FREAK
Well-known member
My dad has the bigger set. They are nice magnetic tips also the end you can Hamer on if you need to. Surprised you could get those. Most places are sold out or not available.
Sent from my SPH-L720 using Tapatalk
Sent from my SPH-L720 using Tapatalk
krdiesel03
Well-known member
New in the box C3 Power Planer!
eyeballengineer
Well-known member
- Joined
- Jan 31, 2014
- Messages
- 94
Picked up at Sams club half off. Only paid $10. Anybody have these? How do you like them?
I like mine, works good.
Wayfastwhitie440
Well-known member
IS that a new or old sale. Looks good though
canuckian
Well-known member
Latest shipment from Michigan...
eyeballengineer
Well-known member
- Joined
- Jan 31, 2014
- Messages
- 94
I just bought it but I think its an old sale he had leftover on the truck.
Brownsfan
Well-known member
Latest shipment from Michigan...
From tasty breakfast food? There is a tool pipe line from That state to the north(other Ohioans on here understand ) and Americas hat. Man I wish I had your tool collection. Mine is pretty damn extensive for what I would ever need but man. I think we need updated pics of your box.
Yup. My guy had that deal 1-3 months ago, can't remember exact time frame.
Buy the torx set and the the E-Torx set for free. Was a smoking deal, but I already have both sets.
He has some left overs "buy x, get y free" deals from time to time, but most "killer deals" like that are gone by the time I see him the next week. He does pre signup for some deals. Every once and awhile those deals are gone before they actually get stocked on the truck!
My guy rarely goes longer than a month with out some kind of "killer deal". He had some fold out brochures I looked at yesterday. Had lots of good deals coming up. Unfortunately none of them were something I would personally need, have a use for or don't already own. :-/
The Snap-on guy I had years ago was a good guy, but never ran any "killer deals". Either he didn't participate or Snap-on wasn't doing those kind of deals back then.
canuckian
Well-known member
Pipeline you say? Does it go below or around the customs office? Those guys are ruthless! It's like they dream up customs charges sometimes!
A lot of my purchases lately have been to build sets for my 2 boys. Also, some of the new arrivals are either sold or traded from time to time so the pics posted aren't necessarily of what's in my toolbox. I'll admit I have probably more tools in my own set than I need but hey, If I need a 36mm combination wrench or a 2 foot+ long screwdriver some day, I'm all set! 
jeffmoss26
Well-known member
Latest shipment from Michigan...
Need more info on the Swiss Army knife flash drives!!!