Show your new tool arrivals

[Codey]

Where did you pick the box up from?

The Stanley I ordered from Costco.ca. From the Montezumas I've seen it's virtually identical. The Grey bolt bin I found at a local industrial supply store. I'd been looking for one for quite some time and was pretty excited when I finally found one that didn't cost $300 with bins.

 

[90zcar]

"Red Bull"...how much did that clip tool run ya?

I notice that one has a v notch in it...what is the difference in that one versus the other u shape one like this lisle



Sent from my iPhone using Tapatalk

 

[pepi]

Received a new Helmet really a nice piece. Trading up from the 3M Speedglas, served me well but the Miller has obvious advantages that forces the change up, I'm jazzed.

 

[Codey]

My new to me Walter Maxi grinder 6170....seriously that thing is a monster

How do you like it? I'm looking for some new grinders, something that doesn't make your hands numb after a couple hours use.

 

[warmpancakes]

Fast shipping through UPS. It came from Wixom, MI which is only about three hours from me.

it passed through my work, the UPS comes to my work after it picks up at Ktool

 

[blair15951]

99 bucks! Norseman Hi-mo 190-AG, 1/16 thru 1/2 by 64ths, a-z, and 1-35:


and got these bad boys NIB both for 35!

 

[Red_Bull]

"Red Bull"...how much did that clip tool run ya?

I notice that one has a v notch in it...what is the difference in that one versus the other u shape one like this lisle



Sent from my iPhone using Tapatalk

like $30-35...I wondered that myself so I asked my driver. he said they are for clips that are found on door panels...he called them a Christmas tree clip like this...suppose to not break them but ill find out soon enough http://www.amazon.com/Panel-Retainer-Clips-Chrysler-6504014/dp/tech-data/B0040CRTK8
and the "U" shape is for clips like these http://www.ebay.com/itm/PUSH-PIN-RETAINER-CLIPS-NEW-Qty-20-/330588936019

 

[yaidunno]

Picked up some lower anvils for my soon to be english wheel. Hoosier profiles that a fella had for sale locally brand new.

 

[sunsation288]

How do you like it? I'm looking for some new grinders, something that doesn't make your hands numb after a couple hours use.

It's awesome ! , nothing compare to my metabo 4.5 inches , but one thing i don't like is the trigger with lock ..... I will look to remove the lock feature , hope my reply made sense

 

[Red_Bull]

hey blair where did you get those drill bits, that seems like a good deal to me

 

[heavyop]

Cat 3500 head bolt socket from snap on

1/4-1" Deep offset wrench set. Largest and smallest from ebay rest from the truck

Striking scraper that I still need to put a knife edge on

1/2" and down tap and die set. Kicking myself for not getting the 1" and down

 

[AndrewH]

and got these bad boys NIB both for 35!

Can you give me the item number for this set? I'd like to try and find one.

Thanks!

 

[Kengpk]

Excellence tools , I love it.

 

[Chadwilliam1]

99 bucks! Norseman Hi-mo 190-AG, 1/16 thru 1/2 by 64ths, a-z, and 1-35:

Where did you score that?

 

[AndrewH]

Just got home and it was waiting in my porch, very excited about this particular tool purchase! There's also a second XC Battery not pictured!

 

[90zcar]

like $30-35...I wondered that myself so I asked my driver. he said they are for clips that are found on door panels...he called them a Christmas tree clip like this...suppose to not break them but ill find out soon enough http://www.amazon.com/Panel-Retainer-Clips-Chrysler-6504014/dp/tech-data/B0040CRTK8

and the "U" shape is for clips like these http://www.ebay.com/itm/PUSH-PIN-RETAINER-CLIPS-NEW-Qty-20-/330588936019

Hmm..I thought they worked fine on em all...I dunno maybe I'll check one of those out


Sent from my iPhone using Tapatalk

 

[Red_Bull]

Yeah ive removed hundreds of door panels with the u shape but ive also broken alot of clips so I figured id give them a shot

 

[blair15951]

Can you give me the item number for this set? I'd like to try and find one.

Thanks!

I don't see a p/n for the set, but the 10in are 100-10 and the 7in are 100-07.
I got them off ebay... I searched for the p/ns on there.

 

[ADSR]

Just got home and it was waiting in my porch, very excited about this particular tool purchase! There's also a second XC Battery not pictured!

You're going to love it, bro. Mine has performed flawless!

 

[ADSR]

I don't see a p/n for the set, but the 10in are 100-10 and the 7in are 100-07.
I got them off ebay... I searched for the p/ns on there.

holy ****! I need those! Those look awesome!

 

[T_Roze]

Free!

Do tell!?

 

[north]

Used Stahlwille 3/8" ratchet from ebay.de.

 

[shopboy13]

Do tell!?

X2


Sent from my iPhone using Tapatalk

 

[atwageman]

Elora nut drivers 3mm thru 6mm. Made in Germany.

 

[NathanB]

More screwdrivers and a ratcheting stubby

 

[wittycow]

I have been happy with 2 other Carlyle ratchets, so I grabbed this one while on lunch today. They have dropped the prices on a bunch of there tools. This one was $19.99, I bought it under our shop account. Great finish and feel!

 

[shopboy13]

I have been happy with 2 other Carlyle ratchets, so I grabbed this one while on lunch today. They have dropped the prices on a bunch of there tools. This one was $19.99, I bought it under our shop account. Great finish and feel!

Hmmmm. I'll have to try one nest time I'm at napa. Thanks


Sent from my iPhone using Tapatalk

 

[jdmstr]

New Armstrong MAXX 88T 3/8 Drive Aerospace Ratchet

 

[Monte]

My new to me Walter Maxi grinder 6170....seriously that thing is a monster

nice looking Metabo

 

[Rom'S]

A new milwaukee in 12v, it's a good complement with a 18v model

And a trolley jack in aluminum

 

[aczr2k]

99 bucks! Norseman Hi-mo 190-AG, 1/16 thru 1/2 by 64ths, a-z, and 1-35:


and got these bad boys NIB both for 35!

Yes where did you get that deal on Norseman drill bits?

 

[Double J]

M12 3/8

 

[Caparris]

M12 3/8

Nice. I got one a few weeks ago. Love it. Ordered the impact driver yesterday too


Sent from my iPhone using Tapatalk

 

[F-Bobby]

A new milwaukee in 12v, it's a good complement with a 18v model

And a trolley jack in aluminum

That is a really nice looking jack. Mind if I ask where ya picked it up from and how much it was?

 

[top drive]

i have that jack - i got it at costco although in the uk - was 120 GBP inc taxes

its a cracker - lifts my "lifted" truck clean off the ground a side at a time - something that my old jack could never do- it lifts higher and lifts quicker than my old one - think its 5 pumps to max extension.

definantly from chiwan if COO is important to you .

 

[Diddly]

Picked up a fluke 88 off kijiji today, like new $80


There's always a right tool for the job, but usually one within reach that will work.

 

[Rom'S]

To F-Bobby >>> I had bought it on this site "www.master-outillage.com" but they don't deliver to USA, it cost 280€ ~> $384, it was a discount price.

Manufacturer site >>> http://www.kstools.eu/

 

[zkling]

Picked up a fluke 88 off kijiji today, like new $80


There's always a right tool for the job, but usually one within reach that will work.

Nice, enjoy it

and got these bad boys NIB both for 35!

What? Channellock makes locking pliers? Since when? COO? Details please.

 

[AndrewH]

What? Channellock makes locking pliers? Since when? COO? Details please.

They don't have them anymore, they were made by Grip On in Spain. Wish they still had them, love the color combo!

 

[Buckgnarly]

Yes where did you get that deal on Norseman drill bits?

X2, actually I think more than that now. What's the source of these already!?!