Found a deal on craigslist? - List Here!

[exmaxima1]

Re: Unisaw in Chicago South Subs---$250

I have never even heard of an 11 horse power table saw before

I'm guessing someone read the AMPS by mistake

 

[1Garageman]

Re: Unisaw in Chicago South Subs---$250

I'm guessing someone read the AMPS by mistake

No it says 11HP.

 

[amh]

Re: Unisaw in Chicago South Subs---$250

I would have expected the power plug/cord to be a bit beefier, though it is tough to tell for sure from pic if power cord/plug is 50A 220V capable. 11HP at 100% efficiency is ~8200W and accounting for losses the power would be closer to ~11000W which is 50A at 220V.

 

[PFSard]

Blacksmith shop closing-every thing must go (5416 E Calle del Medio,Phoenix, AZ)
http://phoenix.craigslist.org/evl/tls/4437505856.html

This could be an opportunity for someone. I have no idea if there are any deals here.

 

[exmaxima1]

Re: Unisaw in Chicago South Subs---$250

No it says 11HP.

There is no way to run an 11 HP motor on single phase power. Maybe it is 1.1 hp....

 

[1Garageman]

^^ I was looking up single phase motors. They do make single phase 10 and above horsepower motors.
Here is a 12 HP single phase.
http://www.globalindustrial.com/p/motors/ac-motors-2-phase/capacitor-start-motors/general-purpose-single-phase-motor-01218es1e215t-125hp-1800rpm-208-230-460v-215t-tefc

 

[exmaxima1]

^^ I was looking up single phase motors. They do make single phase 10 and above horsepower motors.
Here is a 12 HP single phase.
http://www.globalindustrial.com/p/motors/ac-motors-2-phase/capacitor-start-motors/general-purpose-single-phase-motor-01218es1e215t-125hp-1800rpm-208-230-460v-215t-tefc

Alright, but WHY would you have 11 horse on a 10-inch table saw??

 

[rice rocket]

So when it catches a knot, not only can it launch the wood, but if it gets caught against something, you can catapult the table saw itself. Think of it as a feature, not a liability.

 

[exmaxima1]

Re: Unisaw in Chicago South Subs---$250

No it says 11HP.

I'm thinking someone mis-read the motor plate. I found a pic of a vintage unisaw motor.

 

[exmaxima1]

Re: Unisaw in Chicago South Subs---$250

I'm thinking someone mis-read the motor plate. I found a pic of a vintage unisaw motor.

Ad was just update to "1.5 HP", which makes more sense.

http://chicago.craigslist.org/sox/tls/4436563688.html

If I didn't already have a Unisaw, I'd buy it...

 

[McLean]

Vice for $20. Anybody know anything about this one? I've never seen one like this.

http://charlotte.craigslist.org/tls/4436282967.html

Is it just me, or does this look like the makings for an awesome Tube Notcher?

 

[1Garageman]

http://columbus.craigslist.org/tls/4438644872.html

Vintage Wilton Shop King 3 1/2" Jaw Vise with Swivel Base & Hardy - $20 (Heath Ohio)

Jaws 3 1/2 inches
Max opening of Jaws 6 inches
When vise is at Max Opening, it is 16 inches long
Height is 6 inches.

 

[zkling]

A super cool (IMHO) SK top bottom tool box for $100.

http://dayton.craigslist.org/tls/4429500745.html

Is it just me, or does this look like the makings for an awesome Tube Notcher?

Exactly what I thought. Or some other type of fabricating jig.

There is no way to run an 11 HP motor on single phase power. Maybe it is 1.1 hp....

You must have missed the memo, they have out engineered physics. Did you not see the craftsman 11hp 110v 20gal air compressor?

 

[upgrading]

A super cool (IMHO) SK top bottom tool box for $100.

http://dayton.craigslist.org/tls/4429500745.html

That is real cool.

 

[Gareth68]

Not SK, but still seems like a cool old box for a hundo...


http://columbiamo.craigslist.org/tls/4403489187.html

 

[upgrading]

I can't believe the ad for the SK is still up.

Not SK, but still seems like a cool old box for a hundo...


http://columbiamo.craigslist.org/tls/4403489187.html

Too bad they didn't take better care of that Waterloo.
Looks like it has been listed for a while and one could get it for less than $100 maybe.

 

[sgs236]

Region: East

Location: Pittsburgh. PA

Item: Vintage Penncraft Toolbox

Price: $100

Link: http://pittsburgh.craigslist.org/tls/4437272501.html

Price is too high for me, but a still a very cool looking box.

 

[sgs236]

Region: East

Location: Pittsburgh. PA

Item: Custom made machinist solid mahogany wood tool box

Price: $220

Link: http://pittsburgh.craigslist.org/tls/4418472655.html

Top box only. Nice looking custom made toolbox

 

[noelalford]

http://houston.craigslist.org/clt/4440947197.html

 

[upgrading]

Just curious, but how much would one pay for one of those four drawer Dorman units ?

 

[Gareth68]

Just curious, but how much would one pay for one of those four drawer Dorman units ?

Here is someone on Ebay trying to get $50 apiece..

http://www.ebay.com/itm/Dorman-Draw...1165115868&pt=Motors_Automotive_Tools&vxp=mtr

 

[upgrading]

Here is someone on Ebay trying to get $50 apiece..

http://www.ebay.com/itm/Dorman-Draw...1165115868&pt=Motors_Automotive_Tools&vxp=mtr

Thanks.
Kind of pricey.

 

[upgrading]

44 Inch HF box.
Asking price is $250.

44inch 13 drawer roller tool box - $250 (weymouth)
selling harbor freight 44in 13 drawer roller tool box in almost like new shape box was only used for several months before put in storage call me if interested 250 OBO

http://boston.craigslist.org/sob/tls/4442909827.html

 

[upgrading]

Might not be a "hot deal" price wise, but it is somewhat cool.

Snap on Mini Tool Box - $300 (Lowell)
4 pieces Top, Bottom and 2 side boxes. Selling as a set -

http://boston.craigslist.org/nos/tls/4442696635.html

 

[1970W-30]

http://denver.craigslist.org/tls/4443291529.html

Denver area.
This is mine. I'll take as many pics as you need. Just taking up space and I want it gone. Make me an offer.

Vintage Snap On Engine diagnostic equipment:

LR-3175 Scope
MT-406 Volt Ohm Meter
MT-417 Secondary Tach Dwell
MT-431 Ignition Analyzer
MT-455 Timing Advance Meter
KRA 416C2C Instrument Stand

 

[luvmyglockfou]

5' tall vidmar cabs for $250
http://okaloosa.craigslist.org/tls/4442571086.html



Sent from my iPhone using Tapatalk

 

[UIUC-Mech-E]

Ok Chi-town, someone please grab this because I have a terrible time resisting $10 vintage power tools.

http://chicago.craigslist.org/nch/atq/4443700767.html

It's a Double A Products builders saw w/ a craftsman badge. They were made to be used as a a table saw or a radial arm saw. I would have grabbed it already except I don't need another saw with no tilting arbor.



(Insert catchy saying here)

 

[Aura]

old craftsman drill press - $100 (maplewood)
http://minneapolis.craigslist.org/ram/tls/4445604166.html

craftsman drill press works great.. three speed , sturdy base, im moving so it must move as well but not with me..

 

[larryq]

9 Inch Wilton for sale in San Jose CA. $150. Weighs 200 lbs per the listing.

http://sfbay.craigslist.org/sby/tls/4446170261.html

 

[larryq]

Sigh, another day, another Wilton I have no chance of getting to in time. But maybe *you* can!

http://sfbay.craigslist.org/eby/tls/4447961211.html

VISE- Bench- Wilton brand - $40

 

[macgee]

Sigh, another day, another Wilton I have no chance of getting to in time. But maybe *you* can!

http://sfbay.craigslist.org/eby/tls/4447961211.html

VISE- Bench- Wilton brand - $40

I have the exact same vise, these are probably the lowest quality vises Wilton ever made although I did put lipstick on mine to convince otherwise.

 

[macgee]

SAWSMITH 2000 TABLE SAW by SHOP SMITH.

With Diablo 10" x 60t blade plus original blades in very good condition.

For only $95

These are rare and it looks like one of the better versions too. I think the the orig. retail for this one was around $900

http://losangeles.craigslist.org/sgv/tls/4448473461.html

 

[1Garageman]

http://columbus.craigslist.org/tls/4437154292.html

Milwaukee Corded Sawzall - $40 (Carroll)

Seems like an awesome deal to me!

 

[elsensei]

Yeah. My deal. Lightly used compressor for about half off new.

http://sandiego.craigslist.org/csd/tls/4449359561.html

 

[1Garageman]

Yeah. My deal. Lightly used compressor for about half off new.

http://sandiego.craigslist.org/csd/tls/4449359561.html

It would be awesome to have a two stage compressor

 

[larryq]

Interesting TIG welder in SF Bay Area. Not sure if anyone could use? $200.

Tig Welder, Bench Model - $200 (fremont / union city / newark)

http://sfbay.craigslist.org/eby/tls/4451120955.html

 

[Evan(CA)]

9 Inch Wilton for sale in San Jose CA. $150. Weighs 200 lbs per the listing.

http://sfbay.craigslist.org/sby/tls/4446170261.html

WOW! Someone scored big time! I would have made the 8 hour round trip for that one...

 

[macgee]

Interesting TIG welder in SF Bay Area. Not sure if anyone could use? $200.

Tig Welder, Bench Model - $200 (fremont / union city / newark)

http://sfbay.craigslist.org/eby/tls/4451120955.html

That's an absolute score/steal for someone. The chuck alone can probably be sold for more, not to mention the the microscope and all the tooling and jig material.

Here's a video of it in action, this thing is worth way more:

 

[larryq]

Let's hope a local GJ member gets it...and remembers to post pics

 

[macgee]

Let's hope a local GJ member gets it...and remembers to post pics

I just been struggling with this. The more I look into it, the more i want it but I think there's a mis-print because these sell for $20k-$30,000

Too bad it's just a tad too far and currently have other projects and space to deal with.

I wouldn't be surprised if the welder portion is shot but the tooling/lathe portion is awesome and has lots of other uses. Still can't figure out if it's a horizontal lathe being stood on one side or it's a vertical lathe.

I wish I was closer.