mkIValh
Well-known member
LOL, did you need to bobcat to bring all the tools home?
Nice haul!
No, wasn't necessary
Thanks!
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
No, wasn't necessary
Thanks!
97tbird
Well-known member
Yea i've been eyeing them up for a few weeks now, got both of em for $12. Cant wait to try em out at work
aaronrkelly
Well-known member
....bought this import non contact thermometer....seems decent and it was cheap...like $15.
Bought the Hex Sockets for the extended 3/16"... which once I got home and tried to use it wouldn't fit in the screw. Turns out it is out of spec by 0.012 of an inch, which is just enough that it won't fit in the screw that I needed it to.
Qualitytools
Well-known member
Went to autozone today and got these. They reminded me of a tiny ratchet Mac tools has. Looks to be the same ones.
Nice, how much were they, if you don't mind me asking?
Rarified27
Well-known member
Gearwrench 57 piece 6-point 3/8 set. 84t. Taiwan.
$99
-15% off tools
- SAVE15
- surprise points
- weekly ad points
- $10 back in points
= ~$45.
I love playing the Sears SYW game!
Had this set years ago, but the ratchets kept auto reversing- tried every trick except clipping the spring with no luck.
The sockets/extensions were great and busted some seriously stuck stuff without any signs of wear.
Being able to pop the lid off to fit in the drawers was nice, but then I had to store it.
thewatusi
Well-known member
I tried out both ratchets this weekend and they seem to work well. Ive also had the 1/4 version for a while now with no issues.
Regardless, this set is a huge improvement over the hodgepodge of Craftsman I had been using.
Regardless, this set is a huge improvement over the hodgepodge of Craftsman I had been using.
stovebolt6
Well-known member
Past couple days. Needed a few ratchet upgrades, I got the Gray 1/2 and 3/8 flex to add to the one 3/8 I got last week. That Proto 1/4 is sweet!
Hex/torx stuff
Hex/torx stuff
aaronrkelly
Well-known member
Got this Wright ratchet in today.....3/8 drive in a 1/4 body.
Travisnd
Well-known member
Is that the 3430?
KamiCrit
Well-known member
Past couple days. Needed a few ratchet upgrades, I got the Gray 1/2 and 3/8 flex to add to the one 3/8 I got last week. That Proto 1/4 is sweet!
Hey nice ratchets! How are the Grays treating you? I recently got Gray ball end hex keys (SAE & Metric).
Got this Wright ratchet in today.....3/8 drive in a 1/4 body.
Nice! There's been a lot of talk here about those as of late!
stovebolt6
Well-known member
Hey nice ratchets! How are the Grays treating you? I recently got Gray ball end hex keys (SAE & Metric).
I love em, I recently found a place locally that stocks Gray stuff so naturally I found it as an excuse to replace some of my cheaper tools haha.
Canadian Charlie
Banned
Not really a tool but some staples for my air staple gun. 3000 staples and nails for 4 euros, so I bought 2 sets. You never know when the next time they will have them in stock.
d.mcfarland
Well-known member
Those are supposedly the smallest of their kind. They are less than $35 from Epsteins I believe and well worth it if you use it.
muddinguy
Well-known member
There is more to it but corporate snap in keeps jerking me around on the delivery date for the powercab. On a side note the rock and roll truck was following my s.o. Rep when he delivered this with his personal enclosed trailer. 
that rock and roll truck was sweet!
that rock and roll truck was sweet! K-Dog
Well-known member
Got this Wright ratchet in today.....3/8 drive in a 1/4 body.
How much and from where !?!
priceman1414
Well-known member
davethorik
Well-known member
Proto J9648C "screwdriver" at 27" long, just came from Epsteins over the weekend. Also got a set of Pratt-Read black pearl screwdrivers to replace mangled Jonnesway set at work.
Not from Epstein, I got this Wright #405 set of 1/2 drive SAE hex bit sockets.
Lastly, picked up a set #158 of Nu-Thred thread files, made in USA, off the 'bay. Has SAE, metric, and pipe threads as well.
Not from Epstein, I got this Wright #405 set of 1/2 drive SAE hex bit sockets.
Lastly, picked up a set #158 of Nu-Thred thread files, made in USA, off the 'bay. Has SAE, metric, and pipe threads as well.
Attachments
Askme42
Well-known member
Got this Wright ratchet in today.....3/8 drive in a 1/4 body.
Ok I'm sold. Gonna pick one up next time I go to epsteins.
MrJason
Well-known member
Posted in another thread, but these came in today.
Tested the 1/2" drive already and it's a good piece.
Jason
Sent from my SGH-M919 using Tapatalk
aaronrkelly
Well-known member
Yep...the 3430.
I didnt order from Epsteins cause I was only ordering this one item - I went eBay.
http://www.ebay.com/itm/141275485790?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
$30.99 with free shipping - 6 left.
I believe they make a flex head as well!
mkIValh
Well-known member
Ordered some parts from the Kubota dealer unfortunately they ordered the wrong parts so I bought this magnetic tray instead. The 5 position snap on screwdriver was a pawn shop find for $35.
Sent from my iPhone using Tapatalk
Jeepster425
Well-known member
Picked this up last week, buy the pliers and get the coffee mug free, but talked him into giving me the thermos, and then a shirt for the girlfriend, and finally a black hard handle screw driver handle cause I told him I was wanting to make a shift knob out of one.
Canadian Charlie
Banned
Not really a tool but some staples for my air staple gun. 3000 staples and nails for 4 euros, so I bought 2 sets. You never know when the next time they will have them in stock.
Like these 2 packs of staples were not enough (3000 pieces per pack) I went out this morning and picked up another 3 more packs. I think they should last me a life time, 5 packs = 15000 staples/nails
God please help me
Canadian Charlie
Banned
Just found these in my mailbox a couple of minutes ago. Like one set wasn't enough I ordered two. Now to find room in my toolbox for them and a reason to use them.
I am now a "Extreme Tool Hoarder"
I am now a "Extreme Tool Hoarder"
jeff g
Well-known member
Hi
from Lidl, not in the UK till the 23-6-14
have you got the PARKSIDE Electric Nailer / Stapler £17
going to get one next week.
Canadian Charlie
Banned
I have a air powered stapler (not Parkside). The Parkside stapler here is 23 euros
Not snap on but a few things I ordered after joining the forum. I still have a second set of the craftsman wrenches in route, as well as 5 channellock adjustable wrenches and a few other items. I'm cleaning out a bunch of junky tools, adding to the home box and then building a couple of car sets.
Thought these were usa made until they showed up
Thought these were usa made until they showed up
Last edited:
bobbycos
Well-known member
Just found these in my mailbox a couple of minutes ago. Like one set wasn't enough I ordered two. Now to find room in my toolbox for them and a reason to use them.
I am now a "Extreme Tool Hoarder"
join the club
at least our hoarding has a use, not like the tv shows where someone is hoarding old soup cans for 30 years
vandezand
Well-known member
vandezand
Well-known member
LOLOL! I make one post about these and they start popping up like wild fire!
Lol i pulled it outta the package any my wife was like you spent 30 dollars on this?
I was like yeah I need it to fix the car haha