Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
1950mercury
Well-known member
another genius set, $41 delivered 7-22mm.
value for money these are awesome, beat on a set for a year with no breakages, sold that set to a friend in need.
They make 2 sets that look just like that one is cr v and one is cr mo. The cr mo is the way to go part number starta with cm.
Kamanhart
Well-known member
Finally, after much awaited decision making I broke into the Milwaukee club. Came with a 2nd free xc4.0 battery that is on the charger. Out the door for 170.
Harrison2
Well-known member
these are the CR V, the extra 60 bucks for the CR MO i figured il just replace the common sizes with top brand if and when they do blow out but the last set I had was CR V and they never once blew out.
StackedDodge96
Well-known member
Finally got my Armstrong 1-1/4 wrench that I ordered from the hot deals section. Its my first armstrong product and it seems really nice! Good quality and finish plus American made. Also the $20 price tag helped 
another genius set, $41 delivered 7-22mm.
value for money these are awesome, beat on a set for a year with no breakages, sold that set to a friend in need.
Is that 3/8 or 1/2? whered you get em from?
Finally, after much awaited decision making I broke into the Milwaukee club. Came with a 2nd free xc4.0 battery that is on the charger. Out the door for 170.
well done!
Harrison2
Well-known member
3/8.
toolsource with a $5 coupon code found online.
the 6mms are available seperatly from handsontools.
Finally got my Armstrong 1-1/4 wrench that I ordered from the hot deals section. Its my first armstrong product and it seems really nice! Good quality and finish plus American made. Also the $20 price tag helped
We have a shop set of those from 1 1/2" up... Nice wrenches
bobbycos
Well-known member
another genius set, $41 delivered 7-22mm.
value for money these are awesome, beat on a set for a year with no breakages, sold that set to a friend in need.
I see fur on the side of the pic, is that the inspector
Askme42
Well-known member
We have a shop set of those from 1 1/2" up... Nice wrenches
Same here! I ordered them for my shop from McMaster-Carr. They don't even specify a brand or COO, I guess they just send whatever they have. I'm my case then sent Armstrong. Cool!
Tarheelgarage
Well-known member
Simple blue point seal puller and I got an extra short shaft rounded seal spoon pick...I use the **** outta these little things from diggin orings to fender liner clips and electrical connectors
Sent from my iPhone 5s using Tapatalk
What is the part number for the pick?
thanks,
THG
I looked it up cause now I want one... SGSR2AR Damn GJ
One of the cheapest things ur gonna buy off the snap on truck!
Don't get the 4 piece set unless I got money to burn because that short one is all ur gonna use
Sent from my iPhone 5s using Tapatalk
AutoMotoGuy
Active member
vandezand
Well-known member
I know some people "Konck" Craftsmen, but i love the fact that if it ever breaks or fails, they will give you a new one. Lifetime warranty!!!!
Those lobster claws!
thesilverone
Well-known member
I know some people "Konck" Craftsmen, but i love the fact that if it ever breaks or fails, they will give you a new one. Lifetime warranty!!!!
who let the lobster out of the cage!
thesilverone
Well-known member
Piece-it Pete
Well-known member
For those times one guy ain't enough for the job 
Pete
Pete
JKennedy
Well-known member
MagnumForce
Well-known member
Squares at Sears, another USA made product. I believe empire makes them.
Wrapitinbacon
Well-known member
- Joined
- Oct 18, 2013
- Messages
- 136
Saw the snappy man today... I never seem to walk away empty handed
Are the black sockets twist ones?
Sent from my iPhone 5s using Tapatalk
Wrapitinbacon
Well-known member
- Joined
- Oct 18, 2013
- Messages
- 136
They are the metric semi deep impacts...now that you mentioned the twist ones I want to pick up a set.
jeepboy4life
Well-known member
Birthday gift from my fiance, last set in the store made in the U.S.A. This is the perfect set for someone just getting started with tools. It fill all the holes my combo wrenches had. 3/16"-1" and 5mm to 20mm. Would like to get 21mm-25mm soon.
Attachments
cgv69
Well-known member
We'll see how that works out when Sears closes it doors for good within the next couple of years.I know some people "Konck" Craftsmen, but i love the fact that if it ever breaks or fails, they will give you a new one. Lifetime warranty!!!!
Tronyadorable
Banned
- Joined
- Sep 25, 2014
- Messages
- 1,170
You beat me to it.
I'd currently go with something along the lines of Gearwrench or Kobalt and feel safer. Also anything "Apex" is likely to outlive us all.
Tronyadorable
Banned
- Joined
- Sep 25, 2014
- Messages
- 1,170
I want to see you put that 2 3/16 in that Hazet boxSame here! I ordered them for my shop from McMaster-Carr. They don't even specify a brand or COO, I guess they just send whatever they have. I'm my case then sent Armstrong. Cool!
I've been looking for one of those boxes. Are they in the USA anywhere ?
I want to see you put that 2 3/16 in that Hazet box
I've been looking for one of those boxes. Are they in the USA anywhere ?
Yeah man that's quite a wrench. ;-) Armstrong too..I ordered it for work through McMaster-Carr and was pleasantly surprised -- they don't tell you who the tool manufacturer is gonna be, ya know?
I bought that cantilever box from a guy on eBay (edzerox - 100%) located in Hemet, CA. Even though his location is in SoCal, my item shipped from South San Francisco for some reason and I got it the next day (I live in the Bay Area). Was in original Hazet box. Gotta oil the hinges.
Crown Imperial
Well-known member
I had to bite the pillow on these SK NOS wrenches. $140, Kinda expensive but they will probably never be produced again. ASFAIK Gearwrench doesn't plan on making them. Don't know of any other manufacturer that makes these deep offset ratcheting wrenches. In the U.S. or overseas.
Last edited:
vandezand
Well-known member
I had to bite the pillow on these SK NOS wrenches. $140, Kinda expensive but they will probably never be produced again. ASFAIK Gearwrench doesn't plan on making them. Don't know of any other manufacturer that makes these deep offset ratcheting wrenches. In the U.S. or overseas.
What's the tooth count on those?
WhiskeyTangoFox
Well-known member
- Joined
- Mar 20, 2014
- Messages
- 77
90 tooth per this Amazon description
http://www.amazon.com/gp/aw/d/B000VMS9KU?pc_redir=1410437531&robot_redir=1
Crown Imperial
Well-known member
^ correcto.
The spring in the ratcheting mechanism is a bit stiff on the bigger sizes. I.e. not that easy to turn. Ain't no snap on.
The spring in the ratcheting mechanism is a bit stiff on the bigger sizes. I.e. not that easy to turn. Ain't no snap on.
3/8 impact adapter? You plan on really tightening those screws huh?
Yes, yes I do...