To avoid these ads, REGISTER NOW!

2014 Garage sale thread!

Status
Not open for further replies.
S

stage20

Well-known member
Joined
Nov 5, 2013
Messages
3,722
Location
pcola FL
jakemac said:
No need for a shrink to figure out what to do, just buy another box to keep them in. :evil:
Click to expand...

i was going to say that..... actually i just bought 2 more top chests and now they dont share a drawer with my cutters, needle nose and regular pliers. hahah.

i usually fill the box up, then start to sell off a few things here or there, then fill it up again. its a thrill.
 
To avoid these ads, REGISTER NOW!
C

classicJackets

Well-known member
Joined
Sep 26, 2014
Messages
448
Location
SE Michigan
Local Craiglist find, paid $100 for these Kennedy's:


In great shape. Nice and heavy. The guy bought them new when he was in high school.
 
Last edited:
OP
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,252
Location
The Badlands
Classic, he may have bought one of them in HS, but those are anywhere from a decade to 2 decades apart... :see:

Nice finds though! I'd have bought both and made two of my rollers match the tops! (I have two of the top box type rollers and the bottom's top and intermediate!)
 
B

beatcad

Well-known member
Joined
Sep 15, 2013
Messages
4,520
Location
NOVA
Outlawmws said:
Classic, he may have bought one of them in HS, but those are anywhere from a decade to 2 decades apart... :see:
Click to expand...

good call. i was thinking the same thing.
maybe its a young guy that bought them both used in high school.
bottom box is kennedy. 70s/80s/90s. maybe later than 70s 'cause i dont know when they started to offer red boxes:dunno:
top box? i'm trying to remember a kennedy that has drawer pulls like that:dunno:
i cannot.
top box handles/pulls look 60s maybe 70s.


and for 100 bucks i have 2 things to say
1) i wouldve jumped on that also
2) you ****
 
Last edited:
OP
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,252
Location
The Badlands
That top with those pulls is mid to late 50's possibly into the 60's, AFAIK.

My top and mid like the bottom I bought new early 80's IIR
 
C

classicJackets

Well-known member
Joined
Sep 26, 2014
Messages
448
Location
SE Michigan
I must've misunderstood the guy then. Or just remembered wrong :)
Here's some more shots if they'll help with age ID. No Kennedy badge anywhere I've seen yet.




Thanks!
Doug
 
Z

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
classicJackets said:
Local Craiglist find, paid $100 for these Kennedy's:

In great shape. Nice and heavy. The guy bought them new when he was in high school.
Click to expand...

Nice setup. :drool: Lookin' must have been sleeping that day.

Outlawmws said:
Classic, he may have bought one of them in HS, but those are anywhere from a decade to 2 decades apart... :see:

Nice finds though! I'd have bought both and made two of my rollers match the tops! (I have two of the top box type rollers and the bottom's top and intermediate!)
Click to expand...

Well in all fairness we don't know how long HS was for the seller. :lol_hitti

Smokeshow69 said:
To me the box pictured in the last post says mbc to me but I will let others confirm that...
Click to expand...

No, they are both kennedy boxes. The top is an old version of their classic 260
 
Last edited:
C

classicJackets

Well-known member
Joined
Sep 26, 2014
Messages
448
Location
SE Michigan
zkling said:
Nice setup. :drool: Lookin' must have been sleeping that day.
Click to expand...

These were in the Greenville area so luckily I beat him to them! Plus I saw them about 20 minutes after they were posted :lol_hitti So I was the first one to make an offer, needless to say. The top box alone weighs like 60 pounds, a little heavier than the Craftsman my parents gave me last year.. :pimpflash
 
B

bigcaddy

Well-known member
Joined
Jan 17, 2012
Messages
2,418
Location
Orange County/ San Fernando Valley
Well it turns out that Jakemac was right after all. Another weekend came and I couldn't help myself from going over to the neighbors house to buy more junk.

I could of sworn there would be nothing left to buy of any value but I guess I was wrong. This Rimac valve spring compressor was buried on the workbench and I've overlooked it every day I've been there

This is only one item from that day but goes to show what is still laying around the shop. Everything was taken apart, cleaned, painted, lubed and reassembled to like new.

Not bad for 5.00:drool:
 

Attachments

  • image.jpg
    image.jpg
    144.1 KB · Views: 100
To avoid these ads, REGISTER NOW!
D

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,028
Location
Pacific Northwest
BC: nice find and looks pristine for having been under a pile of stuff. maybe you can send your wife or dad over next time to buy stuff for you and prove Jake wrong. :bounce:
 
B

bigcaddy

Well-known member
Joined
Jan 17, 2012
Messages
2,418
Location
Orange County/ San Fernando Valley
drivesitfar said:
BC: nice find and looks pristine for having been under a pile of stuff. maybe you can send your wife or dad over next time to buy stuff for you and prove Jake wrong. :bounce:
Click to expand...

I didn't findit like that! I just treated it like any bench vise I would get my hands on and made it look like new

I've got some other items getting cleaned up now but I'll try to get a picture of everything from that day for the garage sale thread
 
S

Smokeshow69

Well-known member
Joined
Dec 7, 2012
Messages
8,383
Location
Pacific Northwest
Scored this crown top box for $20 from the p-shop. It even had it's original key. It had a bunch of stickers on it that I took off but it was too good to pass up. I think I will put it into use!





It did come with a kennedy key and lock mechanism that I have no use for so if someone can use it I will send it to you for free if you pay shipping.



Picked these up as well with the box. Total was $31 for everything. P&C sockets, proto brake bleeder wrench, proto doe, matco lady foot pry bar, Blackhawk flare nut wrench, mac impact socket, and a snap ring tool?? it has little tips like snap ring pliers and you screw the red handle in and out to open or close the jaws. Any one know what it is for and the manufacturer??


Also scored these in Washington this weekend for $4. Includes plvmb 9/16ths wrench, plvmb socket, 2 craftsman 1/2 metric sockets
 
C

classicJackets

Well-known member
Joined
Sep 26, 2014
Messages
448
Location
SE Michigan
you ****! That's an awesome box and can't believe it still has the original key. Makes you wonder how all that ended up in the pawn shop.
Great find!
 
S

Smokeshow69

Well-known member
Joined
Dec 7, 2012
Messages
8,383
Location
Pacific Northwest
classicJackets said:
you ****! That's an awesome box and can't believe it still has the original key. Makes you wonder how all that ended up in the pawn shop.
Great find!
Click to expand...

For sure it makes me wonder. They had $25 on it but I talked them down:drool: since it had so many stickers on it and needed to be cleaned up. I think some of the tools I got where probably part of that lot. I did not really need another box but for that price I could turn it down.:evil:
 
R

Redboy

Well-known member
Joined
Feb 6, 2014
Messages
166
Location
twin cities mn
drivesitfar suggested I post this one here...

$35 at Saks Fifth Ave, of all places! :)

attachment.php


attachment.php
 
D

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,028
Location
Pacific Northwest
RedBoy: can you feel the love over here yet? nice grinder by the way and the other stuff in the box looks like quality. so you say this Saks store was in Minnesota? is that the mall where it's so big you can see it from space?

again Welcome to GJ and enjoy reading the posts on this thread and you'll soon have a need for a lot more tools.
 
R

Redboy

Well-known member
Joined
Feb 6, 2014
Messages
166
Location
twin cities mn
drivesitfar said:
RedBoy: can you feel the love over here yet? nice grinder by the way and the other stuff in the box looks like quality. so you say this Saks store was in Minnesota? is that the mall where it's so big you can see it from space?

again Welcome to GJ and enjoy reading the posts on this thread and you'll soon have a need for a lot more tools.
Click to expand...
All this suckage... It's a weird kinda love, but I'm feelin' it! :D

Different Saks store, but did you know that the Mall of America is currently expanding? Because 4.87 million sqft of shopping isn't quite enough! :rolleyes:
 
N

nine4gmc

Well-known member
Joined
Mar 24, 2012
Messages
14,357
Location
Dallas
Good score Waggoner, I've been looking for one as well but they are always $200 + used around here...
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom