new additions
Do you mind if I ask what the part numbers are on these and where you bought them? I'm looking to invest in some nws pliers soon.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Do you mind if I ask what the part numbers are on these and where you bought them? I'm looking to invest in some nws pliers soon.
Farmtruck.
New member
- Joined
- Aug 18, 2014
- Messages
- 1
Matco extra long needle nose pliers.
Sent from my iPhone using Tapatalk
Is that a road Chest you have and if so could you put pictures up , and show your drawer layouts as I'm considering purchasing one.
Thanks .
canuckian
Well-known member
lol I wish! took me a looong time to find a set at a decent price and I had to buy the full screwdriver kit to get them! there is one member on here that I remeber had scored quite a few sets over time.So you are the Grinch that keeps buying up those out of production screwdriver shanks !
kiatech
Well-known member
kiatech
Well-known member
used for holding down the little ball&spring when assembling ratchets.
Christmas came early at my house (well kinda, I bought all the items over the past few months and they all shipped together.
What's the part number on that master screwdriver set ??
panknuckshovel
Well-known member
Thanks to panknuckshovel I found a Sears Outlet store near my place so I drove over there today to see what they had. Only item I found interesting was this 12 piece, 6 point combination wrench set. USA made.... I got it for $19.99. The set is SAE, to bad they didn't have any metric sets.
Keep hitting them and digging, scrounging and lurking. Scored 2 more to go with the one from earlier this week. The six points are also great if you are working on something that has nice fasteners like chrome or brass.
Attachments
Hey did you score any metric professional USA 13 piece sets?
panknuckshovel
Well-known member
No, but I don't need metric so I don't look for it. I can look though.
Qualitytools
Well-known member
Yes very nice indeed, what would be the equivalent size in Inches for that vice? I will have to save my $$ to get one.
Thanks for the link
neuralsnafu
Well-known member
Must have the absolute best for opening yer BEER!!!!!Gave in to the hype
tank4114
Well-known member
the part # are 775 and 775-3 i got those from bunnings in AUS they have them cheap $49 and $59 they must have got a big contract or something cause Australia is usually they last to have something that isnt been marked up beyond belief.
tank4114
Well-known member
also on the boots has anyone tried Adams boot shop in Winona MN i watch wrangle-star a bit and he switched over from white smoke jumpers that hes been wearing and really likes the adams he done a couple vids on them and one after he had been wearing them for a while i think he said there about 4-500$ for a custom fitted boot
im not sure if you guys gets yours custom fitted or buy off the shelf sizes
im not sure if you guys gets yours custom fitted or buy off the shelf sizes
canuckian
Well-known member
Congrats on the tools and especially on the new fiancé! She seems like a keeper!!
KamiCrit
Well-known member
Christmas haul from the pawnshops and ebay.
Proto:
1/2 drive extensions [5463] & [5461]
1/2 ratchet [5449]
3/8 drive ratchet [5249]
Screwdriver [9684]
Gray Tools:
3/8 ratchet [T88]
Chisel [C5]
3/8th wrench [060B]
Left is a Starrett stainless 6" rule [No. 1604R]
Right is a Fluke 179
Proto:
1/2 drive extensions [5463] & [5461]
1/2 ratchet [5449]
3/8 drive ratchet [5249]
Screwdriver [9684]
Gray Tools:
3/8 ratchet [T88]
Chisel [C5]
3/8th wrench [060B]
Left is a Starrett stainless 6" rule [No. 1604R]
Right is a Fluke 179
Attachments
Leaky88
Well-known member
Can't speak to 12V drill but I have a HD Bosch Hammer drill whose performance made me forget the price a long time ago. Just MHO. Leaky
kiatech
Well-known member
CudaChick1968
Member Emeritus
First off, my GJ Secret Santa bluebolt hooked me up with a VERY cool old Dake arbor press Model 001 along with new plates he fabbed up! His PM said he wants to see it powder coated so I'll probably have to oblige him.
My man Billy presented something I've wanted for awhile now, a bench-mounted lighted swivel magnifier.
Both will come in very handy in the shop!! Woo hooooo, new tools!
My man Billy presented something I've wanted for awhile now, a bench-mounted lighted swivel magnifier.
Both will come in very handy in the shop!! Woo hooooo, new tools!
Tronyadorable
Banned
- Joined
- Sep 25, 2014
- Messages
- 1,170
They'll go great with a Milwaukee(hoodie) and a DaFault coffee makerThose are awesome looking boots. I'll need to look them up
Trony i have a bad experience with a Milwaukee hoodie. I got suckered into buying one of the heated ones off the james oxygen truck and it basically felt like a normal hoodie with a awkward heavy battery on your side..needless to say im still cold laying on the ground under a trailer that dont fit in the shop.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
We normally don't exchange presents but my wife knew I wanted another Keter table. I bought one last year when they were about $40 and have been looking for another one on sale with no luck.
She surprised me with this today. What is really cool is it has the bench cookies and the toggle clamps in lieu of the bar clamps.
And, for my water drinking at work, she got me a Bubba Mug. Keeps cold for 12 hours, holds 52oz.
After all these 33 years, she still amazes me!
She surprised me with this today. What is really cool is it has the bench cookies and the toggle clamps in lieu of the bar clamps.
And, for my water drinking at work, she got me a Bubba Mug. Keeps cold for 12 hours, holds 52oz.
After all these 33 years, she still amazes me!
Attachments
Moose-LandTran
Well-known member
Bought myself a new Techangle:
https://scontent-a-lhr.**.fbcdn.net/hphotos-xap1/v/t1.0-9/10885510_422712491226063_5398907802968018288_n.jpg?oh=6fc95b3d6b9de363d88ab5ecbcd839f4&oe=54FF969A
https://scontent-a-lhr.**.fbcdn.net/hphotos-xap1/v/t1.0-9/10885510_422712491226063_5398907802968018288_n.jpg?oh=6fc95b3d6b9de363d88ab5ecbcd839f4&oe=54FF969A
K-Dog
Well-known member
santa was good to me today.
You cant see the end of it but the Makita is a 3/8 impact.
I also got this AP universal pressure tester thanks to Woot.
And my G.J.S.S. done me good too...
You cant see the end of it but the Makita is a 3/8 impact.
I also got this AP universal pressure tester thanks to Woot.
And my G.J.S.S. done me good too...
devoncoolman
Well-known member
The new tech angles are awsome torque wrenches.
they are called pitstops and cost about $160ishThose are awesome looking boots. I'll need to look them up
James
MechanicNamedJohn
Well-known member
- Joined
- Jun 3, 2010
- Messages
- 1,344
Moose-LandTran
Well-known member
Haven't even used this one yet, just wanted it while it was on special. (£120 off)
Should get some use when i overhaul my van's engine, looking forward to no having to set up an angle gauge 500 times!
Caparris
Well-known member
M18 2361 led flood light
Super bright. Wish the top handle was on opposite side but I still really like it
Super bright. Wish the top handle was on opposite side but I still really like it