To avoid these ads, REGISTER NOW!

MajorLeeGassole's Garage

OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
Sanded A LOT tonight. Huge mess, but nothing a fan and leaf lower couldn't handle. A few spots needed a little more mud, but I was able to prime the back wall. I need a taller ladder to get the edges along the ceiling.

9186477909_a1719c7b1a_z.jpg


9189274896_59891674a3_z.jpg
 
To avoid these ads, REGISTER NOW!
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
I am so disappointed by the quality and price of available cabinets from places like HD and Lowe's. I bought a pair of rolling 5-drawer Task Force cabinets from Lowe's a few years ago. They look nice, but I think the metal is too thin. I'm planning on taking them apart again to straighten things out and make a permanent solution to the ever-loosening drawer slides.

Why I am repairing vs replacing? I've checked a few manufacturer's cabinets and found them to have metal that's just as thin and likely to fall apart with every day use. Then I look at the price and just shake my head - even with my 10% veteran's discount at most places. I'm glad to see some of you can fork out money for some of these high end tool boxes, but I cannot. Even if I could, I couldn't justify paying that much money for metal boxes with drawers.

Just my 2¢

Sorry for the rant. I was sketching a few ideas and got online to see if Google results had changed in the last few hours. They haven't. ;)
 

Nostraquedeo

Well-known member
Joined
Oct 23, 2009
Messages
501
Looks good! Make sure you are using some sort of pressure treated lumber where the wood contacts the concrete. Also, don't leave any of the drywall touching concrete.
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
Looks good! Make sure you are using some sort of pressure treated lumber where the wood contacts the concrete. Also, don't leave any of the drywall touching concrete.

Thanks! Almost all the wood sits off the floor and what is in contact is towards the back. 1 stair post. Even the stringers are suspended/shimmed off the floor. I'm planning on a PVC or extruded baseboard so it should at least be water resistant and caulk will be used heavily in the installation to give a good seal between it and the floor. I placed 2x material on the floor for any drywall to sit on before hanging and shimmed behind the drywall where it was applied to the block, but it has always been dry. I had one oily spot from an accident on the old ledge along the back wall that got a heavy coat of sealer, even though it's going to be covered with wood. I don't want that seeping through the wood once it's done.
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
Borrowed ladder = I got the primer finished up to the ceiling. Since the ceilings are 12ft high, I couldn't see the imperfections where the wall meets the ceiling. I've decided to put something like a 1" cove moulding all around the garage for a nice, clean finish. My list of supplies is written up and I will hopefully find everything in one place today. 4 days off and a stocked fridge. ;)

Painting FYI: I bought the dark gray at Lowe's and the assistant talked my into buying Olympic One vs Valspar. I could not be more pleased. I painted over bare drywall and one coat could suffice (but I'll probably do 2, just to be sure).
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
I'm going to have an 8" shelf running along the 27' back wall. Any ideas what to display? I have a 1/18 Michael Schumacher/Ferrari collection, but no... that's staying indoors in the display case. I love Ferrari, F1, and WRC but don't drive anything special and own neither a Ferrari nor anything close to a rally car. ;)

I have a special idea for the large upper section of the back wall, but that's going to be a surprise.
 

jsherid1

Well-known member
Joined
May 28, 2009
Messages
1,272
Location
Lucas, TX
Looks fantastic, glad there is someone else as OCD about construction details as I am (looking at the garages on here there are quite a few of us). Thanks for your service to our country and you have the best screen name ever.
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
Thanks for the feedback! It's off by a few shades, but still listed in vintage Ferrari colors. ;) Once it warms up (-5F this morning) and my wife extends the budget, I'll get back to finishing things. It's amazing how many dings you get with 4 kids though. Nothing a little touch-up paint won't fix.
 
To avoid these ads, REGISTER NOW!

Chad G

Active member
Joined
Jan 6, 2014
Messages
37
I Love it!! all the drywall work will pay off every time you pull in and see the nice pretty walls.
 

LCG

Well-known member
Joined
May 27, 2012
Messages
512
Location
GDL :: MX
I read the entire thing while drinking some tea.
drinking_coffee.png


I see you have the same OCD and color taste than me :lol:
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
I finally got back to the garage for the last couple weeks and simply white-washed (actually, tan) the entire thing. I carpeted the stairs with gray outdoor carpet and rebuilt the small staircase to the other door and carpeted that as well. Trim, new blinds, rearranged a few things, etc. I have one dilemma though: I covered the ledge along the back wall and small cubby area with 1x pine and am trying to decide how to finish it. The sections are 8.5" wide and 24', 10' and 5'. I can paint it, but it's just going to show all the dust in a matter of hours. Do you think I should simply carpet it like the staircases? It's a very low pile exterior-grade carpet. I'll have to post some pics, but thought I'd get some ideas first.

I got rid of so much ****, including the OLD fridge. That got moved to the basement next to the freezer. You had to open the garage in the winter to get to it anyway, since the cars are too long and always blocked access to it. I have moved almost every item that was hanging on the walls underneath the stairs. They are easily accessible and I was able to mount and organize everything so nothing just got thrown in for concealment purposes only. The 4x8 folding ramp found a home on the narrow wall next to the main door and I simply hung hooks on the rungs to hang the motorcycle gear while not in use.

One reason why I simply repainted was due to the fact my four kids constantly chip the paint on the lower (dark) paint and it shows each and every time. Also, this is not going to be our last house, so I thought I'd make it nice, but neutral, for any possible buyers in the future.

I look forward to any suggestions anyone might have.
 

Mr. Roboto

Well-known member
Joined
Dec 11, 2012
Messages
2,161
Location
New Hampshire
Hard to tell from the picture, does that wood have a rounded edge on it now? I think I would probably stain it. If it's still a 90 degree corner, and you have a router, you could give it a nice finished look too.
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
Hard to tell from the picture, does that wood have a rounded edge on it now? I think I would probably stain it. If it's still a 90 degree corner, and you have a router, you could give it a nice finished look too.

Yes, it's still square. We get lots of wind and dust in the garage, so I thought it would be very apparent one day after cleaning it. I thought the carpet would hide that a bit more and I could just run the shop vac along it. I didn't even think of staining it though. I kept thinking paint.
 

Mr. Roboto

Well-known member
Joined
Dec 11, 2012
Messages
2,161
Location
New Hampshire
Yes, it's still square. We get lots of wind and dust in the garage, so I thought it would be very apparent one day after cleaning it. I thought the carpet would hide that a bit more and I could just run the shop vac along it. I didn't even think of staining it though. I kept thinking paint.

Carpet (to me) would look a little tacky there. The stain would make it look a nice and classy. You could cover it with some poly too so it would clean up nice and easy as well.
 
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
I haven't updated this page in awhile and it's cool to see the old garage. A lot has changed, including the passing of our beloved dog, Reagan. My wife left after 20 years, but I got 100% physical custody of my 4 awesome kids. Anyway, I thought I'd update with what the latest project has been.

My son bought a 1985 Honda Shadow 500 from our neighbor for $300. He wanted a project bike and then changed his mind, so I bought it off him. I tore it down to the bare frame and rebuilt it in 3 weeks. I'm no master like Gregor, but I'm having a blast with this project.
3245bbec5a26aa17bd36f353d9de68f3.jpg91fa5bb3a33031618dec49bcf840aa0b.jpg

Sent from my SM-G960U using Tapatalk
 

Attachments

  • 3245bbec5a26aa17bd36f353d9de68f3.jpg
    3245bbec5a26aa17bd36f353d9de68f3.jpg
    61.2 KB · Views: 0
  • 91fa5bb3a33031618dec49bcf840aa0b.jpg
    91fa5bb3a33031618dec49bcf840aa0b.jpg
    113.2 KB · Views: 0
OP
M

MajorLeeGassole

Well-known member
Joined
Apr 13, 2010
Messages
392
Location
Fairmont, WV
I just realized my motorcycle pic was after the divorce in 2016. A couple months shy of 20 years. I got all 4 kids and she just walked. And other things changed as well!





 
Last edited:
To avoid these ads, REGISTER NOW!
Top Bottom