Found a deal on craigslist? - List Here!

[macgee]

Steel Work Tool Table/Bench & Vise Heavy 1" Top - $225 (E. LA)

"The dimensions are 67" L x 22" W x 31" H with 1" thick top & heavily reinforced. The vise is also heavy duty."

It's a massively 1" thick steel table with a 5" Eron (Japan) Vise. $225 is cheap just for the table. Eron vises are actually pretty nice.

http://losangeles.craigslist.org/sgv/tls/5171632381.html

 

[Old_Buick]

Older snap on toolbox - $60

http://orangecounty.craigslist.org/tls/5174586084.html

 

[Old_Buick]

another toolbox....

http://orangecounty.craigslist.org/tls/5174710524.html

 

[Old_Buick]

craftsman...

http://orangecounty.craigslist.org/tls/5174591174.html

 

[Old_Buick]

the first and third one from the same seller

 

[Mr_P]

Saw this when browsing for free stuff near me, and it seems as though the price is right, but I am not interested in taking out all that concrete..... Maybe one of you from here would like the job....I mean, it's half of a new building.....

http://mobile.craigslist.org/zip/5132002103.html

Building size is roughly 30' x 60-70 feet. 10' to 13' pitch roof. I plan on building a house where this old building is so you can have for free if you take the concrete with you too. Must go asap 2517519898

 

[Jere]

http://akroncanton.craigslist.org/tls/5174593855.html

"I just helped clean a garage and have a metal lathe that I removed and put on my trailer. I was going to scrap it but a few people saw it on my trailer at the fax station and said it has value.
It probably weighs 1000 pounds. I'd sell it for $200 bug you would have to get it off my trailer. Also have a 5 foot tall heavy drill press for another $40"
Norton ohio

Seller seems pretty dense, but a good deal on a cone head floor press, and maybe a lathe... maybe just a electric motor and parts.

 

[timdp]

SF Bay area

Old bulk oil pump. Don't know if there is a "deal" to be had, but the pump looks to be in decent condition.

http://sfbay.craigslist.org/nby/gms/5175001987.html

 

[altersaddle]

Seems like a great deal for $20, if it's still available:

Region: Western Canada

Location: Burnaby

Item: Assorted vintage snap-on sockets in snap-on ferret toolbox

Price: $20

Link: http://vancouver.craigslist.ca/bnc/tls/5168517537.html

If I could get to Burnaby without spending all day and $100+, I'd get it.

Edited for region info - it's gone now so I can't snag the photos.

 

[CNGsaves]

^ ^ ^ REMINDER to you Newbies . . . . See 1st post for FORMAT of how to list.
INCLUDE pictures and ALL the information.

Region: Midwest USA

Location: Kansas City, KS

Item: Homart window fan (Sears Roebuck) 1/6 HP . . . COOL !!!

Price: $ 25

Link:
https://kansascity.craigslist.org/tls/5128498521.html

Someone in the area, go snag that COOL fan !! If would make great garage window fan. If I were closer it would already be gone.

 

[Old_Buick]

^ ^ ^ REMINDER to you Newbies . . . . See 1st post for FORMAT of how to list.
INCLUDE pictures and ALL the information.

Thanks for the heads up... I'll redo the posts!

 

[Old_Buick]

Region: West Coast USA

Location: Orange County, CA

Item: Older snap on toolbox

Price: $ 60

Link:
http://orangecounty.craigslist.org/tls/5174586084.html

 

[Old_Buick]

Region: West Coast USA

Location: Orange County, CA

Item: Craftsman toolbox

Price: $ 30

Link:
http://orangecounty.craigslist.org/tls/5174591174.html

 

[Old_Buick]

Region: West Coast USA

Location: Fullerton, CA

Item: Toolbox with Tools

Price: $ 60

Link:
http://orangecounty.craigslist.org/tls/5174710524.html

 

[Old_Buick]

Region: West Coast USA

Location: Garden Grove, CA

Item: 1930s 1940s Vintage Snap-On Tools tool box

Price: $ 40

Link:
http://orangecounty.craigslist.org/tls/5154432056.html

 

[coleman10]

I don't know if this is a good deal or not, but it sure is interesting. Never seen this one before.

Uni-Point X36-AF
Vintage machinery says the production year is 1959. Pretty cool.

http://miami.craigslist.org/mdc/tls/5131167344.html

 

[Shop Dad]

Those Uni-Points are the big daddy of radial arm saws. Northfield bought them and continued to sell under their name. It's an awful lot of exposed blade for me...

 

[macgee]

Those Uni-Points are the big daddy of radial arm saws. Northfield bought them and continued to sell under their name. It's an awful lot of exposed blade for me...

They are super nice but this joker is saying: "Table not included."; I wish him luck with that.

 

[Shop Dad]

I saw that. If he means the wood table that's one thing. If it's the base... Joker indeed.

Here is a nice vintage DeWalt 10" RAS outside Philly/southern NJ. $50

http://southjersey.craigslist.org/tls/5181080335.html

 

[larryq]

Two stage 80 gal Devilbiss compressor for $400 in Santa Clara CA:

http://sfbay.craigslist.org/sby/tls/5181491116.html

 

[tab2]

http://boston.craigslist.org/gbs/tls/5182401141.html

Come get the steal of the week on this barely used Snap-on 7 drawer rollaway, with roller bearing sliders, liners, and in nearly new condition! I've got the key, and it's ready to move into your garage.

Or, you can buy it new off the truck, for a mere $1115. Plus tax. That's $1184.69.
My box saves you nearly eight hundred bucks!

Your choice..full price, or way less than half price. And I can take credit cards or PayPal.

It's only four hundred bucks. Don't snooze--call now!

Here is the link for it on the Snap-On site. https://store.snapon.com/KRA2007-Series-Roll-Cabs-Roll-Cab-7-Drawers-Red-P650986.aspx

 

[xxaler]

European 6" for $25!

http://www.kijiji.ca/v-hand-tool/st...se/1096444663?enableSearchNavigationFlag=true

 

[Mohawk Dave]

European 6" for $25!

http://www.kijiji.ca/v-hand-tool/st...se/1096444663?enableSearchNavigationFlag=true

FPU from Poland. Good deal for sure.

 

[1Garageman]

European 6" for $25!

http://www.kijiji.ca/v-hand-tool/st...se/1096444663?enableSearchNavigationFlag=true

That is one heck of a deal.

I thought I would put the pictures of it on here because I don't see that lasting to long.

 

[S4cruiser]

What looks like a craftsman vice for 25.00. Too far for me...

http://columbia.craigslist.org/fod/5183534189.html

 

[macgee]

Unimat Lathe $150 (East Los Angeles, CA)

"Multifunctional extra attachments..very good shape"

Appears to have some tooling, I can see a chuck but may have other bits not in pic. I bet this will sell today, so get on it if you want it. It looks like it's in good shape. These are cool little jewelers lathe's.

http://losangeles.craigslist.org/sgv/tls/5185767516.html

 

[firworks]

Found a couple of vises:

Morgan Chicago 4" Vise - Chicago, IL 130$
http://chicago.craigslist.org/chc/tls/5169808422.html

Babco 5" Bench Vise - Peoria, IL 80$
http://peoria.craigslist.org/tls/5182086772.html

The Babco looks pretty cool. I haven't heard of them before but it looks like a nice big US vise.

 

[larryq]

Big time 3-phase grinder and pedestal for $100 in Oakland, CA

http://sfbay.craigslist.org/eby/tls/5167550031.html

 

[sgs236]

Region: East

Location: Pittsburgh

Item: Parts Bin

Price: 10.00

Link: http://pittsburgh.craigslist.org/tls/5188456089.html

 

[larryq]

Looks like a Reed vise for $30 in San Leandro CA. Weighs a good 50 lbs I'd guess.

http://sfbay.craigslist.org/eby/tls/5188337184.html

 

[Old_Buick]

Looks like a Reed vise for $30 in San Leandro CA. Weighs a good 50 lbs I'd guess.

http://sfbay.craigslist.org/eby/tls/5188337184.html

it always seems like the great vise deals are somewhere else!

 

[larryq]

Good working condition 20 Gal sanborn compressor for $60 in Concord CA. 125 psi.

http://sfbay.craigslist.org/eby/tls/5189881325.html

 

[schmelpboy]

This one is in the Chicagoland area not far from me, I sent the guy a message. I only need one, but you guys might want to get in on this. Heck of a deal on Dewalt Coil nailers.

http://chicago.craigslist.org/chc/tls/5190093198.html

 

[Evan(CA)]

This one is in the Chicagoland area not far from me, I sent the guy a message. I only need one, but you guys might want to get in on this. Heck of a deal on Dewalt Coil nailers.

http://chicago.craigslist.org/chc/tls/5190093198.html

Wow I'd take every last one he had for 75 each. Those are going to 200+ on ebay right now.

 

[larryq]

Looks like a nice, clean 80 gal / 2 stage compressor for $550 in Pt Richmond CA. Looks to have been very well cared for, and 'Made in the USA' (though that may just mean assembled here.)

http://sfbay.craigslist.org/eby/tls/5193962930.html

 

[Jere]

http://akroncanton.craigslist.org/tls/5194478342.html

I'm selling a big heavy duty industrial Vise,works good.Vise has a 6" wide jaw and probably weighs 100 lbs.it could use cleaned up or use it as is.I want $100.00 for it.NO TEXTING.. Please call before 830 pm.Thank You

Tallmadge Ohio outside of akron

 

[larryq]

USA made, steel parts cabinet for $75 in San Francisco:

Edit: Nice move, the guy raised the price to $125. Not so hot now...

http://sfbay.craigslist.org/sfc/tls/5193884229.html

 

[larryq]

Vintage radial arm saw for $100 in Pacifica, CA, 'fully operational'

http://sfbay.craigslist.org/pen/tls/5193511725.html

 

[Garage Junky]

"**** load of free caulk"


http://burlington.craigslist.org/zip/5193143459.html

Better than a **** load of free c*ck.

Who needs that much? holy ****!

 

[Jere]

Vintage bandsaw for $100 in Pacifica, CA, 'fully operational'

http://sfbay.craigslist.org/pen/tls/5193511725.html

....bandsaw ? ... I think that is a radio arm saw