Sunnex Rebate, Impacts, jacks, tool cart
- Thread starter kstools
- Start date
Go back a few pages for the place that sells them. Quality tools for less I think it was.
Same price as cpo with discount.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Thanks for those who posted they got rebates, been waiting for that before I ordered.
Cheapest price I could find was on jet.com (Amazon knockoff). Their price is $197.28 and they have a coupon code for $15 off $50 (code: 7C64BD2) bringing the total price to $182.28. Cheapest I could find.
Cheapest price I could find was on jet.com (Amazon knockoff). Their price is $197.28 and they have a coupon code for $15 off $50 (code: 7C64BD2) bringing the total price to $182.28. Cheapest I could find.
bcradio
Well-known member
Didn't get mine
sevensandeights
Well-known member
Thanks - I just did the same thing.
jeopardy98
Well-known member
Received my rebates today. Going to use them to buy the 3/8 set.
Strouty
Well-known member
For the guys that have received the master cards, could you let us know when you mailed your rebate in? Thanks.
jeopardy98
Well-known member
I mailed mine in about 2 weeks after it started.
coralnut
Banned
mailed 7/22/15.
delivered 7/27/15.
3 rebates 8/31/15.
35 days from delivery to delivery. that's 5 weeks, not 6.
now i've got $300 burning a hole in my pocket. time to buy beer.
delivered 7/27/15.
3 rebates 8/31/15.
35 days from delivery to delivery. that's 5 weeks, not 6.
now i've got $300 burning a hole in my pocket. time to buy beer.
Last edited:
Delfonik
Well-known member
Might depend on your location. Looks like these were bulk-shipped from a Prepaid card processor in Cincinatti, OH. I'm in GA and got mine yesterday, so they mailed it either this past Thursday or Friday.
I mailed my rebate on 7/10/2015.
bcradio
Well-known member
I sure hope so... I sent mine out at the beginning of July. I'll be very upset if they messed something up.
Can anyone recommend a decent 3/8 impact?
I'm not a pro so I don't need the best IR on the market. Just one that has enough power and won't break with diy usage. I'll admit I still use a Campbell Hausfield 1/2" from 90s. Maybe they made better back then.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I'm not a pro so I don't need the best IR on the market. Just one that has enough power and won't break with diy usage. I'll admit I still use a Campbell Hausfield 1/2" from 90s. Maybe they made better back then.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Burgerkong
Well-known member
Has anyone from Canada bought this yet?
Spn1025
Banned
Dewalt $78:
http://www.amazon.com/dp/B00OK3TLRQ/?tag=atomicindus08-20
Jet $97:
http://www.amazon.com/dp/B010P9X6R4/?tag=atomicindus08-20
Jet (butterfly grip?? looks weird) $35
http://www.amazon.com/dp/B00004T9MV/?tag=atomicindus08-20
Valley (cheap, probably not too good) $25
http://www.amazon.com/dp/B007OYYMH2/?tag=atomicindus08-20
Wilmar (cheap, weird butterfly grip also) $35
http://www.amazon.com/dp/B002KS93JE/?tag=atomicindus08-20
Well that's what I see for decent under $100, I'd probably pick the Dewalt.
jlipsky14
Well-known member
Im going to purchase a stubby/short 3/8 impact to go with my 3/8 master set.
Something like this
http://www.amazon.com/gp/product/B00G6KXUTG/?tag=atomicindus08-20
**** I think there was a thread about a deal on these a couple weeks ago.
I would prefer a smaller version as long as it has the power as the larger. I still have my 1/2 for larger needa.
Ill have to look at the M7 reviews. I think they make a few models.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
jlipsky14
Well-known member
Exactly, I mainly purchased the 3/8 for the swivel sockets so I feel the compact gun is a good way to go. I also have my ir 2135qtimax for anything the smaller one wont break free.
Strouty
Well-known member
I checked my rebate was received by sunex a lot later than I thought, August 17th. I mailed it the first week of August. I wonder if that is part of the game, let the mail sit for a few weeks before collecting it? Anyways I am looking forward to getting my rebates, I may order another two sets if I find a good enough deal.
I'm starting to wish I had gone with something like that. The M7 seems pretty well liked.
I actually got the Sunex Impact gun that is in this sale as well and it's starting to **** out... Half the time you pull the trigger nothing happens it just blows air. If you grab the end and spin it a little to get it going then it runs fine and for a pull or two it will work. Then it's back to just blowing air. I haven't contacted Sunex about it yet and am not really looking forward to it. I'll probably post a separate thread about it so people can see how it turns out.
Strouty
Well-known member
Try some air tool cleaner, sounds like the vanes are just gummed up. Did you buy it recently or is it older? I wasn't sure if you bought it when this sale started or if you all ready had it.
I bought it as part of the sale in... June or July. I've used it probably 4 times now and I oiled it before each use. I'll see about the air tool cleaner and if that helps the situation.
coralnut
Banned
i stapled 3 UPC to a single rebate form and included 2 printed receipts.
they figured it out.
they figured it out.
kunkernator
Well-known member
Just got my rebates in the mail today.
And for those who are curious, I put both my rebates on the same form. Got both back.
And for those who are curious, I put both my rebates on the same form. Got both back.
Just wanted to be clear that this company wasn't know for being sticklers about stupid **** like that. I mean, we are talking about up to $100/set here!
Got 2 of the master sets and applied some credit card cash back I had been saving....so after the 2 $100 rebates, my total was 11 bucks for 123 pieces.
flying eyeball
Well-known member
Just ordered a set the other day...glad to see folks getting their rebates.
bcradio
Well-known member
Received my rebate cards yesterday.
Iron-Iceberg
Well-known member
Got my rebate today. I was just starting to get worried. I guess they wanted to hold on to it till the last second.
Glad to see they are a good company.
Now off to buy more tools. LOL
Glad to see they are a good company.
Now off to buy more tools. LOL
Awesome deal, I'm glad I found this thread (my wallet isn't though). I ordered the 2569 and 3580 master kits. All I had before was a basic 1/2" impact metric set that I had to do a lot of improvising with when working on the cars, these new sets should help 
Hopefully the rebates go through now.
Hopefully the rebates go through now.coralnut
Banned
I bought all 3 sets. IMO the 1/2" sets are best if you do a lot of brake/suspension work. For me the 3/8" metric and inch master set has turned out to be the most useful in working on cars -- moreso than I expected it to be -- because it has all the swivels.
The swivels rock -- It's amazing how much easier life becomes when you have the right tool for the job.
The swivels rock -- It's amazing how much easier life becomes when you have the right tool for the job.
velillen01
Well-known member
I got my rebate back too. Looks like they probably send them in batches. Which im finding to be more and more common with rebates from all sorts of vendors.
Im still debating if i want the 1/2" master set or not. I have a tekton set that has worked just fine for me so far. Hmmm choices.
And i need to find a 3/8" impact. Hate using an adapter on my 1/2"
Im still debating if i want the 1/2" master set or not. I have a tekton set that has worked just fine for me so far. Hmmm choices.
And i need to find a 3/8" impact. Hate using an adapter on my 1/2"
Have the same problem, I think this forum can help me out with that haha.
Youngguns
Well-known member
Did we decide on the best place to buy the 3580 set?